Operation of forearm support-type lift assist system (FOLAS) by using pneumatic pressure in air cushions

The objective of this study is to develop an operation method of forearm-support type lift assist system (FOLAS)using pneumatic pressure in air cushions. The FOLAS has air cushions, which work as a buffer between the machine and the user’s forearm, and the user’s operating intention can be indirectly detected by measuring the variation of the pneumatic pressure inside the air cushions. Force control to compensate the weight of a lifted object was adopted for the vertical operation of the FOLAS on the assumption that force applied to an air cushion has proportional relationship to pneumatic pressure in the air cushion. Position control using overlap length between movable cushion and fixed cushion was adopted for the horizontal operation, and the overlap length was estimated by the pneumatic pressure ratio in the air cushions. Independence between the vertical and horizontal operation manners that commonly utilize pneumatic pressure in the movable cushion was verified through basic experiments. An experiment for the operational performance showed that the FOLAS could be operated according to the operator’s intention. In an experiment for a lifting motion, the FOLAS could move continuously supporting the operator’s forearm and reduce the muscle activation of elbow muscle. Graphical Abstract

[1]  Michael A. Peshkin.  T15.1 Draft Standard for Trial Use for Intelligent Assist Devices - Personnel Safety Requirement , 2002 .

[2]  Taro Nakamura,et al.  Development of Soft Manipulator with Variable Rheological Joints and Pneumatic Sensor for Collision with Environment , 2008, J. Robotics Mechatronics.

[3]  Shinya Kajikawa,et al.  Development of human-friendly robot arm with adjustable joint compliance , 2010, 2010 11th International Conference on Control Automation Robotics & Vision.

[4]  Joel C. Perry,et al.  Real-Time Myoprocessors for a Neural Controlled Powered Exoskeleton Arm , 2006, IEEE Transactions on Biomedical Engineering.

[5]  Jesús Reviejo,et al.  A new manipulator structure for power-assist devices , 2010, Ind. Robot.

[6]  Akua Boabema Ofori-Boateng.  A Study of the Effect of Varying Air-Inflated Seat Cushion Parameters on Seating Comfort , 2003 .

[7]  Suwoong Lee,et al.  Power assist for lifting motion in sagittal plane by forearm support-type lift assist system (FOLAS) , 2011, 2011 11th International Conference on Control, Automation and Systems.

[8]  Ryojun Ikeura,et al.  Impedance characteristic of human arm for cooperative robot , 2002 .

[9]  Yoji Yamada,et al.  Highly soft viscoelastic robot skin with a contact object-location-sensing capability , 2005, IEEE Transactions on Industrial Electronics.

[10]  Manuel Armada,et al.  Power assist devices for installing plaster panels in construction , 2008 .

[11]  Yoshiyuki Sankai,et al.  Exoskeletal spine and shoulder girdle for full body exoskeletons with human versatility , 2011, 2011 IEEE International Conference on Robotics and Automation.

[12]  Homayoon Kazerooni.  Human Augmentation and Exoskeleton Systems in Berkeley , 2007, Int. J. Humanoid Robotics.

[13]  Clément Gosselin,et al.  General Model of Human-Robot Cooperation Using a Novel Velocity Based Variable Impedance Control , 2007, Second Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (WHC'07).

[14]  Y. Nakamura,et al.  A basic study of a pillow-shaped haptic device using a pneumatic actuator , 2008, 2008 5th International Symposium on Mechatronics and Its Applications.

[15]  A. Baltazar,et al.  Determination of surface mechanical properties using a hertzian contact and ultrasound sensor , 2010, 2010 IEEE International Ultrasonics Symposium.

[16]  T. Nakamura,et al.  Development of a soft manipulator with flexible joints using smart fluid and Pneumatics cushion for collision with human , 2007, 2007 IEEE/ASME international conference on advanced intelligent mechatronics.

[17]  Suwoong Lee,et al.  Development of forearm support-type lift assist system (FOLAS): System design for intuitive assist operation without wearing , 2010, ICCAS 2010.

[18]  Yoichi Hori,et al.  Force sensor-less power assist control for low friction systems , 2010, 2010 11th IEEE International Workshop on Advanced Motion Control (AMC).

[19]  Sehoon Oh,et al.  Generalized discussion on design of force-sensor-less Power Assist Control , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.

[20]  Suwoong Lee,et al.  System design for forearm support-type lift assist system (FOLAS): An intuitively-operated power assist system without wearing , 2010, 2010 IEEE/SICE International Symposium on System Integration.

[21]  Satoshi Iwaki,et al.  Touch sense control of an air pillow driven by a piston-cylinder mechanism , 2010, 2010 IEEE International Conference on Systems, Man and Cybernetics.

[22]  Hiroshi Kobayashi,et al.  Muscle Suit Development and Factory Application , 2009, Int. J. Autom. Technol..