Thickness effect on repeated impact response of woven fabric composite plates

Abstract This paper presents an experimental investigation on the repeated impact response of woven E-glass/epoxy composites with various thicknesses. Energy profile diagrams of the samples, the variation of perforation thresholds with thickness and the variation of absorbed energy with repeat numbers are provided. Considering varied energy levels, the impact numbers causing complete perforation of the specimens are also depicted. Along with some images of the perforated samples for both single impact and repeated impact cases, the contour plots of the damage expansion with increasing impact numbers are also provided for better understanding. It is found that the perforation threshold/energy for single impact varies linearly with thickness for the chosen composite plates. Considering different energy levels, the impact numbers corresponding complete perforation of the specimens with different thicknesses, i.e. layer numbers, are also provided. It is found that the data points of the each thickness, using power regression, may be written as; E i = aN r b , where E i stands for impact energy, N r for the “repeat number of impact to perforation”, while a and b are the constants. The equations found enable to predict the number of impacts for perforation ( N r ) under smaller impact energies, without testing.

[1]  S. Monteiro,et al.  Effect of the laminate thickness on the composite strength to repeated low energy impacts , 2005 .

[2]  B. K. Sarkar,et al.  Impact fatigue of glass fibre: vinylester resin composites , 2001 .

[3]  S. Jeelani,et al.  Experimental investigations on the response of stitched/unstitched woven S2-glass/SC15 epoxy composites under single and repeated low velocity impact loading , 2003 .

[4]  F. Delale,et al.  Effect of repeated impacts on the response of plain-woven hybrid composites , 2010 .

[5]  B. M. Icten.  Repeated impact behavior of glass/epoxy laminates , 2009 .

[6]  Dahsin Liu,et al.  Impact response of woven composites with small weaving angles , 2008 .

[7]  William M. Banks,et al.  An experimental study of damage accumulation in balanced CFRP laminates due to repeated impact , 2008 .

[8]  Said Rechak,et al.  Modelling of damage and failure of glass/epoxy composite plates subject to impact fatigue , 2001 .

[9]  T. Sınmazçelik,et al.  On the life time prediction of repeatedly impacted thermoplastic matrix composites , 2009 .

[10]  Guy Pluvinage,et al.  Evaluation of impact fatigue damage in glass/epoxy composite laminate , 2010 .

[12]  J. Aurrekoetxea,et al.  Repeated low energy impact behaviour of self-reinforced polypropylene composites , 2011 .

[13]  Giovanni Belingardi,et al.  Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates , 2008 .

[14]  C. Atas,et al.  On the impact response of sandwich composites with cores of balsa wood and PVC foam , 2010 .

[15]  A. Rajendran,et al.  Low-velocity impact damage accumulation in woven S2-glass composite systems , 2006 .

[16]  R. Rao,et al.  Low-velocity Impact Characterization of Glass, Carbon and Kevlar Composites Using Repeated Drop Tests , 2004 .

[17]  D. Chakraborty,et al.  Response of Laminated FRP Composites under Multiple Impact Loading , 2005 .

[18]  S. Monteiro,et al.  Evaluation of repeated low energy impact damage in carbon–epoxy composite materials , 2005 .

[19]  Ling Zhu,et al.  DAMAGE ESTIMATE FOR PLATING OF SHIPS AND PLATFORMS UNDER REPEATED IMPACTS , 1996 .