Supercritical CO2 as an exfoliating aid for nanocomposite preparation: Comparison of different processing methodologies

This article examines several new methods for compounding nanocomposite materials by twin screw extrusion that use supercritical CO2 as a processing aid to produce more highly exfoliated polyolefin-layered silicate nanocomposites than conventional melt intercalation. These methods varied the manner in which the plasticizing behavior of CO2 influences the surfactant of an organoclay, the compatibilizer, and the matrix during preparation of a polyolefin nanocomposite. The results have shown that targeting CO2 to the organoclay-compatibilizer interface can improve the extent of intercalation. However, reduced performance was observed when CO2 was introduced predominantly to the matrix or neat organoclay. In general, the different techniques of addition for CO2 did bring about greater structural changes to the organoclay, but the stiffness of the resulting materials was lower than simply following a conventional melt intercalation approach. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers

[1]  Hanxiong Huang,et al.  Microstructure and mechanical properties of polypropylene/poly (ethylene-co-octene copolymer)/clay ternary nanocomposites prepared by melt blending using supercritical carbon dioxide as a processing aid , 2011 .

[2]  M. Balogh,et al.  Influence of supercritical CO2 on the interactions between maleated polypropylene and alkyl‐ammonium organoclay , 2011 .

[3]  R. Kannan,et al.  Investigation of clay modifier effects on the structure and rheology of supercritical carbon dioxide‐processed polymer nanocomposites , 2010 .

[4]  S. Bourbigot,et al.  Supercritical CO2 as an efficient medium for layered silicate organomodification: preparation of thermally stable organoclays and dispersion in polyamide 6 , 2009 .

[5]  M. Balogh,et al.  In situ x-ray diffraction studies of alkyl quaternary ammonium montmorillonite in a CO(2) environment. , 2009, The Journal of chemical physics.

[6]  I. Chung,et al.  The effect of organic modifiers with different chain lengths on the dispersion of clay layers in HTPB (hydroxyl terminated polybutadiene) , 2008 .

[7]  M. Thompson,et al.  Interaction of supercritical CO2 with alkyl-ammonium organoclays: changes in morphology. , 2008, Journal of colloid and interface science.

[8]  Do Hoon Kim,et al.  Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part II: Thermal expansion behavior , 2008 .

[9]  P. Dubois,et al.  Study of interlayer spacing collapse during polymer/clay nanocomposite melt intercalation. , 2008, Journal of nanoscience and nanotechnology.

[10]  Jae Wook Lee,et al.  Development of polypropylene-clay nanocomposite with supercritical $CO_2$ assisted twin screw extrusion , 2008 .

[11]  D. Baird,et al.  An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide , 2007 .

[12]  Shaoyun Guo,et al.  Effects of ultrasonic oscillations on structure and properties of HDPE/montmorillonite nanocomposites , 2007 .

[13]  Do Hoon Kim,et al.  Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I: Morphology and mechanical properties , 2007 .

[14]  J. Oberhauser,et al.  Processing of polypropylene–clay nanocomposites: Single‐screw extrusion with in‐line supercritical carbon dioxide feed versus twin‐screw extrusion , 2007 .

[15]  R. Vaia,et al.  Self-Assembly of Alkylammonium Chains on Montmorillonite: Effect of Chain Length, Head Group Structure, and Cation Exchange Capacity , 2007 .

[16]  R. Frost,et al.  Modification of the surfaces of Wyoming montmorillonite by the cationic surfactants alkyl trimethyl, dialkyl dimethyl, and trialkyl methyl ammonium bromides. , 2007, Journal of colloid and interface science.

[17]  Esin Gulari,et al.  Supercritical CO2 dispersion of nano-clays and clay/polymer nanocomposites , 2006 .

[18]  M. Thompson,et al.  Recyclability of a layered silicate–thermoplastic olefin elastomer nanocomposite , 2006 .

[19]  K. Ahn,et al.  A novel fabrication method for poly(propylene)/clay nanocomposites by continuous processing , 2006 .

[20]  K. Ahn,et al.  Time–electric field superposition in electrically activated polypropylene/layered silicate nanocomposites , 2006 .

[21]  R. K. Shah,et al.  Organoclay degradation in melt processed polyethylene nanocomposites , 2006 .

[22]  R. Ozisik,et al.  Effects of processing parameters on the preparation of nylon 6 nanocomposites , 2006 .

[23]  Y. Wang,et al.  Clay dispersion and physical properties of melt-blended PP/organoclay nanocomposites: effect of interfacial interaction , 2006 .

[24]  G. Lu,et al.  The interlayer swelling and molecular packing in organoclays. , 2005, Journal of colloid and interface science.

[25]  James L White,et al.  Formation of polymer nanocomposites with various organoclays , 2005 .

[26]  J. K. Mishra,et al.  Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer , 2005 .

[27]  D. Mielewski,et al.  Exfoliation and dispersion enhancement in polypropylene nanocomposites by in‐situ melt phase ultrasonication , 2004 .

[28]  A. Lesser,et al.  CO2-assisted polymer processing: A new alternative for intractable polymers , 2004 .

[29]  M. Balogh,et al.  Assessing organo‐clay dispersion in polymer nanocomposites , 2004 .

[30]  J. Denault,et al.  Polyolefin nanocomposites: Formulation and development , 2004 .

[31]  Donald R Paul,et al.  Nylon-6 Nanocomposites from Alkylammonium-Modified Clay: The Role of Alkyl Tails on Exfoliation , 2004 .

[32]  Maurizio Fermeglia,et al.  Computer simulation of polypropylene/organoclay nanocomposites: characterization of atomic scale structure and prediction of binding energy , 2004 .

[33]  K. Seefeldt,et al.  Rheology of Polypropylene/Clay Hybrid Materials , 2001 .