Gas-tight alumina films on nanoporous substrates through oxidation of sputtered metal films

[1]  Anil V. Virkar,et al.  A High Performance, Anode-Supported Solid Oxide Fuel Cell Operating on Direct Alcohol , 2001 .

[2]  B. Zhu.  Advantages of intermediate temperature solid oxide fuel cells for tractionary applications , 2001 .

[3]  S. Horita,et al.  Improvement of the electrical properties of heteroepitaxial yttria-stabilized zirconia (YSZ) films on Si prepared by reactive sputtering , 2000 .

[4]  B. Steele.  Materials for IT-SOFC stacks: 35 years R&D: the inevitability of gradualness? , 2000 .

[5]  G. Meng,et al.  Preparation of yttria stabilized zirconia membranes on porous substrates by a dip-coating process , 2000 .

[6]  N. Wakiya,et al.  Heteroepitaxial growth of CeO2 thin film on Si(001) with an ultra thin YSZ buffer layer , 2000 .

[7]  Raphaël Ihringer,et al.  Concept and technology of SOFC for electric vehicles , 2000 .

[8]  D. Perednis,et al.  Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .

[9]  S. Menzel,et al.  Al2O3 coatings deposited by filtered vacuum arc : characterization of high temperature properties , 1999 .

[10]  W. Hong,et al.  Sol-gel synthesis of yttria stabilized zirconia membranes through controlled hydrolysis of zirconium alkoxide , 1999 .

[11]  K. Gmucová,et al.  Structural and electrical properties of double-layer ceria/yttria stabilized zirconia deposited on silicon substrate , 1999 .

[12]  J. D. Carter,et al.  Development of Solid‐Oxide Fuel Cells That Operate at 500°C , 1999 .

[13]  Sachiko Ono,et al.  Self‐Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution , 1997 .

[14]  J. P. Hayes,et al.  Reactive sputter deposition of yttria-stabilized zirconia , 1995 .

[15]  Kenji Fukuda,et al.  Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina , 1995, Science.

[16]  S. Barnett,et al.  Sputter-deposited medium-temperature solid oxide fuel cells with multi-layer electrolytes , 1993 .

[17]  D. Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[18]  L. D. Jonghe,et al.  Thin-film ceramic electrolytes deposited on porous and non-porous substrates by sol-gel techniques , 1992 .

[19]  Joop Schoonman,et al.  Electrochemical vapor deposition of stabilized zirconia and interconnection materials for solid oxide fuel cells , 1991 .

[20]  B. Rabin.  Modified Tape Casting Method for Ceramic Joining: Application to Joining of Silicon Carbide , 1990 .

[21]  G. Koren,et al.  Highly oriented as-deposited superconducting laser ablated thin films of Y1Ba2Cu3O7−δ on SrTiO3, zirconia, and Si substrates , 1988 .

[22]  S. J. Wilson,et al.  A kinetic study of the system γ-AlOOHAl2O3 , 1980 .

[23]  F. Lotgering,et al.  Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—I , 1959 .

[24]  T. C. Huang,et al.  Derivation of d-Values from Digitized X-ray and Synchrotron Diffraction Data , 1989 .