Lathe check development and properties: effect of log soaking temperature, compression rate, cutting radius and cutting speed during peeling process of European beech (Fagus sylvatica L.) veneer

[1]  A. Dietzel,et al.  Quantification of cracks and cross-section weakening in sliced veneers , 2017, European Journal of Wood and Wood Products.

[2]  M. Hughes,et al.  Effect of Log Soaking and the Temperature of Peeling on the Properties of Rotary-Cut Birch (Betula pendula Roth) Veneer Bonded with Phenol-Formaldehyde Adhesive , 2016 .

[3]  M. Hughes,et al.  The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer , 2016, Wood Science and Technology.

[4]  M. Hughes,et al.  Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging , 2015, Wood Science and Technology.

[5]  W. Darmawan,et al.  Lathe check characteristics of fast growing sengon veneers and their effect on LVL glue-bond and bending strength , 2015 .

[6]  R. Collet,et al.  Numerical study of the influence of veneer lathe checks on the elastic mechanical properties of laminated veneer lumber (LVL) made of beech , 2015 .

[7]  P. Saranpää,et al.  The influence of felling season and log-soaking temperature on the wetting and phenol formaldehyde adhesive bonding characteristics of birch veneer , 2014 .

[8]  D. Sandberg,et al.  Influence of veneer orientation on shape stability of plane laminated veneer products , 2014 .

[9]  M. Hughes,et al.  The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde – bonded birch plywood , 2013 .

[10]  R. Marchal,et al.  The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies , 2013, European Journal of Wood and Wood Products.

[11]  Laurent Bléron,et al.  Online control of wood peeling process: Acoustical and vibratory measurements of lathe checks frequency , 2007, Annals of Forest Science.

[12]  Louis Etienne Denaud,et al.  Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency , 2011, European Journal of Wood and Wood Products.

[13]  Robert Collet,et al.  A Method of Lathe Checks Measurement; SMOF device and its software , 2010, European Journal of Wood and Wood Products.

[14]  Frédéric Mothe,et al.  Cutting forces in wood machining – Basics and applications in industrial processes. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture , 2009 .

[15]  Reijo Lappalainen,et al.  Ultrasound evaluation of lathe check depth in birch veneer , 2009, European Journal of Wood and Wood Products.

[16]  Terry Sellers,et al.  Plywood and Adhesive Technology , 1985 .

[17]  Michael F. Ashby,et al.  The fracture and toughness of woods , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[18]  G. Garrett,et al.  The effect of microstructure and stress state on the fracture behaviour of wood , 1983 .

[19]  J. F. Lutz.  Wood Veneer: Log Selection, Cutting, and Drying , 1978 .

[20]  Jaakko Meriluoto.  Raaka-ainetekijöiden vaikutus sorvatun koivuviilun määrään ja laatuun. , 1965 .

[21]  J. F. Lutz.  Heating veneer bolts to improve quality of Douglas-Fir plywood. , 1960 .

[22]  L. Leney.  A photographic study of veneer formation. , 1960 .

[23]  C. W. McMillin.  The relation of mechanical properties of wood and nosebar pressure in the production of veneer , 1958 .