Development of a Failure Criterion for Asphalt Mixtures under Different Modes of Fatigue Loading

In the study reported in this paper, the previously developed failure criterion for the viscoelastic continuum damage (VECD) model (referred to here as GOR, where O indicates old and GR is the rate of release of the pseudostrain energy) was applied to different modes of fatigue loading. The research team found that this criterion was mode-of-loading dependent and therefore considered insufficient. To mitigate this limitation, the GOR criterion was refined to become a new failure criterion, the GR method, which resolved the mode-of-load dependency issue. A characteristic relationship, which was found to exist in recycled asphalt pavement (RAP) and non-RAP mixtures between the rate of change of the averaged released pseudostrain energy during fatigue testing and the final fatigue life was derived in this study. This relationship is independent of mode of loading, strain amplitude, and temperature. The proposed failure criterion combines the advantages of the VECD model and this characteristic relationship, which originate from fundamental mixture properties. This proposed method can predict the fatigue life of asphalt concrete mixtures across different modes of loading, temperatures, and strain amplitudes within typical sample-to-sample variability that is observed in fatigue testing.

[1]  Y. Richard Kim,et al.  VISCOELASTIC CONSTITUTIVE MODEL FOR ASPHALT CONCRETE UNDER CYCLIC LOADING , 1998 .

[2]  Robert L. Lytton,et al.  FATIGUE AND HEALING CHARACTERIZATION OF ASPHALT MIXTURES , 2003 .

[3]  Y. Richard Kim,et al.  Fatigue Performance Prediction of North Carolina Mixtures Using the Simplified Viscoelastic Continuum Damage Model , 2010 .

[4]  P Uge,et al.  THE FATIGUE OF BITUMEN AND BITUMINOUS MIXES , 1972 .

[5]  M. Guddati,et al.  Development of a failure criterion for asphalt mixtures under fatigue loading , 2013 .

[6]  Y. Richard Kim,et al.  Characterization and performance prediction of ALF mixtures using a viscoelastoplastic continuum damage model , 2006 .

[7]  Dallas N. Little,et al.  Quantitative Comparison of Energy Methods to Characterize Fatigue in Asphalt Materials , 2009 .

[8]  D. Little,et al.  Characterization of microdamage and healing of asphalt concrete mixtures , 2002 .

[9]  R Reese,et al.  PROPERTIES OF AGED ASPHALT BINDER RELATED TO ASPHALT CONCRETE FATIGUE LIFE , 1997 .

[10]  Samuel H Carpenter,et al.  Energy-Derived, Damage-Based Failure Criterion for Fatigue Testing , 2000 .

[11]  Y. Richard Kim,et al.  Improved calculation method of damage parameter in viscoelastic continuum damage model , 2010 .

[12]  Ghassan R. Chehab,et al.  Characterization of asphalt concrete in uniaxial tension using a viscoelastoplastic continuum damage model , 2003 .

[13]  D. Little,et al.  A unified method for the analysis of controlled-strain and controlled-stress fatigue testing , 2008 .

[14]  W Visser,et al.  ENERGY APPROACH TO FATIGUE FOR PAVEMENT DESIGN , 1977 .

[15]  Richard Schapery Correspondence principles and a generalizedJ integral for large deformation and fracture analysis of viscoelastic media , 1984 .

[16]  Y. Kim,et al.  VISCOELASTIC CONTINUUM DAMAGE MODEL OF ASPHALT CONCRETE WITH HEALING , 1998 .

[17]  Shihui Shen,et al.  Application of the dissipated energy concept in fatigue endurance limit testing , 2005 .

[18]  Cheolmin Baek,et al.  Simplified Viscoelastic Continuum Damage Model as Platform for Asphalt Concrete Fatigue Analysis , 2012 .

[19]  Jo Sias Daniel Development of a simplified fatigue test and analysis procedure using a viscoelastic, continuum damage model and its implementation to WesTrack mixtures , 2001 .

[20]  D. Little,et al.  ONE-DIMENSIONAL CONSTITUTIVE MODELING OF ASPHALT CONCRETE , 1990 .