Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood

[1]  V. Nasir,et al.  A review on wood machining: characterization, optimization, and monitoring of the sawing process , 2020 .

[2]  Farrokh Sassani,et al.  Acoustic emission monitoring of sawing process: artificial intelligence approach for optimal sensory feature selection , 2019, The International Journal of Advanced Manufacturing Technology.

[3]  John White,et al.  Development of a monitoring system for guided circular saws: an experimental investigation , 2019 .

[4]  Vahid Nasir,et al.  The effect of rotation speed on the power consumption and cutting accuracy of guided circular saw: Experimental measurement and analysis of saw critical and flutter speeds , 2018, Wood Material Science & Engineering.

[5]  K. Orłowski,et al.  Fracture toughness and shear yield strength determination for two selected species of central European provenance , 2018, BioResources.

[6]  R. Hernández,et al.  Effects of cutterhead diameter and log infeed position on surface quality of black spruce cants produced by a chipper-canter. , 2017 .

[7]  Ahmed Koubaa,et al.  Effects of commercial thinning, log position in the stem, and cutting width on the surface quality of cants produced by a chipper-canter , 2018 .

[8]  R. Kminiak,et al.  Cutting Power during Cross-Cutting of Selected Wood Species with a Circular Saw , 2016 .

[9]  Jakub Sandak,et al.  Proposal of a new method for the rapid assessment of wood machinability and cutting tool performance in peripheral milling , 2016, European Journal of Wood and Wood Products.

[10]  Asghar Tarmian,et al.  Measurement of Wood Cutting Forces during Bandsawing Using Piezoelectric Dynamometer , 2016 .

[11]  C. Aguilar,et al.  Advances on indirect methods to evaluate tool wear for Radiata pine solid wood molding , 2016 .

[12]  R. Kminiak,et al.  The Dependence of Surface Quality on Tool Wear of Circular Saw Blades during Transversal Sawing of Beech Wood , 2015 .

[13]  Murat Kılıç,et al.  Effects of Machining Methods on the Surface Roughness Values of Pinus nigra Arnold Wood , 2015 .

[14]  R. Kminiak,et al.  Roughness of Surface Created by Transversal Sawing of Spruce, Beech, and Oak Wood , 2015 .

[15]  Milan Gaff,et al.  Effect of Number of Saw Blade Teeth on Noise Level and Wear of Blade Edges during Cutting of Wood , 2015 .

[16]  Ján Kováč,et al.  Wood Crosscutting Process Analysis for Circular Saws , 2014 .

[17]  Tomasz Ochrymiuk,et al.  Application of fracture mechanics for energetic effects predictions while wood sawing , 2013, Wood Science and Technology.

[18]  Angela M. Llavé,et al.  Effects of cutting parameters on cutting forces and surface quality of black spruce cants , 2013, European Journal of Wood and Wood Products.

[19]  Mats Ekevad,et al.  Main cutting force models for two species of tropical wood , 2012 .

[20]  Kazimierz Orłowski,et al.  On some approaches to cutting power estimation while wood sawing , 2012 .

[21]  Philip Hackney,et al.  Machining of wood using a Rip Tooth: effects of work-piece variations on cutting mechanics , 2011 .

[22]  M Grzeskiewicz,et al.  Effect of thermal modification of oak wood on sawdust granularity. , 2010 .

[23]  Alfredo Aguilera,et al.  Cutting energy and surface roughness in medium density fiberboard rip sawing , 2011, European Journal of Wood and Wood Products.

[24]  A. Phinyomark,et al.  An optimal wavelet function based on wavelet denoising for multifunction myoelectric control , 2009, 2009 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology.

[25]  Ŝ. Barcik,et al.  Experimental cutting on the log band saw , 1996, Holz als Roh- und Werkstoff.

[26]  J. Sandak,et al.  Sawing frozen wood with narrow kerf saws: energy and quality effects. , 2009 .

[27]  S. G. Hutton,et al.  Effect of tooth front bevel angle on cutting accuracy and chip formation for cicular rip saws , 1992, Holz als Roh- und Werkstoff.

[28]  K. Orłowski.  Experimental studies on specific cutting resistance while cutting with narrow-kerf saws. , 2007 .

[29]  B. O. M. Axelsson,et al.  Studies of the main cutting force at and near a cutting edge , 2007, Holz als Roh- und Werkstoff.

[30]  Chiaki Tanaka,et al.  The critical rotational speed of circular saw: simple measurement method and its practical implementations , 2007, Journal of Wood Science.

[31]  A. Očkajová,et al.  Smanjenje emisije drvne prašine tijekom piljenja drva univerzalnom kružnom pilom , 2006 .

[32]  A. Očkajová,et al.  Reduction of dustiness in sawing wood by universal circular saw , 2006 .

[33]  Robert W. Meyer,et al.  Cutting forces for tension and normal wood of maple , 2006 .

[34]  Florent Eyma,et al.  Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values , 2005 .

[35]  J. Bergström,et al.  Wear testing of saw teeth in timber cutting , 2001 .

[36]  I. Johnstone,et al.  Adapting to Unknown Smoothness via Wavelet Shrinkage , 1995 .

[37]  Peter Koch,et al.  Wood Machining Processes , 1964 .

[38]  W. M. McKenzie,et al.  Fundamental aspects of the woodcutting process. , 1960 .

[39]  Norman Charles Franz,et al.  An Analysis of the Wood-Cutting Process , 1958 .

[40]  E. Kivimaa,et al.  Cutting force in woodworking. , 1950 .