A new rock-engineering index to assess jointed rock mass groutability

This paper aims at presenting a rock mass groutability index (RGI) based on the rock engineering systems (RES). After defining the rock grouting mechanism and identifying the main effective factors, an interaction matrix is introduced to study the groutability of rock masses. As the interaction matrix codes are not unique numbers, interactive intensities are calculated for interaction matrix and a group decision-making method, fuzzy Delphi analytic hierarchy process, has been used to determine the total weights of interactive factors, which is the crucial stage in the RES technique. To rate effective parameters on rock grouting, the result of numerical simulation together with experimental and analytical studies are used as in literature. As a result, an index, RGI is presented to predict the groutability potential of rock masses. Seven geological units of Sarvak formation in Bakhtiary dam are used as a case study to rate them by using this index. For the purpose of evaluation, cross-correlations between the Rock Quality Designation (RQD) and Lugeon values with RGI were done and it was observed that with increasing RQD values, the RGI increases and with increasing Lugeon values, the RGI decreases linearly with good correlation coefficients.

[1]  Gudmundur S. Bodvarsson,et al.  Hydraulic conductivity of rock fractures , 1996 .

[2]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .

[3]  G. Gustafson,et al.  The use of transmissivity data from the probe holes for predicting tunnel grouting , 2000 .

[4]  Håkan Stille,et al.  COMPUTER-SIMULATED FLOW OF GROUTS IN JOINTED ROCK , 1992 .

[5]  Håkan Stille,et al.  A Method for Measuring and Evaluating the Penetrability of Grouts , 2003 .

[6]  Ya Ching Liu,et al.  A new approach for application of rock mass classification on rock slope stability assessment , 2007 .

[7]  J. B. Walsh,et al.  EFFECT OF PORE PRESSURE AND CONFINING PRESSURE ON FRACTURE PERMEABILITY , 1981 .

[8]  Vamegh Rasouli,et al.  A fracture sliding potential index for wellbore stability analysis , 2010 .

[9]  Lei Zhang,et al.  An application of the rock engineering systems (RES) methodology in rockfall hazard assessment on the Chengdu-Lhasa Highway, China , 2004 .

[10]  Friedrich-Karl Ewert.  Rock Grouting: With Emphasis on Dam Sites , 1985 .

[11]  M. Bohanec,et al.  The Analytic Hierarchy Process , 2004 .

[12]  Ken Weaver,et al.  Dam Foundation Grouting , 1991 .

[13]  John A. Hudson,et al.  ROCK ENGINEERING SYSTEMS. THEORY AND PRACTICE , 1992 .

[14]  Bernard Amadei,et al.  An analytical solution for transient flow of Bingham viscoplastic materials in rock fractures , 2001 .

[15]  David J. Sanderson,et al.  EVALUATION OF THE 2-D PERMEABILITY TENSOR FOR FRACTURED ROCK MASSES , 1996 .

[16]  James Warner,et al.  Practical Handbook of Grouting: Soil, Rock, and Structures , 2004 .

[17]  W. L. Wilkinson,et al.  Non-Newtonian Fluids : Fluid Mechanics, Mixing and Heat Transfer , 1960 .

[18]  R. KhaloKakaie,et al.  Ranking the rock slope instability potential using the Interaction Matrix (IM) technique; a case study in Iran , 2012, Arabian Journal of Geosciences.

[19]  Åsa Fransson,et al.  Grouting predictions based on hydraulic tests of short duration : analytical, numerical and experimental approaches , 1999 .

[20]  Mijia Yang,et al.  Prediction of grout penetration in fractured rocks by numerical simulation , 2002 .

[21]  H. Stille,et al.  Application of New Theories and Technology for Grouting of Dams and Foundations on Rock , 2012, Geotechnical and Geological Engineering.

[22]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[23]  Donald A. Bruce.  Glossary of Grouting Terminology , 2005 .

[24]  M. E. Tani.  Grouting Rock Fractures with Cement Grout , 2012 .

[25]  Håkan Stille,et al.  Simulation Of Grouting In Jointed Rock , 1987 .

[26]  Gunnar Gustafson,et al.  Prediction of groutability from grout properties and hydrogeological data , 1996 .

[27]  John A. Hudson,et al.  A comprehensive method of rock mass characterization for indicating natural slope instability , 1996, Quarterly Journal of Engineering Geology.

[28]  Madan M. Gupta,et al.  Fuzzy mathematical models in engineering and management science , 1988 .

[29]  Gunnar Gustafson,et al.  Stop Criteria for Cement Grouting , 2005 .

[30]  John A. Hudson,et al.  The fully-coupled model for rock engineering systems , 1995 .

[31]  D. Rozos,et al.  An implementation of rock engineering system for ranking the instability potential of natural slopes in Greek territory. An application in Karditsa County , 2008 .

[32]  A. C. Houlsby.  Construction and design of cement grouting , 1990 .