Thermochemical Stability of Yb2Si2O7 Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C
暂无分享,去创建一个
[1] W. Wang,et al. Suppressing the phase-transition-induced cracking of SiO2 TGOs by lattice solid solution , 2023, Journal of the European Ceramic Society.
[2] Jinping Du,et al. Failure mechanism of ytterbium silicate/silicon bi-layer environmental barrier coatings on SiCf/SiC composites upon long-time water vapor and oxygen corrosion test , 2022, Surface and Coatings Technology.
[3] Guanjun Yang,et al. Improving the oxidation resistance of Si coatings by isolated-particle healing , 2022, Corrosion Communications.
[4] Lai-fei Cheng,et al. Long-term ceramic matrix composite for aeroengine , 2022, Journal of Advanced Ceramics.
[5] Yanfei Wang,et al. The excellent protection effects of silicon/ytterbium silicate bi‐layer environmental barrier coatings on SiC f /SiC composites , 2022, International Journal of Applied Ceramic Technology.
[6] C. Moreau,et al. As-Sprayed Highly Crystalline Yb_2Si_2O_7 Environmental Barrier Coatings (EBCs) by Atmospheric Plasma Spray (APS) , 2022, Journal of Thermal Spray Technology.
[7] R. Vaßen,et al. Oxidation Kinetics of Atmospheric Plasma Sprayed Environmental Barrier Coatings , 2022, Journal of the European Ceramic Society.
[8] K. Zhou,et al. High-temperature performances of Si-HfO2-based environmental barrier coatings via atmospheric plasma spraying , 2022, Ceramics International.
[9] Jiemin Wang,et al. Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites , 2022, Journal of Advanced Ceramics.
[10] Shihong Zhang,et al. Research status of bond coats in environmental barrier coatings , 2022, International Journal of Applied Ceramic Technology.
[11] Zhao Xue,et al. Effect of the HfO2/SiO2 pre-mixing ratio and heating temperature on the formation of HfSiO4 as a bond coat of environmental barrier coatings , 2022, Ceramics International.
[12] Dianying Chen. Suspension HVOF Sprayed Ytterbium Disilicate Environmental Barrier Coatings , 2022, Journal of Thermal Spray Technology.
[13] P. Xiao,et al. Study of sintering behavior of ytterbium disilicate and ytterbium monosilicate for environmental barrier coating applications , 2022, Ceramics International.
[14] Hongbo Guo,et al. High-temperature interface stability of tri-layer thermal environmental barrier coatings , 2021, Ceramics International.
[15] Xiangrong Lu,et al. Oxidation resistance of SiCf/SiC composites with three-layer environmental barrier coatings up to 1360 °C in air atmosphere , 2021, Ceramics International.
[16] M. Lance,et al. Accelerated oxidation during 1350°C cycling of ytterbium silicate environmental barrier coatings , 2021, Journal of the American Ceramic Society.
[17] S. Sampath,et al. Evaluating steam oxidation kinetics of environmental barrier coatings , 2021 .
[18] R. McMeeking,et al. Recession of BN coatings in SiC/SiC composites through reaction with water vapor , 2021, Journal of the American Ceramic Society.
[19] G. Dwivedi,et al. Thermal Cycling Behavior of Air Plasma-Sprayed and Low-Pressure Plasma-Sprayed Environmental Barrier Coatings , 2021, Coatings.
[20] K. Unocic,et al. Steam oxidation of ytterbium disilicate environmental barrier coatings with and without a silicon bond coat , 2021 .
[21] G. Dwivedi,et al. In-flight particle states and coating properties of air plasma sprayed ytterbium disilicates , 2021, Surface and Coatings Technology.
[22] H. Bale,et al. Crystallization behavior of air-plasma-sprayed ytterbium-silicate-based environmental barrier coatings , 2021, Journal of the European Ceramic Society.
[23] E. Opila,et al. Thermochemical stability of Y 2 Si 2 O 7 in high‐temperature water vapor , 2020 .
[24] W. Xu,et al. High-entropy (Y0.2Nd0.2Sm0.2Eu0.2Er0.2)AlO3: A promising thermal/environmental barrier material for oxide/oxide composites , 2020 .
