Intelligent Sensor Based Bayesian Neural Network for Combined Parameters and States Estimation of a Brushed DC Motor

The objective of this paper is to develop an Artificial Neural Network (ANN) model to estimate simultaneously, parameters and state of a brushed DC machine. The proposed ANN estimator is novel in the sense that his estimates simultaneously temperature, speed and rotor resistance based only on the measurement of the voltage and current inputs. Many types of ANN estimators have been designed by a lot of researchers during the last two decades. Each type is designed for a specific application. The thermal behavior of the motor is very slow, which leads to large amounts of data sets. The standard ANN use often Multi-Layer Perceptron (MLP) with Levenberg-Marquardt Backpropagation (LMBP), among the limits of LMBP in the case of large number of data, so the use of MLP based on LMBP is no longer valid in our case. As solution, we propose the use of Cascade-Forward Neural Network (CFNN) based Bayesian Regulation backpropagation (BRBP). To test our estimator robustness a random white-Gaussian noise has been added to the sets. The proposed estimator is in our viewpoint accurate and robust.

[1]  R. Beguenane,et al.  Induction motors thermal monitoring by means of rotor resistance identification , 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

[2]  R.H.Jr. Welch,et al.  How temperature affects a servomotor's electrical and mechanical time constants , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[3]  George Kalliris,et al.  Bowel-sound pattern analysis using wavelets and neural networks with application to long-term, unsupervised, gastrointestinal motility monitoring , 2008, Expert Syst. Appl..

[4]  T. G. Habetler,et al.  An Evaluation of Model-Based Stator Resistance Estimation for Induction Motor Stator Winding Temperature Monitoring , 2002, IEEE Power Engineering Review.

[5]  S. Haykin.  Kalman Filtering and Neural Networks , 2001 .

[6]  M.E.H. Benbouzid,et al.  H-G diagram based rotor parameters identification for induction motors thermal monitoring , 2000 .

[7]  Michel Hecquet,et al.  Multiphysics Modeling: Electro-Vibro-Acoustics and Heat Transfer of PWM-Fed Induction Machines , 2010, IEEE Transactions on Industrial Electronics.

[8]  Jens Sadowski,et al.  Comparison of Support Vector Machine and Artificial Neural Network Systems for Drug/Nondrug Classification , 2003, J. Chem. Inf. Comput. Sci..

[9]  S. Agatonovic-Kustrin,et al.  Basic concepts of artificial neural network (ANN) modeling and its application in pharmaceutical research. , 2000, Journal of pharmaceutical and biomedical analysis.

[10]  Neural networks for instrumentation, measurement and related industrial applications , 2003 .

[11]  Y. Tipsuwan,et al.  Neural plug-in motor coil thermal modeling , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[12]  L. J. Grobler,et al.  Heating, ventilation and air conditioning management by means of indoor temperature measurements , 2012, 2012 Proceedings of the 9th Industrial and Commercial Use of Energy Conference.

[13]  S. Andrew Gadsden,et al.  Nonlinear estimation of stator winding resistance in a brushless DC motor , 2013, 2013 American Control Conference.

[14]  T. Chunder.  Temperature rise measurement in armature of a DC motor, under running conditions, by telemetry , 1993 .

[15]  Hacene Mellah,et al.  Stochastic Estimation Methods for Induction Motor Transient Thermal Monitoring Under Non Linear Condition , 2012 .

[16]  Russell C. Eberhart,et al.  A new optimizer using particle swarm theory , 1995, MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science.

[17]  L. Michalski,et al.  Temperature Measurement, 2nd edn , 2002 .

[18]  T.G. Habetler,et al.  An on-line stator winding resistance estimation technique for temperature monitoring of line-connected induction machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[19]  Thomas G. Habetler,et al.  A thermal monitoring and parameter tuning scheme for induction machines , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[20]  E. Mizutani,et al.  Neuro-Fuzzy and Soft Computing-A Computational Approach to Learning and Machine Intelligence [Book Review] , 1997, IEEE Transactions on Automatic Control.

[21]  R. Pantonial,et al.  Real time thermal estimation of a Brushed DC Motor by a steady-state Kalman filter algorithm in multi-rate sampling scheme , 2012, TENCON 2012 IEEE Region 10 Conference.

[22]  T.G. Habetler,et al.  An adaptive Kalman filtering approach to induction machine stator winding temperature estimation based on a hybrid thermal model , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[23]  Wu Zhe,et al.  Helicopter engine performance prediction based on cascade-forward process neural network , 2012, 2012 IEEE Conference on Prognostics and Health Management.

[24]  R. Harley,et al.  A stator and rotor resistance estimation technique for conductor temperature monitoring , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[25]  Andrzej Cichocki,et al.  Neural networks for optimization and signal processing , 1993 .

[26]  Bogdan M. Wilamowski,et al.  How to not get frustrated with neural networks , 2011, 2011 IEEE International Conference on Industrial Technology.

[27]  L. P. J. Veelenturf,et al.  Analysis and applications of artificial neural networks , 1995 .

[28]  Soteris A. Kalogirou,et al.  Artificial neural networks in renewable energy systems applications: a review , 2001 .

[29]  Predrag Osmokrovic,et al.  A novel approach for temperature estimation in squirrel-cage induction motor without sensors , 1999, IEEE Trans. Instrum. Meas..

[30]  Madan M. Gupta,et al.  Static and Dynamic Neural Networks: From Fundamentals to Advanced Theory , 2003 .

[31]  Christophe Espanet,et al.  BLDC motor stator and rotor iron losses and thermal behavior based on lumped schemes and 3D FEM analysis , 2002 .

[32]  H. Chouiref,et al.  Fuzzy logic parameter estimation of an electrical system , 2008, 2008 5th International Multi-Conference on Systems, Signals and Devices.

[33]  J. F. Moreno,et al.  Realisation of tests to determine the parameters of the thermal model of an induction machine , 2001 .

[34]  Lakhmi C. Jain,et al.  Fusion of Neural Networks, Fuzzy Sets, and Genetic Algorithms: Industrial Applications , 1998 .

[35]  G. Bucci,et al.  Metrological characterization of a contactless smart thrust and speed sensor for linear induction motor testing , 1996 .

[36]  J. K. Al-Tayie,et al.  Estimation of speed and armature temperature in a brushed DC drive using the extended Kalman filter , 1997 .

[37]  Giovanni Bucci,et al.  Variable Speed Drive Characterization: Review of Measurement Techniques and Future Trends , 2013 .