LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore

Abstract In Singapore, 822,200 tonnes of plastic waste was generated in 2016, with only 7% recycled. Due to the complex nature of plastic waste mixtures, mechanical recycling is often inefficient, leading to a majority of waste being incinerated. In this article, alternative solutions are introduced to address the waste problem, such as recovering valuable fuels from plastics via thermochemical methods. Life cycle assessment (LCA) was adopted to investigate 8 scenarios of plastic waste management options. In a nation with land scarcity, the scales and sizes of each plastic waste recycling/recovery method is also taken into consideration. The results demonstrated how different combinations of four plastics valorization technologies, and associated capacities, affected the potential environmental benefits and drawbacks of plastic waste treatment systems. In order to enable selecting the best option among the 8 scenarios, normalization and weighting was carried out.

[1]  Sofia Ahlroth,et al.  The use of valuation and weighting sets in environmental impact assessment , 2014 .

[2]  T. Astrup,et al.  Incineration and co-combustion of waste: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[3]  Rana Pant,et al.  Integrated assessment of environmental impact of Europe in 2010: data sources and extrapolation strategies for calculating normalisation factors , 2015, The International Journal of Life Cycle Assessment.

[4]  R. Cossu,et al.  PLASMIX management: LCA of six possible scenarios. , 2017, Waste management.

[5]  Thomas P. Seager,et al.  Interpretation of comparative LCAs: external normalization and a method of mutual differences , 2017, The International Journal of Life Cycle Assessment.

[6]  B. W. Ang,et al.  A framework for evaluating Singapore’s energy security , 2015 .

[7]  Monia Niero,et al.  Review of LCA studies of solid waste management systems--part II: methodological guidance for a better practice. , 2014, Waste management.

[8]  Huai N. Cheng,et al.  Plastics to fuel: a review , 2016 .

[9]  Ole Jørgen Hanssen,et al.  Economic policy instruments for plastic waste , 2015 .

[10]  P. Tiwari,et al.  Valorization of packaging plastic waste by slow pyrolysis , 2018 .

[11]  Reginald B. H. Tan,et al.  LCI (Life cycle inventory) analysis of fuels and electricity generation in Singapore , 2010 .

[12]  Simonetta Tunesi,et al.  LCA of local strategies for energy recovery from waste in England, applied to a large municipal flow. , 2011, Waste management.

[13]  Nickolas J. Themelis,et al.  Transforming the Non-Recycled Plastics of New York City to Synthetic Oil , 2013 .

[14]  N. Juul,et al.  Economic and environmental optimization of waste treatment. , 2015, Waste management.

[15]  Forbes R McDougall,et al.  Integrated Solid Waste Management: A Lifecycle Inventory , 1995 .

[16]  Hsien Hui Khoo,et al.  Food waste conversion options in Singapore: environmental impacts based on an LCA perspective. , 2010, The Science of the total environment.

[17]  Reinout Heijungs,et al.  Bias in normalization: Causes, consequences, detection and remedies , 2007 .

[18]  Mario Grosso,et al.  Environmental evaluation of plastic waste management scenarios , 2014 .

[19]  Monia Niero,et al.  Review of LCA studies of solid waste management systems--part I: lessons learned and perspectives. , 2014, Waste management.

[20]  Roland Clift,et al.  A life cycle assessment data analysis toolkit for the design of novel processes – A case study for a thermal cracking process for mixed plastic waste , 2018 .

[21]  N. Ngadi,et al.  Current state and future prospects of plastic waste as source of fuel: A review , 2015 .

[22]  Mark A. J. Huijbregts,et al.  ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level , 2016, The International Journal of Life Cycle Assessment.

[23]  Bin Song,et al.  LCAs of a polycrystalline photovoltaic module and a wind turbine , 2011 .

[24]  Jia-Hong Kuo,et al.  Emission of carbon dioxide in municipal solid waste incineration in Taiwan: A comparison with thermal power plants , 2011 .

[25]  Raf Dewil,et al.  Gasification of plastic waste as waste-to-energy or waste-to-syngas recovery route , 2013 .

[26]  Dominique Guyonnet,et al.  Quantifying uncertainty in LCA-modelling of waste management systems. , 2012, Waste management.

[27]  Maria Laura Mastellone,et al.  A life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes , 2005 .

[28]  Maria Chiara Zanetti,et al.  Participatory approach, acceptability and transparency of waste management LCAs: case studies of Torino and Cuneo. , 2012, Waste management.

[29]  Yong Geng,et al.  The potential environmental gains from recycling waste plastics: simulation of transferring recycling and recovery technologies to Shenyang, China. , 2011, Waste management.

[30]  F. Fabry,et al.  Waste Gasification by Thermal Plasma: A Review , 2013 .

[31]  F. Abnisa,et al.  A review on pyrolysis of plastic wastes , 2016 .

[32]  Helge Brattebø,et al.  Influence of assumptions about household waste composition in waste management LCAs. , 2013, Waste management.

[33]  Ger Devlin,et al.  Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research , 2011 .

[34]  Julian Cleary,et al.  The incorporation of waste prevention activities into life cycle assessments of municipal solid waste management systems: methodological issues , 2010 .

[35]  S M Al-Salem,et al.  A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). , 2017, Journal of Environmental Management.

[36]  Anders Damgaard,et al.  Environmental performance of household waste management in Europe - An example of 7 countries. , 2017, Waste management.

[38]  Rana Pant,et al.  Supporting environmentally sound decisions for waste management with LCT and LCA , 2011 .

[39]  Göran Finnveden,et al.  Weighting and valuation in selected environmental systems analysis tools - suggestions for further developments , 2011 .

[40]  S. Harvey,et al.  Thermochemical recycling of plastics for production of chemical intermediates at a Swedish chemical complex site , 2016 .

[41]  Helmut Rechberger,et al.  Resource recovery from residual household waste: An application of exergy flow analysis and exergetic life cycle assessment. , 2015, Waste management.

[42]  Masaaki Fukushima,et al.  Toward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant , 2009 .