3-D anatomically based dynamic modeling of the human knee to include tibio-femoral and patello-femoral joints.

An anatomical dynamic model consisting of three body segments, femur, tibia and patella, has been developed in order to determine the three-dimensional dynamic response of the human knee. Deformable contact was allowed at all articular surfaces, which were mathematically represented using Coons' bicubic surface patches. Nonlinear elastic springs were used to model all ligamentous structures. Two joint coordinate systems were employed to describe the six-degrees-of-freedom tibio-femoral (TF) and patello-femoral (PF) joint motions using twelve kinematic parameters. Two versions of the model were developed to account for wrapping and nonwrapping of the quadriceps tendon around the femur. Model equations consist of twelve nonlinear second-order ordinary differential equations coupled with nonlinear algebraic constraint equations resulting in a Differential-Algebraic Equations (DAE) system that was solved using the Differential/Algebraic System Solver (DASSL) developed at Lawrence Livermore National Laboratory. Model calculations were performed to simulate the knee extension exercise by applying non-linear forcing functions to the quadriceps tendon. Under the conditions tested, both "screw home mechanism" and patellar flexion lagging were predicted. Throughout the entire range of motion, the medial component of the TF contact force was found to be larger than the lateral one while the lateral component of the PF contact force was found to be larger than the medial one. The anterior and posterior fibers of both anterior and posterior cruciate ligaments, ACL and PCL, respectively, had opposite force patterns: the posterior fibers were most taut at full extension while the anterior fibers were most taut near 90 degrees of flexion. The ACL was found to carry a larger total force than the PCL at full extension, while the PCL carried a larger total force than the ACL in the range of 75 degrees to 90 degrees of flexion.

[1]  E S Grood,et al.  Sensitivity of insertion locations on length patterns of anterior cruciate ligament fibers. , 1986, Journal of biomechanical engineering.

[2]  A. Amis,et al.  The mechanical properties of the two bundles of the human posterior cruciate ligament. , 1994, Journal of biomechanics.

[3]  L. Blankevoort,et al.  Validation of a three-dimensional model of the knee. , 1996, Journal of biomechanics.

[4]  H. Grootenboer,et al.  Articular contact in a three-dimensional model of the knee. , 1991, Journal of Biomechanics.

[5]  J B Morrison,et al.  The mechanics of the knee joint in relation to normal walking. , 1970, Journal of biomechanics.

[6]  F. Noyes,et al.  Biomechanics of the knee extension exercise , 1983 .

[7]  Hehne Hj Biomechanics of the patellofemoral joint and its clinical relevance. , 1990, Clinical orthopaedics and related research.

[8]  A. Thambyah,et al.  Biomechanical study on the effect of twisted human patellar tendon. , 2000, Clinical biomechanics.

[9]  E. Hille,et al.  Pressure and contact-surface measurements within the femoropatellar joint and their variations following lateral release , 1985, Archives of orthopaedic and traumatic surgery.

[10]  A E Engin,et al.  Three-body segment dynamic model of the human knee. , 1993, Journal of biomechanical engineering.

[11]  F. Noyes,et al.  Biomechanics of the knee-extension exercise. Effect of cutting the anterior cruciate ligament. , 1984, The Journal of bone and joint surgery. American volume.

[12]  S. Hirokawa,et al.  Three-dimensional mathematical model analysis of the patellofemoral joint. , 1991, Journal of biomechanics.

[13]  J J O'Connor,et al.  A mathematical model of forces in the knee under isometric quadriceps contractions. , 2000, Clinical biomechanics.

[14]  J. O'Connor,et al.  The components of passive knee movement are coupled to flexion angle. , 2000, Journal of biomechanics.

[15]  E. Abdel-Rahman,et al.  Three-dimensional dynamic behaviour of the human knee joint under impact loading. , 1998, Medical engineering & physics.

[16]  J. O'Connor,et al.  Biarticulating two-dimensional computer model of the human patellofemoral joint. , 1996, Clinical biomechanics.

[17]  Gerard A. Ateshian,et al.  Patellofemoral Stresses during Open and Closed Kinetic Chain Exercises , 2001, The American journal of sports medicine.

