3D printed plano-freeform optics for non-coherent discontinuous beam shaping

The design, fabrication, and characterization of freeform optics for LED-based complex target irradiance distribution are challenging. Here, we investigate a 3D printing technology called Printoptical® technology in order to relax or push forward both the fabrication limits and LED-based applications of thick freeform lenses with small slope features. The freeform designs are carried out with an assumption of small-sized LED source using an existing point-source-based Tailoring method, which is available in the semi-commercial software. The numerical methods of the designs are characterized by ray-tracing software. The irradiance patterns of the 3D printed freeform lenses are promising considering the average shape conformity deviation of around ± 40 µm and center area surface roughness around ± 12 nm, which is to our knowledge by far the best result reported for 3D printed freeform lenses with a thickness greater than 1 mm. Applications of freeform lenses with discontinuous target irradiance distribution patterns are expected in eco-friendly energy efficient lighting such as in zebra-cross lighting.

[1]  Jani Tervo,et al.  Evaluation of freeform lens designs for specific target distributions and fabrication using 3D printing , 2015 .

[2]  Maunu Toiviainen,et al.  Manufacturing of freeform mirror by milling and altering its optical characteristics by Ns-laser polishing and ALD coatings , 2014, Optics & Photonics - Optical Engineering + Applications.

[3]  Sheng Liu,et al.  Effect of manufacturing defects on optical performance of discontinuous freeform lenses. , 2009, Optics express.

[4]  Fengzhou Fang,et al.  Design of freeform optics , 2013 .

[5]  Shinjiro Umezu,et al.  Development of the Improving Process for the 3D Printed Structure , 2017, Scientific Reports.

[6]  Jannick P Rolland,et al.  Fast freeform reflector generation usingsource-target maps. , 2010, Optics express.

[7]  Harald Ries,et al.  Tailored freeform optical surfaces. , 2002, Journal of the Optical Society of America. A, Optics, image science, and vision.

[8]  P. Maillard,et al.  3D printed freeform optical sensors for metrology application , 2015, SPIE Optical Systems Design.

[9]  Harald Giessen,et al.  Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing. , 2016, Optics letters.

[10]  Ching-Cherng Sun,et al.  Far-field condition for light-emitting diode arrays. , 2009, Applied optics.

[11]  Jong Kyu Kim,et al.  Solid-State Light Sources Getting Smart , 2005, Science.

[12]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[13]  Harald Giessen,et al.  Two-photon direct laser writing of ultracompact multi-lens objectives , 2016, Nature Photonics.

[14]  R. Angel,et al.  Freeform Illumination Design with Cartograms , 2015 .

[15]  Fengzhou Fang,et al.  Manufacturing and measurement of freeform optics , 2013 .

[16]  Luo Yi,et al.  A fast feedback method to design easy-molding freeform optical system with uniform illuminance and high light control efficiency. , 2013, Optics express.

[17]  Pablo Benítez,et al.  Freeform aplanatic systems as a limiting case of SMS. , 2016, Optics express.