[25] E. Opila,et al. Thermochemical stability and microstructural evolution of Yb2Si2O7 in high-velocity high-temperature water vapor , 2020 .
[26] Guo Liu,et al. Interface evolution of Si/Mullite/Yb2SiO5 PS-PVD environmental barrier coatings under high temperature , 2020 .
[27] R. Vaßen,et al. High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body , 2020 .
[28] F. Zok,et al. Degradation of a SiC‐SiC composite in water vapor environments , 2020, Journal of the American Ceramic Society.
[29] M. Engstler,et al. Hafnia-doped silicon bond coats manufactured by PVD for SiC/SiC CMCs , 2020, Acta Materialia.
[30] R. M. Sullivan. Reformulation of oxide growth equations for oxidation of silicon bond coat in environmental barrier coating systems , 2019, Journal of the European Ceramic Society.
[31] Yanchun Zhou,et al. (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4: A high-entropy rare-earth phosphate monazite ceramic with low thermal conductivity and good compatibility with Al2O3 , 2019 .
[32] Dianying Chen,et al. Environmental barrier coatings using low pressure plasma spray process , 2019, Journal of the American Ceramic Society.
[33] H. Lee,et al. Phase and microstructure evolution in plasma sprayed Yb2Si2O7 coatings , 2019, Journal of the European Ceramic Society.
[34] R. Vaßen,et al. Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings , 2019, Journal of the European Ceramic Society.
[35] N. Padture. Environmental degradation of high-temperature protective coatings for ceramic-matrix composites in gas-turbine engines , 2019, npj Materials Degradation.
[36] Frank W. Zok,et al. X-ray computed tomography of microstructure evolution during matrix impregnation and curing in unidirectional fiber beds , 2019, Composites Part A: Applied Science and Manufacturing.
[37] Kang N. Lee. Yb2 Si2 O7 Environmental barrier coatings with reduced bond coat oxidation rates via chemical modifications for long life , 2018, Journal of the American Ceramic Society.
[38] C. Przybyla,et al. Modeling environmentally induced property degradation of SiC/BN/SiC ceramic matrix composites , 2018 .
[39] Y. Arai,et al. Effect of cristobalite formation on the delamination resistance of an oxide/Si/(SiC/SiC) environmental barrier coating system after cyclic high temperature thermal exposure , 2017 .
[40] R. Vaßen,et al. Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study , 2017, Journal of Thermal Spray Technology.
[41] Chang-jiu Li,et al. A comprehensive sintering mechanism for TBCs‐Part I: An overall evolution with two‐stage kinetics , 2017 .
[42] F. Giuliani,et al. High‐temperature fracture toughness of mullite with monoclinic zirconia , 2017 .
[43] Chang-jiu Li,et al. Edge Effect on Crack Patterns in Thermally Sprayed Ceramic Splats , 2017, Journal of Thermal Spray Technology.
[44] Nitin P. Padture,et al. Advanced structural ceramics in aerospace propulsion. , 2016, Nature materials.
[45] H. Wadley,et al. Response of ytterbium disilicate–silicon environmental barrier coatings to thermal cycling in water vapor , 2016 .
[46] H. Wadley,et al. Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure , 2016 .
[47] H. Wadley,et al. Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings , 2015, Journal of Materials Science.
[48] Jiemin Wang,et al. Damage Tolerance and Extensive Plastic Deformation of β‐Yb2Si2O7 from Room to High Temperatures , 2015 .
[49] H. Wadley,et al. Mechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor , 2015 .
[50] T. Ohji,et al. Corrosion and recession mechanism of Lu2Si2O7/mullite eutectic , 2008 .
[51] T. Ohji,et al. Development of Oxide-Based EBC for Silicon Nitride , 2005 .
[52] R. M. Sullivan. On the oxidation of the silicon bond coat in environmental barrier coatings , 2021 .
[53] T. Ohji,et al. Recession Behavior of Yb2Si2O7 Phase Under High Speed Steam Jet at High Temperatures , 2008 .
[54] T. Ohji,et al. Corrosion and recession of mullite in water vapor environment , 2008 .