Multifunctional nanoanalytics and long-range scanning probe microscope using a nanopositioning and nanomeasuring machine

An interferometer-based metrological scanning probe microscope (SPM) is successfully integrated into our nanopositioning and nanomeasuring machine (NPM machine) for high-precision measurements with nanometre uncertainty over a range of 25 mm × 25 mm × 5 mm. Both devices were developed at the Institute of Process Measurement and Sensor Technology of Ilmenau University of Technology, Germany. Outstanding results were achieved for different measurement tasks. With the NPM machine, truly long-range and long-term measurements are possible. Due to the tip wear, an automatic SPM cantilever replacement is preferable. Such a tip replacement is also required for the integration of multifunctional nanoanalytics. For example, for Kelvin probe force microscopy (KPFM), the measurement of topography and surface potential with different SPM tips is necessary. For this purpose, an electromagnetic tip changer was designed. The tip changer comprises three SPM probes. In order to retrieve the previous tip positions, additional fiducial marks were developed. The repeatability of relocation is less than 10 nm. The automatic tip changer and fiducial marks are integrated into a sample holder. The tip changer in combination with fiducial marks allows scanning distances three times longer (with the same type of SPM probes) and multifunctional nanoanalytics (with different SPM probes with special properties). Sample KPFM measurements are demonstrated. The developed tip changer, including special fiducial marks, improves the performance and functionality of the NPM machine crucially.

[1]  G. Dai,et al.  Accurate and traceable calibration of two-dimensional gratings , 2007 .

[2]  E. Manske,et al.  Application of the metrological scanning probe microscope for high-precision, long-range, traceable measurements , 2007, SPIE Optical Metrology.

[3]  T. Hausotte,et al.  Novel control scheme for a high-speed metrological scanning probe microscope , 2011 .

[4]  G. B. nsch,et al.  Measurement of the refractive index of air and comparison with modified Edl?n's formulae , 1998 .

[5]  G. Jäger,et al.  Metrological scanning probe microscope , 2006, SPIE Photonics Europe.

[6]  Tino Hausotte,et al.  Interference signal demodulation for nanopositioning and nanomeasuring machines , 2011 .

[7]  T. Hausotte,et al.  Recent developments and challenges of nanopositioning and nanomeasuring technology , 2012 .

[8]  Eberhard Manske,et al.  Navigation in a Large Measurement Volume by Using AFM Technology as a Sensor System in the NPMMNavigation in einem großen Messvolumen in der Nanopositionier- und Mess-Maschine (NPMM) mittels AFM-Technologie , 2009 .

[9]  Yossi Rosenwaks,et al.  Reconstruction of electrostatic force microscopy images , 2005 .

[10]  Paul Girard,et al.  Electrostatic force microscopy: principles and some applications to semiconductors , 2001 .

[11]  Tim Kubertschak,et al.  Kelvin probe force microscopy: measurement data reconstruction , 2009, Scanning Microscopies.

[12]  Enrico Savio,et al.  Thermal drift study on different commercial scanning probe microscopes during the initial warming-up phase , 2011 .

[13]  Ludger Koenders,et al.  Recent developments in dimensional nanometrology using AFMs , 2011 .