Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg

[1]  N. Welham.  Formation of Nanometric TiB2 from TiO2 , 2004 .

[2]  J. Zaykoski,et al.  Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: Theoretical considerations and historical experience , 2004 .

[3]  L. Sneddon,et al.  Precursor routes to Group 4 metal borides, and metal boride/carbide and metal boride/nitride composites , 2004 .

[4]  K. W. Dudeck,et al.  Polymeric precursors to refractory metal borides , 2004 .

[5]  R. Ricceri,et al.  A fast and low-cost room temperature process for TiB2 formation by mechanosynthesis , 2004 .

[6]  S. Das,et al.  Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process , 2003 .

[7]  Hongliang Lu,et al.  Characteristic of mechanically milled TiO2 powders , 2002 .

[8]  D. Radev,et al.  Mechanochemical Synthesis and SHS of Diborides of Titanium and Zirconium , 2001 .

[9]  S. Bégin-Colin,et al.  Initial stages of the transformation of single-crystal anatase particles during high-energy ball milling , 2001 .

[10]  Zhenguo Yang,et al.  Polymorphic transformation and powder characteristics of TiO2 during high energy milling , 2000 .

[11]  N. Welham,et al.  Ambient‐Temperature Mechanochemical Formation of Titanium Nitride‐Alumina Composites from TiO2 and FeTiO3 , 1999 .

[12]  P. Willis,et al.  Low temperature mechanochemical formation of titanium carbonitride , 1999 .

[13]  S. Bégin-Colin,et al.  Kinetics of formation of nanocrystalline TiO2 II by high energy ball-milling of anatase TiO2 , 1999 .

[14]  N. Welham.  Mechanical activation of the solid-state reaction between Al and TiO2 , 1998 .

[15]  N. Welham,et al.  Ambient temperature formation of an alumina-titanium carbide-metal ceramic , 1998 .

[16]  E. Levashov,et al.  The Structure and Properties of Ti–B–N, Ti–Si–B–N, Ti–Si–C–N, and Ti–Al–C–N Coatings Deposited by Magnetron Sputtering Using Composite Targets Produced by Self-Propagating High-Temperature Synthesis (SHS) , 1998 .

[17]  Tim Holland,et al.  Unit cell refinement from powder diffraction data: the use of regression diagnostics , 1997, Mineralogical Magazine.

[18]  G. Nolze,et al.  POWDER CELL– a program for the representation and manipulation of crystal structures and calculation of the resulting X‐ray powder patterns , 1996 .

[19]  A. Merzhanov,et al.  Combustion processes that synthesize materials , 1996 .

[20]  S. Bégin-Colin,et al.  Polymorphic transformations of titania induced by ball milling , 1994 .

[21]  P. Ownby,et al.  Enhanced Mechanical Properties of Alumina by Dispersed Titanium Diboride Particulate Inclusions , 1991 .

[22]  P. Schwarzkopf,et al.  Refractory hard metals : borides, carbides, nitrides, and silicides , 1953 .

[23]  R. Kessling.  The binary system zirconiumboron. , 1949, Acta chemica Scandinavica.