[18]  Z K Ling,et al.  Analytical study on the kinematic and dynamic behaviors of a knee joint. , 1997, Medical engineering & physics.

[19]  P S Walker,et al.  The load-bearing area in the knee joint. , 1972, Journal of biomechanics.

[20]  E. Grood,et al.  Factors affecting the region of most isometric femoral attachments , 1989, The American journal of sports medicine.

[21]  Mohamed Samir Hefzy,et al.  Review of Knee Models , 1988 .

[22]  S L Woo,et al.  A validated three-dimensional computational model of a human knee joint. , 1999, Journal of biomechanical engineering.

[23]  G. Fleisig,et al.  A Comparison of Tibiofemoral Joint Forces and Electromyographic Activit During Open and Closed Kinetic Chain Exercises , 1996, The American journal of sports medicine.

[24]  S L Woo,et al.  Quadriceps/anterior cruciate graft interaction. An in vitro study of joint kinematics and anterior cruciate ligament graft tension. , 1993, Clinical orthopaedics and related research.

[25]  M. S. Hefzy,et al.  Effects of tibial rotations on patellar tracking and patello-femoral contact areas. , 1992, Journal of biomedical engineering.

[26]  K. An,et al.  Dynamic joint forces during knee isokinetic exercise , 1991, The American journal of sports medicine.

[27]  J. O'Connor,et al.  Ligaments and articular contact guide passive knee flexion. , 1998, Journal of biomechanics.

[28]  T. Derek V. Cooke,et al.  Review of Knee Models: 1996 Update , 1996 .

[29]  M. S. Hefzy,et al.  A three-dimensional anatomical model of the human patello-femoral joint, for the determination of patello-femoral motions and contact characteristics. , 1993, Journal of biomedical engineering.

[30]  J. Irrgang,et al.  Biomechanical considerations for rehabilitation of the knee. , 2000, Clinical biomechanics.

[31]  G A Ateshian,et al.  Biomechanics of diarthrodial joints: a review of twenty years of progress. , 1993, Journal of biomechanical engineering.

[32]  R Huiskes,et al.  The biomechanics of the human patella during passive knee flexion. , 1995, Journal of biomechanics.

[33]  E S Grood,et al.  A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. , 1983, Journal of biomechanical engineering.

[34]  Jeremy Suggs,et al.  The effect of graft stiffness on knee joint biomechanics after ACL reconstruction--a 3D computational simulation. , 2003, Clinical biomechanics.

[35]  M. Hull,et al.  A finite element model of the human knee joint for the study of tibio-femoral contact. , 2002, Journal of biomechanical engineering.

[36]  J. S. Rovick,et al.  Relation between knee motion and ligament length patterns. , 1991, Clinical biomechanics.

[37]  T. van Eijden,et al.  A mathematical model of the patellofemoral joint. , 1986, Journal of biomechanics.

[38]  Linda R. Petzold,et al.  Numerical solution of initial-value problems in differential-algebraic equations , 1996, Classics in applied mathematics.

[39]  Moshe Solomonow,et al.  Anterior-posterior and rotational displacement of the tibia elicited by quadriceps contraction , 1992, The American journal of sports medicine.

[40]  W. Liu,et al.  The effect of hamstring muscle compensation for anterior laxity in the ACL-deficient knee during gait. , 2000, Journal of biomechanics.

[41]  D. Hungerford,et al.  Experimental determination of forces transmitted through the patello-femoral joint. , 1988, Journal of biomechanics.

[42]  Jeremy Suggs,et al.  The Effect of Anterior Cruciate Ligament Injury on Knee Joint Function under a Simulated Muscle Load: A Three-Dimensional Computational Simulation , 2002, Annals of Biomedical Engineering.

[43]  A. M. Ahmed,et al.  In-vitro measurement of static pressure distribution in synovial joints--Part II: Retropatellar surface. , 1983, Journal of biomechanical engineering.

[44]  R. Takeuchi,et al.  Patello-femoral contact area and compressive force after anteromedial displacement of tibial tuberosity in amputated knees , 1999 .