Multifunctional Polymeric Phthalocyanine‐Coated Carbon Nanotubes for Efficient Redox Mediators of Lithium–Sulfur Batteries

[1]  Liqiang Mai,et al.  Ni Single Atoms on MoS2 Nanosheets Enabling Enhanced Kinetics of Li-S Batteries. , 2022, Small.

[2]  Jongsoon Kim,et al.  Crystallinity Regulated Functional Separator Based on Bimetallic NixFey Alloy Nanoparticles for Facilitated Redox Kinetics of Lithium–Sulfur Batteries , 2022, Advanced Functional Materials.

[3]  Ziheng Zhang,et al.  Regulating Li Uniform Deposition by Lithiophilic Interlayer as Li-ion Redistributor for Highly Stable Lithium Metal Batteries , 2022, Chemical Engineering Journal.

[4]  Qing Hou,et al.  Single-dispersed polyoxometalate clusters embedded on multilayer graphene as a bifunctional electrocatalyst for efficient Li-S batteries , 2022, Nature communications.

[5]  A. Manthiram,et al.  In Situ Grown 1T′‐MoTe2 Nanosheets on Carbon Nanotubes as an Efficient Electrocatalyst and Lithium Regulator for Stable Lithium–Sulfur Full Cells , 2021, Advanced Energy Materials.

[6]  Ruijin Meng,et al.  Size‐Dependent Cobalt Catalyst for Lithium Sulfur Batteries: From Single Atoms to Nanoclusters and Nanoparticles , 2021, Small methods.

[7]  S. Liang,et al.  Increasing Accessible Subsurface to Improving Rate Capability and Cycling Stability of Sodium‐Ion Batteries , 2021, Advanced materials.

[8]  Jeongyeon Lee,et al.  Tuning the Electrochemical Properties of Polymeric Cobalt Phthalocyanines for Efficient Water Splitting , 2021, Advanced Functional Materials.

[9]  M. Seo,et al.  Metal-Organic Frameworks Reinforce the Carbon Nanotube Sponge-Derived Robust Three-Dimensional Sulfur Host for Lithium-Sulfur Batteries. , 2021, ACS applied materials & interfaces.

[10]  L. Hultman,et al.  The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy , 2021, Scientific Reports.

[11]  Dongjiang Chen,et al.  In Situ Construction of Mo2 C Quantum Dots-Decorated CNT Networks as a Multifunctional Electrocatalyst for Advanced Lithium-Sulfur Batteries. , 2021, Small.

[12]  L. Mai,et al.  Metal-organic frameworks enable broad strategies for lithium-sulfur batteries , 2021, National science review.

[13]  H. Park,et al.  Multidimensional Hybrid Architecture Encapsulating Cobalt Oxide Nanoparticles into Carbon Nanotube Branched Nitrogen‐Doped Reduced Graphene Oxide Networks for Lithium–Sulfur Batteries , 2021, ENERGY & ENVIRONMENTAL MATERIALS.

[14]  Xuting Li,et al.  A trifunctional modified separator based on Fe tetraaminophthalocyanine@rGO for lithium-sulfur batteries , 2021 .

[15]  Dalin Sun,et al.  Constructing 1D/2D interwoven carbonous matrix to enable high-efficiency sulfur immobilization in Li-S battery , 2021, Energy Materials.

[16]  Xuting Li,et al.  Promoted deposition of three-dimensional Li2S on catalytic Co phthalocyanine nanorods for stable high-loading lithium-sulfur batteries. , 2020, ACS applied materials & interfaces.

[17]  Qiang Zhang,et al.  Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry , 2020 .

[18]  M. Biggs,et al.  Multiwall Carbon Nanotubes Covalently Modified by Cobalt (II) Tetraaminophthalocyanines as an Efficient Sulfur Redox Catalyst for High-performance Lithium-Sulfur Batteries. , 2020, ChemSusChem.

[19]  Hyunjoon Lee,et al.  Confinement of sulfur in the micropores of honeycomb-like carbon derived from lignin for lithium-sulfur battery cathode , 2020 .

[20]  Yong Lu,et al.  Prospects of organic electrode materials for practical lithium batteries , 2020, Nature Reviews Chemistry.

[21]  Senthilkumar Lakshmipathi,et al.  Cobalt phthalocyanine is a suitable scaffold for lithium polysulfide (Li2Sn n = 2–8) , 2020 .

[22]  Jinghua Guo,et al.  Identification of dual-active sites in cobalt phthalocyanine for electrochemical carbon dioxide reduction , 2020 .

[23]  Jingde Li,et al.  Low‐Bandgap Se‐Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High‐Performance Lithium–Sulfur Batteries , 2019, Advanced materials.

[24]  Chenglin Yan,et al.  Lithiophilic montmorillonite serves as lithium ion reservoir to facilitate uniform lithium deposition , 2019, Nature Communications.

[25]  Junhe Yang,et al.  Hierarchically Designed CNF/S−Cu/CNF Nonwoven Electrode as Free‐Standing Cathode for Lithium−Sulfur Batteries , 2019, Batteries & Supercaps.

