Effects of the diaphragm at midspan on static and dynamic behaviour of composite railway bridge: A case study

This study focuses on composite multi-girder railway bridges of moderate span for high-speed trains. In this type of bridge the concrete deck is the primary element of transverse rigidity, so the real impact of cross beams is unknown. These cross beams increase the cost of this type of bridge, because they require handling and welding on site. This research studies the impact of a diaphragm in a typical multi-girder railway bridge used in France. The first objective is to develop appropriate modelling techniques that can be used to evaluate the function and effectiveness of a diaphragm in the transverse distribution of traffic loads. The second objective is to know if a diaphragm is really necessary. To answer this question, a three-dimensional model and nonlinear material constitutive equations are considered. Different static loading conditions (self-weight, UIC load, and TGV) are studied and the bridge deck responses to them with and without transverse diaphragm are analyzed. The TGV is modelled with moving loads in order to take into account the dynamic behaviour of the bridge deck. Several critical speeds of train corresponding to natural frequencies are then studied in dynamic analysis. Our static and dynamic analyses concluded that the diaphragm does not seem to be necessary, except for an accidental lateral load. Therefore, it may be possible to not install diaphragms on these bridges.

[1]  Y. Chen.  Prediction of lateral distribution of vehicular live loads on bridges with unequally spaced girders , 1995 .

[2]  Amin Ghali,et al.  Distribution of wheel loads on bridge girders , 1977 .

[3]  Mubiao Su,et al.  THE RESONANT VIBRATION FOR A SIMPLY SUPPORTED GIRDER BRIDGE UNDER HIGH-SPEED TRAINS , 1999 .

[4]  Ton-Lo Wang,et al.  Dynamic response of highway girder bridges , 1996 .

[5]  Ton-Lo Wang,et al.  Vibration of highway steel bridges with longitudinal grades , 1998 .

[6]  Gouri Dhatt,et al.  DYNAMIC BEHAVIOUR OF MULTI-SPAN BEAMS UNDER MOVING LOADS , 1997 .

[7]  Mo Shing Cheung,et al.  Effects of intermediate diaphragms in distributing live loads in beam-and-slab bridges , 1986 .

[8]  Joseph W. Tedesco,et al.  Finite element method analysis of bridge girder-diaphragm interaction , 1995 .

[9]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[10]  L Frýba,et al.  A rough assessment of railway bridges for high speed trains , 2001 .

[11]  Michael F. Petrou,et al.  Effects of superstructure flexibility on strength of reinforced concrete bridge decks , 2004 .

[12]  John W. Fisher,et al.  Distortion-induced fatigue cracking of bridge details with web gaps , 1989 .

[13]  Yeong-Bin Yang,et al.  Impact response of high speed rail bridges and riding comfort of rail cars , 1999 .

[14]  John B. Kennedy,et al.  Evaluation of impact factors for composite concrete–steel cellular straight bridges , 2003 .

[15]  F. Au,et al.  Vibration of multi-span non-uniform bridges under moving vehicles and trains by using modified beam vibration functions , 1999 .

[16]  E. Oñate,et al.  A plastic-damage model for concrete , 1989 .

[17]  Richard Bareš,et al.  Le calcul des grillages de poutres et dalles orthotropes selon la méthode Guyon-Massonnet-Bareš, , 1966 .

[18]  Yeong-Bin Yang,et al.  Vibration of simple beams due to trains moving at high speeds , 1997 .