Velocity field for polymer melts extrusion using particle image velocimetry: Stable and unstable flow regimes

Abstract Extrusion defects and flow instabilities are an important limitation in most polymer processing operations. Observation of the fluid kinematics to deduce the dynamical response of the polymer can be very useful to characterise these instabilities and understand the mechanisms involved in their triggering and enhancement. To do so, the flow of two linear polydimethylsiloxanes (PDMS) through an axisymmetric sudden contraction has been studied using pressure drop measurements as well as particles image velocimetry (PIV). This optical method for measuring flow velocities provides quantitative whole-field information even when flow conditions are non-stationary. It was shown that, for the two polymer melts studied, the flow is symmetric under stable conditions whereas non-symmetric and non-stationary flows are obtained under unstable conditions. These instabilities arise in the upstream part of the contraction. The extruded rod is then excited by these instabilities which generates the phenomenon of melt fracture at the die exit. In addition, the flow is found to be purely elongationnal on the axis during stable and unstable flow regimes. Under the experimental conditions investigated here, the resulting stretch rate on the centreline varies as x−3, x being the distance above the contraction plane. Moreover flow through contractions becomes unstable first around the centreline and close to the orifice plane. The instabilities then develop in the radial direction and invade progressively the entire upstream flow which completely looses its properties of symmetry: the flow is expected to have a spiralling motion and its two-dimensional (2D) projection looks like a knitting system. The frequency of the instabilities remains approximately the same while their amplitude increases with flow regimes. On the flow axis, instantaneous fluctuations of the velocity can reach ±30% of a mean value characteristic of a mean flow. These fluctuations are more important on each side of the axis where they can reach ±105% of a mean value.

[1]  D. Baird,et al.  THE INFLUENCE OF POROUS MEDIA ON THE FLOW OF POLYMER MELTS IN CAPILLARIES , 1983 .

[2]  J. Piau,et al.  Influence of upstream instabilities and wall slip on melt fracture and sharkskin phenomena during silicones extrusion through orifice dies , 1990 .

[3]  R. Armstrong,et al.  Nonlinear dynamics of viscoelastic flow in axisymmetric abrupt contractions , 1991, Journal of Fluid Mechanics.

[4]  Morton M. Denn,et al.  EXTRUSION INSTABILITIES AND WALL SLIP , 2003 .

[5]  D. Binding.  Further considerations of axisymmetric contraction flows , 1991 .

[6]  M. Denn.  ISSUES IN VISCOELASTIC FLUID MECHANICS , 1990 .

[7]  K. Walters,et al.  Viscoelastic contraction flows: comparison of axisymmetric and planar configurations , 2002 .

[8]  J. Piau,et al.  Distortions of polymer melt extrudates and their elimination using slippery surfaces , 1995 .

[9]  D. V. Boger,et al.  The kinematics and stability of die entry flows , 1979 .

[10]  Michael Schmidt,et al.  Influence of molecular structure on secondary flow of polyolefin melts as investigated by laser-Doppler velocimetry , 2001 .

[11]  J. Piau,et al.  Creeping flow regimes of low concentration polymer solutions in thick solvents through an orifice die , 1992 .

[12]  B. Tremblay.  Estimation of the elongational viscosity of polyethylene blends at high deformation rates , 1989 .

[13]  S. Muller,et al.  Laser doppler velocimetry measurements of velocity fields and transitions in viscoelastic fluids , 1986 .

[14]  J. Piau,et al.  Low Reynolds number flow visualization of linear and branched silicones upstream of orifice dies , 1988 .

[15]  J. Piau,et al.  Shear rheometry of polydimethylsiloxanes. Master curves and testing of Gleissle and Yamamoto relations , 1993 .

[16]  M. Schmidt,et al.  Entry flow of a low-density-polyethylene melt into a slit die: An experimental study by laser-Doppler velocimetry , 1999 .

[17]  Gareth H. McKinley,et al.  The axisymmetric contraction-expansion: the role of extensional rheology on vortex growth dynamics and the enhanced pressure drop , 2001 .

[18]  J. Rothstein,et al.  Extensional flow of a polystyrene Boger fluid through a 4 : 1 : 4 axisymmetric contraction/expansion , 1999 .

[19]  E. B. Bagley.  The Separation of Elastic and Viscous Effects in Polymer Flow , 1961 .

[20]  R. Larson.  Instabilities in viscoelastic flows , 1992 .

[21]  I. Moore,et al.  Experimental velocity distribution measurements of high density polyethylene flowing into and within a slit , 1986 .

[22]  J. Piau,et al.  Effect of die entrance filtering on mitigation of upstream instability during extrusion of polymer melts , 2000 .

[23]  I. B. Kazatchkov,et al.  The effect of boron nitride on the rheology and processing of polyolefins , 2000 .

[24]  G. Vinogradov,et al.  Rheology of polymers , 1980 .

[25]  J. Piau,et al.  Sharkskin and cracking of polymer melt extrudates , 1997 .

[26]  M. Mackley,et al.  Experimental centreline planar extension of polyethylene melt flowing into a slit die , 1995 .

[27]  J. Piau,et al.  Spatially resolved stress birefringence and flow visualization in the flow instabilities of a polydimethylsiloxane extruded through a slit die , 1998 .

[28]  K. Chiba,et al.  Instabilities in a circular entry flow of dilute polymer solutions , 1997 .

[29]  James L White,et al.  The development of the velocity field in polymer melts in a reservoir approaching a capillary die , 1971 .