The Micro-Pillar Shear-Stress Sensor MPS3 for Turbulent Flow

Wall-shear stress results from the relative motion of a fluid over a body surface as a consequence of the no-slip condition of the fluid in the vicinity of the wall. To determine the two-dimensional wall-shear stress distribution is of utter importance in theoretical and applied turbulence research. In this article, characteristics of the Micro-Pillar Shear-Stress Sensor MPS3, which has been shown to offer the potential to measure the two-directional dynamic wall-shear stress distribution in turbulent flows, will be summarized. After a brief general description of the sensor concept, material characteristics, possible sensor-structure related error sources, various sensitivity and distinct sensor performance aspects will be addressed. Especially, pressure-sensitivity related aspects will be discussed. This discussion will serve as ‘design rules’ for possible new fields of applications of the sensor technology.

[1]  P. Saffman The lift on a small sphere in a slow shear flow , 1965, Journal of Fluid Mechanics.

[2]  J. Lumley,et al.  A First Course in Turbulence , 1972 .

[3]  P. Alfredsson,et al.  Effects of imperfect spatial resolution on measurements of wall-bounded turbulentbx shear flows , 1983, Journal of Fluid Mechanics.

[4]  B. Khoo,et al.  Effects of imperfect spatial resolution on turbulence measurements in the very near-wall viscous sublayer region , 1997 .

[5]  W. Schröder,et al.  Feasability study of wall shear stress imaging using microstructured surfaces with flexible micropillars , 2005 .

[6]  F. Bretherton Slow viscous motion round a cylinder in a simple shear , 1962, Journal of Fluid Mechanics.

[7]  Holger Foysi,et al.  Compressibility effects and turbulence scalings in supersonic channel flow , 2004, Journal of Fluid Mechanics.

[8]  Parviz Moin,et al.  On the space‐time characteristics of wall‐pressure fluctuations , 1990 .

[9]  Wolfgang Schröder,et al.  Dynamic calibration technique for the micro-pillar shear-stress sensor MPS3 , 2008 .

[10]  Wolfgang Schröder,et al.  Two-Dimensional Visualization of Turbulent Wall Shear Stress Using Micropillars , 2009 .

[11]  W. Schröder,et al.  Mean wall-shear stress measurements using the micro-pillar shear-stress sensor MPS3 , 2007 .

[12]  Chiang Juay Teo,et al.  Dynamic response of a hot-wire anemometer. Part I: A marginally elevated hot-wire probe for near-wall velocity measurements , 1998 .

[13]  Ivan Marusic,et al.  Evidence of very long meandering features in the logarithmic region of turbulent boundary layers , 2007, Journal of Fluid Mechanics.

[14]  P. S. Klebanoff,et al.  Probability distributions and correlations in a turbulent boundary layer , 1973 .

[15]  V Casey,et al.  Elastomer rubbers as deflection elements in pressure sensors: investigation of properties using a custom designed programmable elastomer test rig , 2003 .

[16]  Jonathan Morrison,et al.  Anisotropy and energy flux in wall turbulence , 2003, Journal of Fluid Mechanics.

[17]  Mark Sheplak,et al.  Dynamic calibration technique for thermal shear-stress sensors with mean flow , 2005 .

[18]  H. H. Fernholz,et al.  New developments and applications of skin-friction measuring techniques , 1996 .

[19]  P. Bergveld,et al.  Polydimethylsiloxane, a photocurable rubberelastic polymer used as spring material in micromechanical sensors , 1997 .

[20]  V. Casey,et al.  Elastomer microspring arrays for biomedical sensors fabricated using micromachined silicon molds , 2003 .

[21]  Dominique Legendre,et al.  The lift force on a spherical bubble in a viscous linear shear flow , 1998, Journal of Fluid Mechanics.

[22]  John Kim,et al.  On the structure of pressure fluctuations in simulated turbulent channel flow , 1989, Journal of Fluid Mechanics.

[23]  Wolfgang Schröder,et al.  Dynamic wall-shear stress measurements in turbulent pipe flow using the micro-pillar sensor MPS3 , 2008 .

[24]  Helmut Eckelmann,et al.  Behavior of the three fluctuating velocity components in the wall region of a turbulent channel flow , 1979 .

[25]  B. Khoo,et al.  A time-resolved hot-wire shear stress probe for turbulent flow: use of laminar flow calibration , 1994 .

[26]  H. Dwyer,et al.  A sphere in shear flow at finite Reynolds number: effect of shear on particle lift, drag, and heat transfer , 1990, Journal of Fluid Mechanics.

[27]  F. White Viscous Fluid Flow , 1974 .

[28]  P. Veltink,et al.  The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications , 1997 .

[29]  Ernst Obermeier,et al.  A micro surface fence probe for the application in flow reversal areas , 2002 .

[30]  Chang Liu,et al.  Re-configurable fluid circuits by PDMS elastomer micromachining , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[31]  Chiang Juay Teo,et al.  Dynamic response of a hot-wire anemometer. Part II: A flush-mounted hot-wire and hot-film probes for wall shear stress measurements , 1998 .

[32]  John L. Lumley,et al.  Viscous Sublayer and Adjacent Wall Region in Turbulent Pipe Flow , 1967 .

[33]  T. R. Auton,et al.  The lift force on a spherical body in a rotational flow , 1987, Journal of Fluid Mechanics.

[34]  H. Eckelmann,et al.  The fluctuating wall‐shear stress and the velocity field in the viscous sublayer , 1988 .

[35]  Helmut Eckelmann,et al.  The structure of the viscous sublayer and the adjacent wall region in a turbulent channel flow , 1974, Journal of Fluid Mechanics.

[36]  P. Moin,et al.  Turbulence statistics in fully developed channel flow at low Reynolds number , 1987, Journal of Fluid Mechanics.

[37]  Joost Conrad Lötters,et al.  Polydimethylsiloxane as an elastic material applied in a capacitive accelerometer , 1996 .

[38]  Markus Raffel,et al.  Particle Image Velocimetry: A Practical Guide , 2002 .

[39]  Christian J. Kähler,et al.  Wall-shear-stress and near-wall turbulence measurements up to single pixel resolution by means of long-distance micro-PIV , 2006 .

[40]  Mark Sheplak,et al.  Dynamic calibration of a shear-stress sensor using Stokes-layer excitation , 2001 .

[41]  Wolfgang Schröder,et al.  Nano-newton drag sensor based on flexible micro-pillars , 2006 .

[42]  Leonard Bairstow,et al.  The Resistance of a Cylinder Moving in a Viscous Fluid , 1923 .

[43]  Aravind Padmanabhan,et al.  Silicon micromachined sensors and sensor arrays for shear-stress measurements in aerodynamic flows , 1996 .