[26]  A. Rogach,et al.  Electrochemical Techniques in Battery Research: A Tutorial for Nonelectrochemists , 2019, Advanced Energy Materials.

[27]  P. Li,et al.  Tailoring the Electronic Structure of Co2P by N Doping for Boosting Hydrogen Evolution Reaction at All pH Values , 2019, ACS Catalysis.

[28]  H. Park,et al.  Surface-Modified Sulfur Nanorods Immobilized on Radially Assembled Open-Porous Graphene Microspheres for Lithium-Sulfur Batteries. , 2019, ACS nano.

[29]  Lei Yu,et al.  2D Fe-containing cobalt phosphide/cobalt oxide lateral heterostructure with enhanced activity for oxygen evolution reaction , 2019, Nano Energy.

[30]  Yi‐Chun Lu,et al.  Solvent‐Mediated Li2S Electrodeposition: A Critical Manipulator in Lithium–Sulfur Batteries , 2018, Advanced Energy Materials.

[31]  Guangmin Zhou,et al.  Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect , 2017, Advanced science.

[32]  Qiang Zhang,et al.  Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries , 2017 .

[33]  Feng Li,et al.  More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects , 2017, Advanced materials.

[34]  K. Ryu,et al.  Study of the lithium diffusion properties and high rate performance of TiNb6O17 as an anode in lithium secondary battery , 2017, Scientific Reports.

[35]  Haihui Wang,et al.  A 3D Hybrid of Chemically Coupled Nickel Sulfide and Hollow Carbon Spheres for High Performance Lithium–Sulfur Batteries , 2017 .

[36]  Z. Tang,et al.  MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries , 2017, Advanced materials.

[37]  Feng Li,et al.  Conductive porous vanadium nitride/graphene composite as chemical anchor of polysulfides for lithium-sulfur batteries , 2017, Nature Communications.

[38]  E. Fortunato,et al.  Solution‐Processed Alkaline Lithium Oxide Dielectrics for Applications in n‐ and p‐Type Thin‐Film Transistors , 2016 .

[39]  U. Schubert,et al.  Polymer-Based Organic Batteries. , 2016, Chemical reviews.

[40]  L. Dai,et al.  Plasma-Engraved Co3 O4 Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction. , 2016, Angewandte Chemie.

[41]  Guangyuan Zheng,et al.  Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design , 2016, Nature Communications.

[42]  Frank Y. Fan,et al.  Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries , 2015, Advanced materials.

[43]  Ulrich S. Schubert,et al.  Carbonyls: Powerful Organic Materials for Secondary Batteries , 2015 .

[44]  A. Manthiram,et al.  Free-standing TiO2 nanowire-embedded graphene hybrid membrane for advanced Li/dissolved polysulfide batteries , 2015 .

[45]  A. Manthiram,et al.  A Polyethylene Glycol‐Supported Microporous Carbon Coating as a Polysulfide Trap for Utilizing Pure Sulfur Cathodes in Lithium–Sulfur Batteries , 2014, Advanced materials.

[46]  Kai Han,et al.  Free-standing nitrogen-doped graphene paper as electrodes for high-performance lithium/dissolved polysulfide batteries. , 2014, ChemSusChem.

[47]  Arumugam Manthiram,et al.  Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.

[48]  Chunsheng Wang,et al.  Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries , 2014 .

[49]  A. B. Fuertes,et al.  Sulfur-containing activated carbons with greatly reduced content of bottle neck pores for double-layer capacitors: a case study for pseudocapacitance detection , 2013 .

[50]  Jun Chen,et al.  Organic Electrode Materials for Rechargeable Lithium Batteries , 2012 .

[51]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[52]  Lei Wang,et al.  Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells , 2011 .

[53]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[54]  Zhi Yang,et al.  Single-walled carbon nanotube/cobalt phthalocyanine derivative hybrid material: preparation, characterization and its gas sensing properties , 2011 .

[55]  Á. Rubio,et al.  Copper-phthalocyanine based metal-organic interfaces: the effect of fluorination, the substrate, and its symmetry. , 2010, The Journal of chemical physics.

[56]  S. Grimme,et al.  A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. , 2010, The Journal of chemical physics.

[57]  M. L. Rodriguez-Mendez,et al.  Iron phthalocyanine in non-aqueous medium forming layer-by-layer films: growth mechanism, molecular architecture and applications. , 2010, Physical chemistry chemical physics : PCCP.

[58]  C. Liang,et al.  Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery , 2009 .

[59]  Sang-Cheol Han,et al.  Effect of Multiwalled Carbon Nanotubes on Electrochemical Properties of Lithium/Sulfur Rechargeable Batteries , 2003 .

[60]  A. Lichtenstein,et al.  First-principles calculations of electronic structure and spectra of strongly correlated systems: the LDA+U method , 1997 .

[61]  G. Kresse,et al.  Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set , 1996 .