Construction and testing of a dish/Stirling solar energy unit

AbstractThis study is concerned with the construction of a simple solar energy conversion system consisting of a parabolic dish concentrator and a Stirling engine. For this purpose, a parabolic dish concentrator consisting of planar mirror segments was built and coupled with a Stirling engine recently developed by the authors for solar energy conversion and domestic cogeneration. By mounting the engine to the bottom of the dish concentrator, the solar rays were directly reflected onto the hot end of the displacer cylinder. For the design of an appropriate parabolic dish concentrator reflecting solar rays onto the hot zone of a displacer cylinder and satisfying their uniform distribution, an equation was derived. The energy conversion unit constructed was tested under 820 W m−2 solar radiation. The engine started to run at 93°C hot end temperature. At steady running conditions, the hot end temperature of the displacer cylinder became stable at ∼156°C. The variation of shaft power with engine speed and char...

[1]  R. J. Jenkins,et al.  Absorptance, emittance, and thermal efficiencies of surfaces for solar spacecraft power , 1964 .

[2]  J. M. Bowyer,et al.  Comparison of advanced engines for parabolic dish solar thermal power plants , 1982 .

[3]  Jeffrey G. Schreiber,et al.  Status of the advanced Stirling conversion system project for 25 kW dish Stirling applications , 1991 .

[4]  Richard B. Diver,et al.  Design, Fabrication, and Testing of a 30 kWt Screen-Wick Heat-Pipe Solar Receiver , 1992 .

[5]  R. B. Diver,et al.  The CPG 5-kWe Dish-Stirling Development Program , 1992 .

[6]  K. Scott Rawlinson,et al.  Design, fabrication and testing of a 15-kW gas-fired liquid-metal evaporator , 1992 .

[7]  R B Diver.  Mirror alignment techniques for point-focus solar concentrators , 1992 .

[8]  N. D. Kaushika,et al.  Performance of a low cost solar paraboloidal dish steam generating system , 2000 .

[9]  Theocharis Tsoutsos,et al.  Technical and economical evaluation of solar thermal power generation , 2003 .

[10]  Somchai Wongwises,et al.  A review of solar-powered Stirling engines and low temperature differential Stirling engines , 2003 .

[11]  Can Çinar,et al.  Nodal analysis of a Stirling engine with concentric piston and displacer , 2006 .

[12]  Somchai Wongwises,et al.  A four power-piston low-temperature differential Stirling engine using simulated solar energy as a heat source , 2008 .

[13]  Alain Ferriere,et al.  Thermal model of a dish/Stirling systems , 2009 .

[14]  Fatih Aksoy,et al.  An experimental study on the development of a β-type Stirling engine for low and moderate temperature heat sources , 2009 .

[15]  Fatih Aksoy,et al.  Thermodynamic analysis of a β type Stirling engine with a displacer driving mechanism by means of a lever , 2009 .