Influence of the Approach Direction on the Repeatability of an Industrial Robot

[1]  Ilian A. Bonev,et al.  Accuracy enhancement of industrial robots by on-line pose correction , 2017, 2017 2nd Asia-Pacific Conference on Intelligent Robot Systems (ACIRS).

[2]  Róbert Huňady,et al.  Vibration and modal analysis of a rotating disc using high-speed 3D digital image correlation , 2019, Mechanical Systems and Signal Processing.

[3]  Ilian A. Bonev,et al.  A comparative evaluation of three industrial robots using three reference measuring techniques , 2015, Ind. Robot.

[4]  Ilian A. Bonev,et al.  Absolute calibration of an ABB IRB 1600 robot using a laser tracker , 2013 .

[5]  Dariusz Mika,et al.  INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511 , 2016 .

[6]  Wenlei Xiao,et al.  System identification of the nonlinear residual errors of an industrial robot using massive measurements , 2019, Robotics Comput. Integr. Manuf..

[7]  David A. Ehrhardt,et al.  High-speed 3D digital image correlation vibration measurement: Recent advancements and noted limitations , 2017 .

[8]  Karl Kleinmann,et al.  Predictive robotic contour following using laser-camera-triangulation , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[9]  Mohsen Moradi Dalvand,et al.  Laser interferometry-based guidance methodology for high precision positioning of mechanisms and robots , 2010 .

[10]  José Mauricio S. T. Motta,et al.  Robot calibration using a 3D vision-based measurement system with a single camera , 2001 .

[11]  Stéphane Caro,et al.  Geometric calibration of industrial robots using enhanced partial pose measurements and design of experiments , 2015 .

[12]  Ilian A. Bonev,et al.  Comparison of two calibration methods for a small industrial robot based on an optical CMM and a laser tracker , 2013, Robotica.

[13]  Ping Zhang,et al.  Online robot calibration based on vision measurement , 2013 .

[14]  John E. Mottershead,et al.  Finite element model updating from full-field vibration measurement using digital image correlation , 2011 .

[15]  Ivan Kuric,et al.  Measurement of industrial robot pose repeatability , 2018 .

[16]  Robert G. Landers,et al.  Iterative learning control of single point incremental sheet forming process using digital image correlation , 2019 .

[17]  Bijan Shirinzadeh,et al.  A systematic technique to estimate positioning errors for robot accuracy improvement using laser interferometry based sensing , 2005 .

[18]  Daniel P. Rohe,et al.  Comparison of DIC and LDV for practical vibration and modal measurements , 2017 .

[19]  Hans Christian Schmidt,et al.  Enhanced Absolute Accuracy of an Industrial Milling Robot Using Stereo Camera System , 2016 .

[20]  Ilian A. Bonev,et al.  Robot calibration using a portable photogrammetry system , 2018 .

[21]  Ilian A. Bonev,et al.  Local and closed-loop calibration of an industrial serial robot using a new low-cost 3D measuring device , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[22]  Benjamin Keinert,et al.  Spherical fibonacci mapping , 2015, ACM Trans. Graph..

[23]  J. Hothmer.  Book reviewInternational archives of photogrammetry and remote sensing: ISPRS, Editor S. Murai: volume 27 part A, Tokyo-Japan-Japan 1989 , 1989 .

[24]  Martin Hagara,et al.  A new procedure of modal parameter estimation for high-speed digital image correlation , 2017 .

[25]  Ilian A. Bonev,et al.  Absolute robot calibration with a single telescoping ballbar , 2014 .

[26]  High-speed Digital Image Correlation as a Tool for 3D Motion Analysis of Mechanical Systems , 2015 .

[27]  Marek Płaczek,et al.  Testing of an industrial robot’s accuracy and repeatability in off and online environment , 2018, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

[28]  Zhang Lin,et al.  The problem in Accuracy Compensation of Industrial Robot , 2017, ICRA 2017.

[29]  Ilian A. Bonev,et al.  Assessment of the positioning performance of an industrial robot , 2012, Ind. Robot.