Parametric analysis of a residential building with phase change material (PCM)-enhanced drywall, precooling, and variable electric rates in a hot and dry climate

[1]  A. D. Solomon,et al.  Design criteria in PCM wall thermal storage , 1979 .

[2]  I. Walton.  The onset of cellular convection in a shallow two-dimensional container of fluid heated non-uniformly from below , 1983, Journal of Fluid Mechanics.

[3]  C. Benard,et al.  Experimental comparison of latent and sensible heat thermal walls , 1985 .

[4]  T. K. Stovall,et al.  What are the potential benefits of including latent storage in common wallboard , 1995 .

[5]  Drury B. Crawley,et al.  EnergyPlus: Energy simulation program , 2000 .

[6]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[7]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[8]  G. Doorman,et al.  Capacity subscription: solving the peak demand challenge in electricity markets , 2005, IEEE Transactions on Power Systems.

[9]  Craig Christensen,et al.  BEopt(TM) Software for Building Energy Optimization: Features and Capabilities , 2006 .

[10]  B. Rudolf,et al.  World Map of the Köppen-Geiger climate classification updated , 2006 .

[11]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[12]  Peter V. Nielsen,et al.  Air distribution in a room with ceiling-mounted diffusers : Comparison with wall-mounted diffuser, vertical ventilation, and displacement ventilation , 2006 .

[13]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[14]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[15]  Joseph Virgone,et al.  Optimization of a Phase Change Material Wallboard for Building Use , 2008 .

[16]  Richard E. Brown,et al.  Savings estimates for the United States Environmental Protection Agency's ENERGY STAR voluntary product labeling program , 2008 .

[17]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[18]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[19]  Wei Xiao,et al.  Analytical optimization of interior PCM for energy storage in a lightweight passive solar room , 2009 .

[20]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[21]  P. Denholm,et al.  Using Utility Load Data to Estimate Demand for Space Cooling and Potential for Shiftable Loads , 2012 .

[22]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[23]  Marcus Bianchi,et al.  Validation Methodology to Allow Simulated Peak Reduction and Energy Performance Analysis of Residential Building Envelope with Phase Change Materials: Preprint , 2012 .

[24]  Mario A. Medina,et al.  On the importance of the location of PCMs in building walls for enhanced thermal performance , 2013 .

[25]  Nitin Shukla,et al.  Cost Analysis of Simple Phase Change Material-Enhanced Building Envelopes in Southern U.S. Climates , 2013 .

[26]  Mattheos Santamouris,et al.  Passive cooling dissipation techniques for buildings and other structures: The state of the art , 2013 .

[27]  Luisa F. Cabeza,et al.  Building integration of PCM for natural cooling of buildings , 2013 .

[28]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[29]  Kaushik Biswas,et al.  Field Testing of Nano-PCM Enhanced Building Envelope Components , 2013 .

[30]  On an experimental innovative setup for the macro scale thermal analysis of materials: Application to the Phase Change Material (PCM) wallboards , 2013 .

[31]  Paulo Cesar Tabares-Velasco.  Energy Impacts of Nonlinear Behavior of Phase Change Materials When Applied to Opaque Building Envelopes , 2014 .

[32]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[33]  Som S Shrestha,et al.  Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard , 2014 .

[34]  Luisa F. Cabeza,et al.  PCM thermal energy storage tanks in heat pump system for space cooling , 2014 .

[35]  M. Hoeschele,et al.  Residential Mechanical Precooling , 2014 .

[36]  L. Domenech,et al.  Improvement of a heat pump based HVAC system with PCM thermal storage for cold accumulation and heat dissipation , 2014 .

[37]  M. A. Medina,et al.  Assessing the integration of a thin phase change material (PCM) layer in a residential building wall for heat transfer reduction and management , 2015 .

[38]  Vikas Chandan,et al.  Short Paper: Data Driven Pre-cooling for Peak Demand Reduction in Commercial Buildings , 2015, BuildSys@SenSys.

[39]  K. Sopian,et al.  Review of the application of phase change material for heating and domestic hot water systems , 2015 .

[40]  Jan Kośny,et al.  PCM-Enhanced Building Components , 2015 .

[41]  Yaping Cui,et al.  Heating , Ventilation and Air Conditioning ( ISHVAC ) and the 3 rd International Conference on Building Energy and Environment ( COBEE ) Review of Phase Change Materials Integrated in Building Walls for Energy Saving , 2015 .

[42]  Jean-Jacques Roux,et al.  Peak load reductions: Electric load shifting with mechanical pre-cooling of residential buildings with low thermal mass , 2015 .

[43]  B. Polly,et al.  Reduced-Order Modeling and Simulated Annealing Optimization for Efficient Residential Building Utility Bill Calibration , 2015 .

[44]  Michael E. Webber,et al.  Using BEopt (EnergyPlus) with energy audits and surveys to predict actual residential energy usage , 2015 .

[45]  Sassi Ben Nasrallah,et al.  Thermal properties of smart microencapsulated paraffin/plaster composites for the thermal regulation of buildings , 2015 .

[46]  Feng Xing,et al.  Energy and economic analysis of building integrated with PCM in different cities of China , 2016 .

[47]  Ahmet Sarı,et al.  Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings , 2016 .

[48]  Giuseppe Peter Vanoli,et al.  Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study , 2016 .

[49]  John L. Wilson,et al.  Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building , 2016 .

[50]  Miguel Azenha,et al.  Optimal behavior of responsive residential demand considering hybrid phase change materials , 2016 .

[51]  Behrouz Mohammad Kari,et al.  Cooling load reduction in office buildings of hot-arid climate, combining phase change materials and night purge ventilation , 2016 .

[52]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[53]  John L. Wilson,et al.  Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings , 2016 .

[54]  Baisong Ning,et al.  Ceiling fan air speeds around desks and office partitions , 2017 .

[55]  Luisa F. Cabeza,et al.  Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review , 2017 .

[56]  Xin Jin,et al.  User-preference-driven model predictive control of residential building loads and battery storage for demand response , 2017, 2017 American Control Conference (ACC).

[57]  John L. Wilson,et al.  Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events , 2017 .

[58]  Jérôme Henri Kämpf,et al.  Indoor thermal comfort assessment using different constructive solutions incorporating PCM , 2017 .

[59]  Patrick X.W. Zou,et al.  Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study , 2017 .

[60]  Luisa F. Cabeza,et al.  Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings , 2017 .

[61]  Marco Perino,et al.  Optimisation analysis of PCM-enhanced opaque building envelope components for the energy retrofitting of office buildings in Mediterranean climates , 2018 .