Recrystallization, grain growth and austenite formation in cold rolled steels during intercritical annealing

[1]  M. Mazinani,et al.  The Influence of Microstructural Characteristics on Austenite Formation Kinetics in a Plain Carbon Steel , 2019, Metallurgical and Materials Transactions A.

[2]  Q. Yuan,et al.  Effect of cold rolling reduction on microstructure, mechanical properties, and texture of deep drawing dual-phase (DP) steel , 2019, Materials Research Express.

[3]  H. Mirzadeh,et al.  Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing , 2019, Materials Chemistry and Physics.

[4]  W. M. Rainforth,et al.  The formation mechanism of reverted austenite in Mn-based maraging steels , 2019, Journal of Materials Science.

[5]  X. Qiang,et al.  Evolution of Cementite in Hypoeutectoid Steel Wire during Cold Work Hardening in Rolling Process , 2018 .

[6]  Yang Cao,et al.  Microstructure and Mechanical Properties of a Cold-Rolled Ultrafine-Grained Dual-Phase Steel , 2018, Materials.

[7]  P. Maugis,et al.  Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels , 2018, Metallurgical and Materials Transactions A.

[8]  N. Tsuji,et al.  Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite , 2017 .

[9]  A. Kermanpur,et al.  Kinetics of Ferrite Recrystallization and Austenite Formation During Intercritical Annealing of the Cold-Rolled Ferrite/Martensite Duplex Structures , 2016, Metallurgical and Materials Transactions A.

[10]  Lizhan Han,et al.  Study on Austenitization Kinetics of SA508 Gr.3 Steel Based on Isoconversional Method , 2015 .

[11]  G. Rosenberg,et al.  Development of Cold-Rolled Dual-Phase Steels with Tensile Strength Above 1000 MPa and Good Bendability , 2015, Metallurgical and Materials Transactions A.

[12]  E. Emadoddin.  Effect of Cold Rolling on Annealing Behavior and Retained Austenite Characteristics of Multiphase CMnSi Steel , 2013 .

[13]  M. Calcagnotto,et al.  On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels , 2011, Metallurgical and Materials Transactions A.

[14]  S. E. Offerman,et al.  Austenite Nucleation and Growth Observed on the Level of Individual Grains by Three-Dimensional X-Ray Diffraction Microscopy , 2010 .

[15]  W. Sloof,et al.  Microstructural Features of Austenite Formation in C35 and C45 alloys , 2007 .

[16]  C. Kolan,et al.  Processing and properties of C–Mn steel with dual-phase microstructure , 2005 .

[17]  M. Perez.  Gibbs-Thomson effects in phase transformations , 2005 .

[18]  Dagoberto Brandão Santos,et al.  Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel , 2005 .

[19]  W. Poole,et al.  Austenite formation during intercritical annealing , 2004 .

[20]  L. Kestens,et al.  Recrystallization of a Cold Rolled Trip-assisted Steel during Reheating for Intercritical Annealling , 2001 .

[21]  E. B. Hawbolt,et al.  Modeling recovery and recrystallization kinetics in cold-rolled Ti-Nb stabilized interstitial-free steel , 1996 .

[22]  R. Tanaka,et al.  Effect of Austenitizing Treatment Followed by Slow Cooling on Graphitization in Hypo-Eutectoid Alloy Steels , 1987 .

[23]  N. Matsumura,et al.  Microstructure and the Mechanical Properties of Dual-phase Steel Produced by Intercritical Annealing of Lath Martensite , 1984 .

[24]  N. Matsumura,et al.  Microstructure and Mechanical Properties of Dual-phase Steel Produced by Intercritical Annealing of Lath Martensite , 1984 .

[25]  G. Purdy,et al.  Carbide Dissolution and Austenite Growth in the Intercritical Annealing of Fe–C–Mn Dual Phase Steels , 1984 .

[26]  A. Marder,et al.  Phase transformations in ferrous alloys , 1983 .

[27]  G. Speich,et al.  Formation of Austenite During Intercritical Annealing of Dual-Phase Steels , 1981 .

[28]  C. Wert.  Diffusion Coefficient of C in α -Iron , 1950 .