Dynamic modelling and controlling strategy of polymer electrolyte fuel cells

[1]  D. Rekioua,et al.  Technical feasibility assessment of a PEM fuel cell refrigerator system , 2020 .

[2]  Tong Zhang,et al.  A vehicular proton exchange membrane fuel cell system co-simulation modeling method based on the stack internal distribution parameters monitoring , 2019, Energy Conversion and Management.

[3]  N. Djilali,et al.  Effect of compression on pore size distribution and porosity of PEM fuel cell catalyst layers , 2019, International Journal of Hydrogen Energy.

[4]  D. Depernet,et al.  Interconnection and damping assignment passivity based control for fuel cell and battery vehicle: Simulation and experimentation , 2019, International Journal of Hydrogen Energy.

[5]  Karzan Wakil,et al.  Enhanced control strategies for a hybrid battery/photovoltaic system using FGS-PID in grid-connected mode , 2019, International Journal of Hydrogen Energy.

[6]  M. Machmoum,et al.  An improved thermal control of open cathode proton exchange membrane fuel cell , 2019, International Journal of Hydrogen Energy.

[7]  H. Jasak,et al.  Modeling of droplet detachment using dynamic contact angles in polymer electrolyte fuel cell gas channels , 2019, International Journal of Hydrogen Energy.

[8]  Mayken Espinoza-Andaluz,et al.  A comparative study between D2Q9 and D2Q5 lattice Boltzmann scheme for mass transport phenomena in porous media , 2019, Comput. Math. Appl..

[9]  Shanshan Yang,et al.  An analytical model for the transverse permeability of gas diffusion layer with electrical double layer effects in proton exchange membrane fuel cells , 2018, International Journal of Hydrogen Energy.

[10]  B. Sundén,et al.  Effects of gas diffusion layer deformation on the transport phenomena and performance of PEM fuel cells with interdigitated flow fields , 2018, International Journal of Hydrogen Energy.

[11]  Ahrae Jo,et al.  Numerical study on applicability of metal foam as flow distributor in polymer electrolyte fuel cells (PEFCs) , 2018, International Journal of Hydrogen Energy.

[12]  Yılser Devrim,et al.  Three-dimensional non-isothermal model development of high temperature PEM Fuel Cells , 2018, International Journal of Hydrogen Energy.

[13]  M. Andersson,et al.  Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells , 2018 .

[14]  Subhojit Ghosh,et al.  Fractional order modeling and two loop control of PEM fuel cell for voltage regulation considering both source and load perturbations , 2018 .

[15]  Werner Lehnert,et al.  Interface Resolving Two-phase Flow Simulations in Gas Channels Relevant for Polymer Electrolyte Fuel Cells Using the Volume of Fluid Approach , 2018 .

[16]  Attia A. El-Fergany,et al.  Electrical characterisation of proton exchange membrane fuel cells stack using grasshopper optimiser , 2018 .

[17]  B. Sundén,et al.  Influence of anisotropic gas diffusion layers on transport phenomena in a proton exchange membrane fuel cell , 2017 .

[18]  D. B. Talange,et al.  Modeling and performance evaluation of PEM fuel cell by controlling its input parameters , 2017 .

[19]  Sh. Abdi,et al.  Maximum power point tracking of a proton exchange membrane fuel cell system using PSO-PID controller , 2017 .

[20]  Min Xu,et al.  Thermal stress analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity , 2017 .

[21]  B. Sundén,et al.  Comparing through-plane diffusibility correlations in PEFC gas diffusion layers using the lattice Boltzmann method , 2017 .

[22]  Robert G. Landers,et al.  Active Disturbance Rejection Control for Voltage Stabilization in Open-Cathode Fuel Cells through Temperature Regulation , 2016 .

[23]  Seyed Mehdi Rakhtala,et al.  Fuzzy PID control of a stand-alone system based on PEM fuel cell , 2016 .

[24]  Ya-Xiong Wang,et al.  Feedforward fuzzy-PID control for air flow regulation of PEM fuel cell system , 2015 .

[25]  Hamed Beirami,et al.  Optimal PID plus fuzzy controller design for a PEM fuel cell air feed system using the self-adaptive differential evolution algorithm , 2015 .

[26]  Shan Liang,et al.  Dynamic thermal modeling of PEMFC based on fractional order theory , 2015, The 27th Chinese Control and Decision Conference (2015 CCDC).

[27]  Djamila Rekioua,et al.  Modeling, control and power management of hybrid photovoltaic fuel cells with battery bank supplying electric vehicle , 2014 .

[28]  Djamila Rekioua,et al.  MPPT controller for an interleaved boost dc–dc converter used in fuel cell electric vehicles , 2014 .

[29]  Cédric Damour,et al.  Real-time implementation of a neural model-based self-tuning PID strategy for oxygen stoichiometry control in PEM fuel cell , 2014 .

[30]  Adem Kilicman,et al.  Numerical Solutions of Nonlinear Fractional Partial Differential Equations Arising in Spatial Diffusion of Biological Populations , 2014 .

[31]  S. Kær,et al.  Thermal modeling and temperature control of a PEM fuel cell system for forklift applications , 2014 .

[32]  Suresh G. Advani,et al.  Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications , 2012 .

[33]  P. Ghosh,et al.  Modelling of start-up time for high temperature polymer electrolyte fuel cells , 2011 .

[34]  Mehrdad Saif,et al.  PEM fuel cell low flow FDI , 2011 .

[35]  Fu-Cheng Wang,et al.  Multivariable robust PID control for a PEMFC system , 2010 .

[36]  Amin Hajizadeh,et al.  Control of hybrid fuel cell/energy storage distributed generation system against voltage sag , 2010 .

[37]  Donghoon Shin,et al.  A simple dynamic model for polymer electrolyte membrane fuel cell (PEMFC) power modules: Parameter estimation and model prediction , 2010 .

[38]  Soosan Rowshanzamir,et al.  Modelling and simulation of the steady-state and dynamic behaviour of a PEM fuel cell , 2010 .

[39]  Zhonghua Deng,et al.  Dynamic modeling of electrical characteristics of solid oxide fuel cells using fractional derivatives , 2010 .

[40]  Mustapha Hatti,et al.  Dynamic neural network controller model of PEM fuel cell system , 2009 .

[41]  O. Barbera,et al.  Effect of operative conditions on a PEFC stack performance , 2008 .

[42]  O. Barbera,et al.  Polymer electrolyte fuel cell stack research and development , 2008 .

[43]  Luciane Neves Canha,et al.  An electrochemical-based fuel-cell model suitable for electrical engineering automation approach , 2004, IEEE Transactions on Industrial Electronics.

[44]  Nigel M. Sammes,et al.  System level lumped-parameter dynamic modeling of PEM fuel cell , 2004 .

[45]  Ali Feliachi,et al.  Modeling and simulation of the dynamic behavior of a polymer electrolyte membrane fuel cell , 2003 .

[46]  Craig M. Jensen,et al.  Advanced titanium doping of sodium aluminum hydride:: segue to a practical hydrogen storage material? , 1999 .

[47]  P. R. Pathapati,et al.  A new dynamic model for predicting transient phenomena in a PEM fuel cell system , 2005 .