Failure Mechanisms and Crack Propagation Paths in Thermally Aged Pb-Free Solder Interconnects

Studies were conducted on Pb-free solder interconnects after aging for up to 1,000 h at temperatures of up to 150°C and submitting to drop testing. Cracks were shown to propagate along interphase boundaries (bulk solder/Cu6Sn5, Cu6Sn5/Cu3Sn, Cu3Sn/Cu, and bulk solder/Ag3Sn) and along the bulk solder. Intergranular propagation in the solder was rarely observed, although cross sectioning showed evidence of that particular path. There is a transition in preferred crack propagation with aging time and temperature, from the intermetallic layer to the bulk solder. Sulfur was found in the fracture surfaces and may be a weakening agent in these solders.

[1]  J. Huh,et al.  Phase field simulations of morphological evolution and growth kinetics of solder reaction products , 2006 .

[2]  T. Mattila,et al.  Reliability of lead-free interconnections under consecutive thermal and mechanical loadings , 2006 .

[3]  Jorma Kivilahti,et al.  Failure mechanisms of lead-free chip scale package interconnections under fast mechanical loading , 2005 .

[4]  K. N. Subramanian,et al.  Physical metallurgy in lead-free electronic solder development , 2003 .

[5]  Y. L. Lin,et al.  Solid-state reactions between Ni and Sn–Ag–Cu solders with different Cu concentrations , 2005 .

[6]  Y. C. Chan,et al.  Interfacial reactions of BGA Sn–3.5%Ag–0.5%Cu and Sn–3.5%Ag solders during high-temperature aging with Ni/Au metallization , 2004 .

[7]  Hwa-Teng Lee,et al.  Influence of intermetallic compounds on the adhesive strength of solder joints , 2002 .

[8]  Wolfgang H. Müller,et al.  Morphology changes in solder joints--experimental evidence and physical understanding , 2004, Microelectron. Reliab..

[9]  Li Wang,et al.  The formation of nano-Ag3Sn particles on the intermetallic compounds during wetting reaction , 2005 .

[10]  M. Li,et al.  Interfacial microstructure evolution in Pb-free solder systems , 2003 .

[11]  Katsuaki Suganuma,et al.  Effects of intermetallic compounds on properties of Sn–Ag–Cu lead-free soldered joints , 2003 .

[12]  Haoran Ma,et al.  Microstructural evolution of Sn–9Zn–3Bi solder/Cu joint during long-term aging at 170 °C , 2004 .

[13]  Yi-Shao Lai,et al.  Experimental studies of board-level reliability of chip-scale packages subjected to JEDEC drop test condition , 2006, Microelectron. Reliab..

[14]  Li Wang,et al.  Intermetallic compounds growth between Sn–3.5Ag lead-free solder and Cu substrate by dipping method , 2005 .

[15]  C. Handwerker,et al.  Experimental and thermodynamic assessment of Sn-Ag-Cu solder alloys , 2000 .

[16]  Paul Conway,et al.  Characteristics of intermetallics and micromechanical properties during thermal ageing of Sn–Ag–Cu flip-chip solder interconnects , 2005 .