Effect of preheating on welding cold crack sensitivity of China low activation martensitic steel

[1]  P. Titus,et al.  Conceptual design of the water cooled ceramic breeder blanket for CFETR based on pressurized water cooled reactor technology , 2017 .

[2]  Qunying Huang,et al.  Status and improvement of CLAM for nuclear application , 2017 .

[3]  M. Rieth,et al.  Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service , 2016 .

[4]  V. Badheka,et al.  Improved Penetration with the Use of Oxide Fluxes in Activated TIG Welding of Low Activation Ferritic/Martensitic Steel , 2016, Transactions of the Indian Institute of Metals.

[5]  Jianzhong Zhou,et al.  Effects of LSP on micro-structures and residual stresses in a 4 mm CLAM steel weld joints , 2015 .

[6]  Qunying Huang.  Development status of CLAM steel for fusion application , 2014 .

[7]  A. K. Bhaduri,et al.  Delta ferrite in the weld metal of reduced activation ferritic martensitic steel , 2014 .

[8]  Shaojun Liu,et al.  Fabrication Technique Development of Dual Functional Lithium Lead Test Blanket Module , 2014 .

[9]  Shaojun Liu,et al.  Effect of post-weld heat treatment on the mechanical properties of electron beam welded joints for CLAM steel , 2013 .

[10]  X. Chen,et al.  Effect of thermal cycle on microstructure and mechanical properties of CLAM steel weld CGHAZ , 2013 .

[11]  Jianzhong Zhou,et al.  An overview of the welding technologies of CLAM steels for fusion application , 2012 .

[12]  M. D. Mathew,et al.  Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic–martensitic steel , 2012 .

[13]  Qunying Huang,et al.  Influence of different cooling rates on the microstructure of the HAZ and welding CCT diagram of CLAM steel , 2011 .

[14]  Yican Wu,et al.  Progress in development of CLAM steel and fabrication of small TBM in China , 2011 .

[15]  M. Rieth,et al.  Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO , 2011 .

[16]  Yong Liu.  Overview of Fusion Nuclear Technology Activities at SWIP , 2010 .

[17]  Shaojun Liu,et al.  Progress in development of fabrication of small TBMs for EAST and ITER , 2010 .

[18]  Yves Poitevin,et al.  Manufacturing of a HCLL cooling plate mock up , 2008 .

[19]  Yican Wu,et al.  Conceptual design and testing strategy of a dual functional lithium–lead test blanket module in ITER and EAST , 2007 .

[20]  Yican Wu,et al.  Design status and development strategy of China liquid lithium-lead blankets and related material technology , 2007 .

[21]  E. Diegele,et al.  The manufacturing technologies of the European breeding blankets , 2004 .

[22]  Qunying Huang,et al.  Study of irradiation effects in China low activation martensitic steel CLAM , 2004 .

[23]  V. Badheka,et al.  Experimental investigation on microstructure and mechanical properties of activated TIG welded reduced activation ferritic/martensitic steel joints , 2017 .

[24]  Jianzhong Zhou,et al.  Measurement and analysis of SHCCT diagram for CLAM steel , 2013 .