Accuracy calibration of a 3-CRU translational parallel robot based on the subset of error measurements:

Robot accuracy calibration is an effective method to improve its kinematic accuracy. However, most of the existing calibration methods need to measure the complete set of 6-dimensional pose errors ...

[1]  Wyatt S. Newman,et al.  A new method for kinematic parameter calibration via laser line tracking , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[2]  Zhufeng Shao.  Self-calibration Method of Planar Flexible 3-RRR Parallel Manipulator , 2009 .

[3]  Tao Sun,et al.  Kinematic calibration of a 5-DoF parallel kinematic machine , 2016 .

[4]  Kuang-Chao Fan,et al.  Identification of strut and assembly errors of a 3-PRS serial-parallel machine tool , 2004 .

[5]  Yanzhi Zhao.  Determination and Synthesis of Translational Parallel Mechanism with Constant Jacobian Matrix , 2017 .

[6]  Tao Sun,et al.  Kinematic calibration of a 3-DoF rotational parallel manipulator using laser tracker , 2016 .

[7]  Yimin Song,et al.  Kinematic Calibration of Serial and Parallel Robots Based on Finite and Instantaneous Screw Theory , 2020, IEEE Transactions on Robotics.

[8]  Yan Jin,et al.  Effects of constraint errors on parallel manipulators with decoupled motion , 2006 .

[9]  Tian Huang,et al.  A Simple yet Effective Approach for Error Compensation of a Tripod-Based Parallel Kinematic Machine , 2000 .

[10]  Hanqi Zhuang,et al.  Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998 .

[11]  Johannes A. Soons.  On the Geometric and Thermal Errors of a Hexapod Machine Tool , 1999 .

[12]  J. J. Aguilar,et al.  Empirical analysis of the efficient use of geometric error identification in a machine tool by tracking measurement techniques , 2016 .

[13]  Yoshio Saito,et al.  Positioning Calibration of a Parallel Mechanism Worktable with 6-DOF , 2014 .

[14]  D. Chetwynd,et al.  A general and novel approach for parameter identification of 6-DOF parallel kinematic machines , 2005 .

[15]  Jorge Santolaria,et al.  Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements , 2012 .