Real-time monitoring of container stability loss using wireless vibration sensor tags

Container packages experience diverse forms of mechanical excitations during their transportation and handling. Some of these excitations can damage the goods and make them reach their final destination with defects. Early detection of damages to container packages during their transport on a container truck can allow the truck driver to take the necessary steps to avert larger damages and thus cause significant cost savings. Sensor based approaches are being investigated to provide this early detection capability. This paper presents an approach that uses wireless vibration sensors based on Zigbee protocol to monitor the integrity and safety of packages during transportation. T-mote Sky wireless nodes integrated with two 2-axis MEMS accelerometers were used to monitor the integrity of the packages. Experiments were conducted to discern the vibration patterns resulting from some common modes of mechanical stability losses, such as wobbling, tilting, colliding and sliding. The experiments used a 1:32 scaled version of RC truck and a proportionately sized container. The vibration patterns under multiple stability loss modes were captured. It was observed that each type of stability loss can be clearly classified based on the patterns in the vibration data collected. Extraneous signal components were suppressed using a wavelet analysis, and fidelity of the signals capturing the pattern associated with the stability loss events was enhanced. Thus, each stability loss is associated with a specific set of abnormal (out-of-control) behavioral patterns exhibited by the processes vibration signals. An interrogation and detection procedure was developed based on this wavelet analysis to detect in realtime the stability loss as well as the times and identities of the specific modes of stability loss that occurred during the span of time over which the measured data is collected. The results show that the multi-scale monitoring facilitated by the wavelet analysis of signals from the wireless vibration sensor tags can be useful for accurate detection of stability loss events.

[1]  James Demmel,et al.  Wireless sensor networks for structural health monitoring , 2006, SenSys '06.

[2]  Vidya Krishnamurthy.  Wireless sensor network for structural health monitoring , 2008 .

[3]  Kazuo Nakazawa,et al.  Development of damage detection system for container , 1995, Proceedings of IECON '95 - 21st Annual Conference on IEEE Industrial Electronics.

[4]  Jan D. Gehrke,et al.  The Intelligent Container - Toward Autonomous Logistic Processes , 2006 .

[5]  Deborah Estrin,et al.  An evaluation of multi-resolution search and storage in resource-constrained sensor networks - eScholarship , 2003 .

[6]  Walter Lang,et al.  Spatial temperature profiling by semi-passive RFID loggers for perishable food transportation , 2009 .

[7]  Vincent Rouillard.  Remote monitoring of vehicle shock and vibrations , 2002 .

[8]  R. Bozzo,et al.  MOCONT: a new system for container terminal monitoring and control , 2001, ITSC 2001. 2001 IEEE Intelligent Transportation Systems. Proceedings (Cat. No.01TH8585).

[9]  K. Vursavuş,et al.  Determining the Effects of Vibration Parameters and Packaging Method on Mechanical Damage in Golden Delicious Apples , 2004 .

[10]  Walter Lang,et al.  Applying autonomous sensor systems in logistics—Combining sensor networks, RFIDs and software agents , 2006 .

[11]  Satish T. S. Bukkapatnam,et al.  Container Integrity and Condition Monitoring using RF Vibration Sensor Tags , 2007, 2007 IEEE International Conference on Automation Science and Engineering.

[12]  Deborah Estrin,et al.  Scalable Multi-Resolution Storage and Search in Sensor Networks , 2003 .

[13]  Vincent Rouillard,et al.  A novel approach to analysing and simulating railcar shock and vibrations , 2007 .

[14]  John Anderson,et al.  Wireless sensor networks for habitat monitoring , 2002, WSNA '02.

[15]  Charles Birdsong.  An Integrated Measurement to Road Vibration Simulation System , 2001 .

[16]  Deborah Estrin,et al.  An implementation of multi-resolution search and storage in resource-constrained sensor networks , 2003 .

[17]  Deborah Estrin,et al.  A wireless sensor network For structural monitoring , 2004, SenSys '04.

[18]  M J Vickerman.  NEXT-GENERATION CONTAINER VESSELS: IMPACTS ON TRANSPORTATION INFRASTRUCTURE AND OPERATIONS , 1998 .

[19]  Gary Burgess,et al.  A comparison of leaf‐spring with aircushion trailer suspensions in the transport environment , 1992 .

[20]  Deborah Estrin,et al.  An evaluation of multi-resolution storage for sensor networks , 2003, SenSys '03.

[21]  Walter Lang,et al.  Semi-passive RFID and beyond: steps towards automated quality tracing in the food chain , 2007, Int. J. Radio Freq. Identif. Technol. Appl..

[22]  Vincent Rouillard,et al.  Classification of road surface profiles , 2000 .

[23]  Ming Xu,et al.  Bruising of apples in four different packages using simulated truck vibration , 1992 .

[24]  Jeongyeup Paek,et al.  A wireless sensor network for structural health monitoring: performance and experience , 2005, The Second IEEE Workshop on Embedded Networked Sensors, 2005. EmNetS-II..