Experimental validation of a hybrid Wireless Power Transfer - Power Line Communication system

In this paper the authors perform measurements and simulations of a coupled Wireless Power Transfer and Power Line Communications system: a two coils resonator system is built according to the authors' previous work and the first experimental results are here presented. The system demonstrates its potential and could be used in applications where both wireless power and data transfer are needed, such as vehicles battery charging.

[1]  U. Madawala,et al.  A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems , 2011, IEEE Transactions on Industrial Electronics.

[2]  Marco Raugi,et al.  Power line communication integrated in a Wireless Power Transfer system: A feasibility study , 2014, 18th IEEE International Symposium on Power Line Communications and Its Applications.

[3]  Alanson P. Sample,et al.  Analysis , Experimental Results , and Range Adaptation of Magnetically Coupled Resonators for Wireless Power Transfer , 2010 .

[4]  M. Soljačić,et al.  Wireless Power Transfer via Strongly Coupled Magnetic Resonances , 2007, Science.

[5]  Klaus Dostert,et al.  Cell-wise monitoring of Lithium-ion batteries for automotive traction applications by using power line communication: battery modeling and channel characterization , 2014, 18th IEEE International Symposium on Power Line Communications and Its Applications.

[6]  M. W. Juzkow,et al.  Design considerations for lithium-ion cells. II. Safety and abuse testing , 1997, The Twelfth Annual Battery Conference on Applications and Advances.

[7]  F. Baronti,et al.  Battery Management System: An Overview of Its Application in the Smart Grid and Electric Vehicles , 2013, IEEE Industrial Electronics Magazine.

[8]  Mauro Mongiardo,et al.  Rigorous Network and Full-Wave Electromagnetic Modeling of Wireless Power Transfer Links , 2015, IEEE Transactions on Microwave Theory and Techniques.

[9]  R. D. Lorenz,et al.  Development and Validation of Model for 95%-Efficiency 220-W Wireless Power Transfer Over a 30-cm Air Gap , 2011, IEEE Transactions on Industry Applications.

[10]  Florian Mauser,et al.  Trends in vehicle concept and key technology development for hybrid and battery electric vehicles , 2013, 2013 World Electric Vehicle Symposium and Exhibition (EVS27).

[11]  Takehiro Imura,et al.  Basic experimental study on helical antennas of wireless power transfer for Electric Vehicles by using magnetic resonant couplings , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[12]  Wenxing Zhong,et al.  A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer , 2014, IEEE Transactions on Power Electronics.

[13]  J. McDowall,et al.  Industrial lithium ion battery safety - What are the tradeoffs? , 2007, INTELEC 07 - 29th International Telecommunications Energy Conference.

[14]  Jenshan Lin,et al.  Design and Test of a High-Power High-Efficiency Loosely Coupled Planar Wireless Power Transfer System , 2009, IEEE Transactions on Industrial Electronics.

[15]  W. F. Bentley,et al.  Cell balancing considerations for lithium-ion battery systems , 1997, The Twelfth Annual Battery Conference on Applications and Advances.

[16]  Sungwoo Lee,et al.  High performance inductive power transfer system with narrow rail width for On-Line Electric Vehicles , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[17]  Naoki Inagaki,et al.  Theory of Image Impedance Matching for Inductively Coupled Power Transfer Systems , 2014, IEEE Transactions on Microwave Theory and Techniques.

[18]  Mauro Tucci,et al.  Optimization of a magnetically coupled resonators system for Power Line Communication integration , 2015, 2015 IEEE Wireless Power Transfer Conference (WPTC).