Mixed-Mode BIST Using Embedded Processors

In complex systems, embedded processors may be used to run software routines for test pattern generation and response evaluation. For system components which are not completely random pattern testable, the test programs have to generate deterministic patterns after random testing. Usually the random test part of the program requires long run times whereas the part for deterministic testing has high memory requirements.In this paper it is shown that an appropriate selection of the random pattern test method can significantly reduce the memory requirements of the deterministic part. A new, highly efficient scheme for software-based random pattern testing is proposed, and it is shown how to extend the scheme for deterministic test pattern generation. The entire test scheme may also be used for implementing a scan based BIST in hardware.

[1]  Christian Dufaza,et al.  BIST hardware generator for mixed test scheme , 1995, Proceedings the European Design and Test Conference. ED&TC 1995.

[2]  Constantin Halatsis,et al.  Accumulator-based BIST approach for stuck-open and delay fault testing , 1995, Proceedings the European Design and Test Conference. ED&TC 1995.

[3]  Jacob Savir,et al.  Built In Test for VLSI: Pseudorandom Techniques , 1987 .

[4]  Sheldon B. Akers,et al.  Test set embedding in a built-in self-test environment , 1989, Proceedings. 'Meeting the Tests of Time'., International Test Conference.

[5]  Hans-Joachim Wunderlich.  Multiple distributions for biased random test patterns , 1990, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[6]  Bernard Courtois,et al.  Built-In Test for Circuits with Scan Based on Reseeding of Multiple-Polynomial Linear Feedback Shift Registers , 1995, IEEE Trans. Computers.

[7]  S. Hellebrand,et al.  Pattern generation for a deterministic BIST scheme , 1995, Proceedings of IEEE International Conference on Computer Aided Design (ICCAD).

[8]  Bernard Courtois,et al.  Generation of Vector Patterns Through Reseeding of Multipe-Polynominal Linear Feedback Shift Registers , 1992 .

[9]  Hans-Joachim Wunderlich,et al.  Mixed-Mode BIST Using Embedded Processors , 1996, Proceedings International Test Conference 1996. Test and Design Validity.

[10]  Edward J. McCluskey,et al.  Circuits for Pseudo-Exhaustive Test Pattern Generation. , 1986 .

[11]  B. Koenemann,et al.  Built-in logic block observation techniques , 1979 .

[12]  Eric Lindbloom,et al.  Random-Pattern Coverage Enhancement and Diagnosis for LSSD Logic Self-Test , 1983, IBM J. Res. Dev..

[13]  Clay S. Gloster,et al.  Hardware-based weighted random pattern generation for boundary scan , 1989, Proceedings. 'Meeting the Tests of Time'., International Test Conference.

[14]  Edward J. McCluskey,et al.  Circuits for pseudoexhaustive test pattern generation , 1986, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[15]  Janusz Rajski,et al.  Decompression of test data using variable-length seed LFSRs , 1995, Proceedings 13th IEEE VLSI Test Symposium.

[16]  Janusz Rajski,et al.  Test Pattern Generation Based On Arithmetic Operations , 1994, IEEE/ACM International Conference on Computer-Aided Design.

[17]  B. Koneman,et al.  LFSR-Coded Test Patterns for Scan Designs , 1993 .

[18]  Gert-Jan Tromp,et al.  Minimal Test Sets for Combinatorial Circuits , 1991 .

[19]  Albrecht P. Stroele,et al.  A self-test approach using accumulators as test pattern generators , 1995, Proceedings of ISCAS'95 - International Symposium on Circuits and Systems.

[20]  Howard C. Card,et al.  Cellular automata-based pseudorandom number generators for built-in self-test , 1989, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[21]  Hans-Joachim Wunderlich,et al.  Self test using unequiprobable random patterns , 1987 .

[22]  Gert-Jan Tromp,et al.  Minimal Test Sets for Combinational Circuits , 1991, 1991, Proceedings. International Test Conference.

[23]  David Bryan,et al.  Combinational profiles of sequential benchmark circuits , 1989, IEEE International Symposium on Circuits and Systems,.

[24]  Irith Pomeranz,et al.  Cost-Effective Generation of Minimal Test Sets for Stuck-at Faults in Combinational Logic Circuits , 1993, 30th ACM/IEEE Design Automation Conference.

[25]  Hiroyuki Higuchi,et al.  Compaction of Test Sets for Combinatinal Circuits Based on Symbolic Fault Simulation (Special Issue on Synthesis and Verification of Hardware Design) , 1993 .

[26]  Irith Pomeranz,et al.  ROTCO: a reverse order test compaction technique , 1992, Proceedings Euro ASIC '92.

[27]  J. Savir,et al.  A multiple seed linear feedback shift register , 1990, Proceedings. International Test Conference 1990.

[28]  Arnold L. Rosenberg,et al.  Exhaustive Generation of Bit Patterns with Applications to VLSI Self-Testing , 1983, IEEE Transactions on Computers.

[29]  Nilanjan Mukherjee,et al.  Arithmetic built-in self test for high-level synthesis , 1995, Proceedings 13th IEEE VLSI Test Symposium.

[30]  Solomon W. Golomb,et al.  Shift Register Sequences , 1981 .

[31]  Nur A. Touba,et al.  Synthesis of mapping logic for generating transformed pseudo-random patterns for BIST , 1995, Proceedings of 1995 IEEE International Test Conference (ITC).