Producción de tableros de partículas con Bolaina (Guazuma crinita Mart) procedente de una plantación de cuatro años
暂无分享,去创建一个
Production of particle boards with Bolaina (Guazuma crinita Mart) from a four-year-old plantation. Three-ply particle boards, 12 mm thick and 0,65 g.cm-3 of density, were made using wood (Guazuma crinita Mart), "bolaina", from a fouryear plantation located in Neshuya Ucayali. The particles were glued with a formaldehyde urea. The physical and mechanical properties of the boards were evaluated according to the methodology proposed by the European Standards for each test. The values of the specific mass and pH of the wood are suitable for the manufacture of particle boards, swelling without paraffin at 2 and 24 hours of immersion in water was 26,45% and 36,40% respectively with paraffin at 2 hours the swelling decreased by 5.29% however at 24 hours of immersion in water the swelling increased by 1.88%. The mean static bending without paraffin was 15.55 MPa, a value close to that found with paraffin. The internal bond without paraffin was 0.97 MPa with a decrease of 15.46% when using paraffin. The evaluation of the results obtained shows that it is possible to manufacture particle boards use with 4-yearold bolaina.
[1] Andrea E. Ramos-Huapaya,et al. SELECCIÓN DE ÁRBOLES DE BOLAINA BLANCA (Guazuma crinita Mart.) COMO CANDIDATOS A ÁRBOLES “PLUS” PARA ENSAYOS DE REJUVENECIMIENTO Y BROTACIÓN , 2016 .
[2] José Guilherme Prata,et al. Evaluation of fast growing alternatives species to three-layer particleboard manufacture. , 2011 .
[3] J. Cornelius,et al. Plantemos madera: Manual sobre el establecimiento, manejo y aprovechamiento de plantaciones maderables para productores de la Amazonía peruana , 2006 .