QC-LDPC codes and their performance on Power Line Communications Channel

In this paper Low Density Parity Check Codes (LDPC) are introduced in the Power Line Communications Channel (PLC). We investigate how different decoding algorithms, which are applied on LDPC codes, affect the system's performance. Therefore, an iterative belief propagation decoding algorithm as well as a proposed variation of the original bit flipping algorithm are exploited. In addition, a hybrid technique combining these two algorithms is proposed. Irregular LDPC codes of various code rates are studied. Specifically, the cases of 1/2, 1/3, 2/3, 3/4 and 4/5 code rates are investigated. Regarding the irregular LDPC codes, they are constructed in a Quasi-Cyclic form. The system's performance is expressed in terms of the resultant Bit Error Rate (BER) versus the Signal to Noise Ratio (SNR). In order to design the power line communications channel, Middleton's class A noise model is used to account for the system's background and impulsive noise, while Zimmermann's channel model is also used. The OFDM transmission technique is taken into account. Results are derived via computer simulations.

[1]  Klaus Dostert,et al.  A multipath model for the powerline channel , 2002, IEEE Trans. Commun..

[2]  H. Meng,et al.  Modeling and analysis of noise effects on broadband power-line communications , 2005, IEEE Transactions on Power Delivery.

[3]  B. Meltzer Hansen,et al.  Characteristics Measurements Using TDR and Modelling of the Transmission Channel , 2007, 2007 IEEE International Symposium on Power Line Communications and Its Applications.

[4]  Kyeongcheol Yang,et al.  Quasi-cyclic LDPC codes for fast encoding , 2005, IEEE Transactions on Information Theory.

[5]  T. Banwell,et al.  A novel approach to the modeling of the indoor power line channel-Part II: transfer function and its properties , 2005, IEEE Transactions on Power Delivery.

[6]  Bahram Honary,et al.  Power line communications: state of the art and future trends , 2003, IEEE Commun. Mag..

[7]  S. Denno,et al.  A decoding for low density parity check codes over impulsive noise channels , 2005, International Symposium on Power Line Communications and Its Applications, 2005..

[8]  H. Philipps.  Modelling of Powerline Communication Channels , 2006 .

[9]  Robert H. Morelos-Zaragoza,et al.  The Art of Error Correcting Coding: Morelos-Zaragoza/The Art of Error Correcting Coding, Second Edition , 2006 .

[10]  Shu Lin,et al.  Low-density parity-check codes based on finite geometries: A rediscovery and new results , 2001, IEEE Trans. Inf. Theory.

[11]  David Middleton,et al.  Statistical-Physical Models of Electromagnetic Interference , 1977, IEEE Transactions on Electromagnetic Compatibility.

[12]  Wayne Wolf,et al.  Implementation-efficient reliability ratio based weighted bit-flipping decoding for LDPC codes , 2005 .

[13]  Robert G. Gallager,et al.  Low-density parity-check codes , 1962, IRE Trans. Inf. Theory.

[14]  E. Gunawan,et al.  Radio-frequency common-mode noise propagation model for power-line cable , 2005, IEEE Transactions on Power Delivery.

[15]  C. Spagnol,et al.  Reduced complexity, FPGA implementation of quasi-cyclic LDPC decoder , 2005, Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005..

[16]  P. Degauque,et al.  Impulsive noise on indoor power lines: characterization and mitigation of its effect on PLC systems , 2003, 2003 IEEE International Symposium on Electromagnetic Compatibility, 2003. EMC '03..

[17]  Yu Kou,et al.  Low Density Parity Check Codes Based on Finite Geometries: A Rediscovery and More , 1999 .

[18]  Lajos Hanzo,et al.  Reliability ratio based weighted bit-flipping decoding for low-density parity-check codes , 2004 .

[19]  Keum-Chan Whang,et al.  Mitigation of Performance Degradation by Impulsive Noise in LDPC Coded OFDM System , 2006, 2006 IEEE International Symposium on Power Line Communications and Its Applications.