Identify and classify vibration fault based on artificial intelligence techniques

Steam turbines (ST) need to be protected from damaging faults in the event it ends up in a danger zone. Some examples of faults include vibration, thrust, and eccentricity. Vibration fault represents one of the challenges to designers, as it could cause massive damages and its fault signal is rather complex. Researches in the field intend to prevent or diagnose vibration faults early in order to reduce the cost of maintenance and improve the reliability of machine production. This work aims to diagnose and classify vibration faults by utilized many schemes of Artificial Intelligence (AI) technique and signal processing, such as Fuzzy logic-Sugeno FIS (FLS), Back Propagation Neural Network (BPNN) hybrid with FL-Sugeno (NFS), and BPNN hybrid with FL-Mamdani FIS (NFM). The signal of the fault and the design of the FL and NN were done using MATLB. The results will be compared based on its ability to feed the output signal to the control system without disturbing system behavior. The results showed that the NFS scheme is able to generate linear and stable signals that could be fed to modify the main demand of the ST protection system. This work concluded that the hybrid of more than one AI technique will improve the reliability of protection system and generate smooth signals that are proportional to the fault level, which can then be used to control the speed and generated power in order to prevent the increase of vibration faults.

[1]  Mahmoud ElHefnawi,et al.  Recurrent Neural Networks and Soft Computing , 2012 .

[2]  Huang Wentao,et al.  Fault diagnosis for steam turbine based on flow graphs and naïve Bayesian classifier , 2014, 2014 IEEE International Conference on Mechatronics and Automation.

[3]  Marie-Véronique Le Lann,et al.  Situation prediction based on fuzzy clustering for industrial complex processes , 2014, Inf. Sci..

[4]  V. Sugumaran,et al.  Rough set based rule learning and fuzzy classification of wavelet features for fault diagnosis of monoblock centrifugal pump , 2013 .

[5]  Chao-Ming Huang,et al.  Fault Diagnosis of Steam Turbine-Generator Sets Using an EPSO-Based Support Vector Classifier , 2013, IEEE Transactions on Energy Conversion.

[6]  Noura Mansouri,et al.  T-S fuzzy control of uncertain chaotic vibration , 2012 .

[7]  Fernando A. C. Gomide,et al.  Evolving Hybrid Neural Fuzzy Network for System Modeling and Time Series Forecasting , 2013, 2013 12th International Conference on Machine Learning and Applications.

[8]  Yanpeng Cai,et al.  A hybrid life-cycle and fuzzy-set-pair analyses approach for comprehensively evaluating impacts of industrial wastewater under uncertainty , 2014 .

[9]  Zulkifli Mohd Nopiah,et al.  Vehicle interior noise and vibration level assessment through the data clustering and hybrid classification model , 2015 .

[10]  Constantinos Sourkounis,et al.  Torque control methods for active damping of vibrations in drive systems of wind turbines , 2014, 2014 Ninth International Conference on Ecological Vehicles and Renewable Energies (EVER).

[11]  Bogdan Wilamowski,et al.  Replacing fuzzy systems with neural networks , 2010, 3rd International Conference on Human System Interaction.

[12]  Nagarajan Murali,et al.  Early Classification of Bearing Faults Using Morphological Operators and Fuzzy Inference , 2013, IEEE Transactions on Industrial Electronics.

[13]  G. Marichal,et al.  An intelligent system for faulty-bearing detection based on vibration spectra , 2011 .

[14]  P. S. Londhe,et al.  Design of Single-Input Fuzzy Logic Controller for Spatial Control of Advanced Heavy Water Reactor , 2014, IEEE Transactions on Nuclear Science.

[15]  Nong Zhang,et al.  Direct voltage control of magnetorheological damper for vehicle suspensions , 2013 .

[16]  Ian Howard,et al.  A vibration cavitation sensitivity parameter based on spectral and statistical methods , 2015, Expert Syst. Appl..

[17]  Zhou Yanbing,et al.  Fault recognition of large steam turbine based on higher order spectral features of vibration signals , 2011, 2011 IEEE International Conference on Mechatronics and Automation.

[18]  Aminudin Abu,et al.  Wireless fault tolerances decision using artificial intelligence technique , 2016 .

[19]  Hong-guang Li,et al.  A PLMF-Based Decomposition–Coordination Algorithm for Fuzzy Linear Programming in Industrial Applications , 2014 .

[20]  Cheng-Wu Chen,et al.  RETRACTED: Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review , 2012 .

[21]  Seung-Bok Choi,et al.  Hybrid clustering based fuzzy structure for vibration control - Part 1: A novel algorithm for building neuro-fuzzy system , 2015 .

[22]  Hai-Jun Rong Indirect Adaptive Fuzzy-Neural Control of Robot Manipulator , 2012, 2012 IEEE 14th International Conference on High Performance Computing and Communication & 2012 IEEE 9th International Conference on Embedded Software and Systems.

[23]  Moneer Ali Lilo,et al.  Vibration fault detection and classifaction based on the fft and fuzzy logic , 2016 .

[24]  Wei Gao,et al.  Vibration Fault Diagnosis of Steam Turbine Shafting Based on Probability Neural Networks , 2008, 2008 Congress on Image and Signal Processing.

[25]  Nelson F. F. Ebecken,et al.  Parameter Identification of Recurrent Fuzzy Systems With Fuzzy Finite-State Automata Representation , 2008, IEEE Transactions on Fuzzy Systems.

[26]  Zhang Hao,et al.  Fault diagnosis in power plant based on multi-neural network , 2014, 2014 IEEE International Conference on System Science and Engineering (ICSSE).

[27]  Soheil Mehralian,et al.  Comparison between Artificial Neural Network and neuro-fuzzy for gold price prediction , 2013, 2013 13th Iranian Conference on Fuzzy Systems (IFSC).

[28]  Hare Krishna Mohanta,et al.  Soft sensing of particle size in a grinding process: Application of support vector regression, fuzzy inference and adaptive neuro fuzzy inference techniques for online monitoring of cement fineness , 2014 .

[29]  Eduardo J. Dozal-Mejorada,et al.  Predictive control with adaptive model maintenance: Application to power plants , 2014, Comput. Chem. Eng..

[30]  L. A. Latiff,et al.  Gas Turbine bearing and vibration classification of using multi-layer Neural Network , 2015, 2015 International Conference on Smart Sensors and Application (ICSSA).

[31]  Ian Howard,et al.  Modification of the ISO-10816 centrifugal pump vibration severity charts for use with Octave band spectral measurements , 2012 .

[32]  Ian Howard,et al.  A review of major centrifugal pump failure modes with application to the water supply and sewerage industries , 2011 .

[33]  Han Xiao,et al.  Identification of vibration–speed curve for hydroelectric generator unit using statistical fuzzy vector chain code and support vector machine , 2014 .