High-speed, high-power switching of semiconductor devices

Pulse switching characteristics of GTO thyristors and IGBT are reported. Switching characteristics of devices were initially investigated. For GTO, pulse switching with voltage of 3000 V, peak current of 9000 A, and di/dt of 8000 A//spl mu/s were verified. 800 V, 1500 A, 2600 A//spl mu/s were obtained with IGBT. Next, high-voltage switch modules consisting of these devices were designed and tested. The GTO switch module, consisting of five series devices, was of coaxial construction. Blocking voltage of 11.5 kV, current of 4500 A, di/dt of 2500 A//spl mu/s were obtained with this switch module at a repetition rate of 100 pps. The IGBT switch module, consisting of ten series and two parallel devices, was of parallel conductor construction. With this switch module, blocking voltage of 6 kV, current of 2200 A, di/dt of 3000 A//spl mu/s were obtained.

[1]  T. Ogura,et al.  Low switching loss, high power gate turn-off thyristors (GTOs) with n-buffer and new anode short structure , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[2]  Jerry L. Hudgins,et al.  High di/dt Pulse Switching of Thyristors , 1987, IEEE Transactions on Power Electronics.

[3]  M. Kurata,et al.  Experimental and numerical study of non-latch-up bipolar-mode MOSFET characteristics , 1985, 1985 International Electron Devices Meeting.

[4]  Jerry L. Hudgins,et al.  High di/dt switching with thyristors , 1988, IEEE Conference Record of the 1988 Eighteenth Power Modulator Symposium.

[5]  J. Vitins,et al.  Power semiconductor devices for sub-microsecond laser pulse generation , 1988, IEEE Conference Record of the 1988 Eighteenth Power Modulator Symposium.