论文信息 - 1.8 dB NF 3.6 mW CMOS active balun low noise amplifier for GPS

1.8 dB NF 3.6 mW CMOS active balun low noise amplifier for GPS

A 1.227 GHz low power single-ended input, differential output low noise amplifier (balun LNA) for GPS is proposed. A two stage structure with current-reused technique is adopted to achieve low power, low noise factor and high voltage gain simultaneously. The LNA is fabricated in 0.18 µm CMOS process, consuming only 2 mA current from a 1.8 V supply. The LNA is measured to exhibit a differential voltage gain of 30.4 dB and a noise figure of 1.8 dB.

[1] Kwyro Lee,et al. A 19-mW 2.6-mm2 L1/L2 dual-band CMOS GPS receiver , 2005, IEEE J. Solid State Circuits.

[2] S. Godsill,et al. The Institution of Engineering and Technology Seminar on Target Tracking and Data Fusion , 2008 .

[3] Tamer A. Abdelrahim,et al. A 12-mW Fully Integrated Low-IF dual-band GPS Receiver on 0.13-μm CMOS , 2007, 2007 IEEE International Symposium on Circuits and Systems.

[4] John E. Shelton. People's Republic of China , 1973 .

[5] Kwyro Lee,et al. A 19-mW 2.6-mm2 L1/L2 dual-band CMOS GPS receiver , 2005 .

[6] B. Nauta,et al. Wide-band CMOS low-noise amplifier exploiting thermal noise canceling , 2004, IEEE Journal of Solid-State Circuits.

[7] Trung-Kien Nguyen,et al. A power constrained simultaneous noise and input matched low noise amplifier design technique , 2004, 2004 IEEE International Symposium on Circuits and Systems (IEEE Cat. No.04CH37512).

[8] Thomas H. Lee,et al. The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES , 2003 .