Dual Energy Source System (Photovoltaic-Batteries) based on Three-Level Neutral Point Clamping Inverter

This paper deals with a dual energy source system composed of photovoltaic (PV) generator and storage elements (batteries). In this context, power converters are included to ensure the energy flow management and the permanent supply of the load. For this, a boost converter is associated to the PV generator in order to extract the maximum power, and a bidirectional DC-DC converter is connected to the element storage (batteries) to control the Direct Current (DC) bus. To ensure an alternative current supply and improve the power quality, a three-level Neutral Point Clamping (NPC) power inverter is introduced to the proposed energy system. Moreover, an inductance-capacitors (LC) filter is added also to the inverter to eliminate the high frequency harmonics. Intensive simulations are carried-out to demonstrate the effectiveness of the dual energy source system.

[1]  S. C. Kaushik,et al.  Modeling and performance analysis of a concentrated photovoltaic–thermoelectric hybrid power generation system , 2016 .

[2]  Josep M. Guerrero,et al.  A coordinated control of hybrid ac/dc microgrids with PV-wind-battery under variable generation and load conditions , 2019, International Journal of Electrical Power & Energy Systems.

[3]  Michael Hermann,et al.  PVT collector technologies in solar thermal systems: A systematic assessment of electrical and thermal yields with the novel characteristic temperature approach , 2017 .

[4]  Kashem M. Muttaqi,et al.  A review of topologies of three-port DC–DC converters for the integration of renewable energy and energy storage system , 2016 .

[5]  Reza Noroozian,et al.  Simultaneous control and protection schemes for DC multi microgrids systems , 2019 .

[6]  Soteris A. Kalogirou,et al.  Systematic testing of hybrid PV-thermal (PVT) solar collectors in steady-state and dynamic outdoor conditions , 2019, Applied Energy.

[7]  Abdelkader Chaker,et al.  Modeling and Simulation of Photovoltaic Module and Array Based on One and Two Diode Model Using Matlab/Simulink , 2015 .

[8]  T. Ma,et al.  Integrated sizing of hybrid PV-wind-battery system for remote island considering the saturation of each renewable energy resource , 2019, Energy Conversion and Management.

[9]  M. Zaimi,et al.  New analytical approach for modelling effects of temperature and irradiance on physical parameters of photovoltaic solar module , 2018, Energy Conversion and Management.

[10]  Mohamed I. Abu El-Sebah,et al.  Maximum power point tracking for photovoltaic solar pump based on ANFIS tuning system , 2018 .

[11]  Abdelkader Mami,et al.  Bi-objective optimization of a standalone hybrid PV–Wind–battery system generation in a remote area in Tunisia , 2018, Sustainable Energy, Grids and Networks.

[12]  Gang Pei,et al.  Comprehensive photonic approach for diurnal photovoltaic and nocturnal radiative cooling , 2018 .

[13]  I. Dincer,et al.  Investigation of hydrogen production performance of a Photovoltaic and Thermal System , 2017 .