3D Cable-Based Cartesian Metrology System

A novel cable-based metrology system is presented wherein six cables are connected in parallel from ground-mounted string pots to the moving object or tool of interest. Cartesian pose can be determined for feedback control and other purposes by reading the lengths of the six cables via the string pots and using closed-form forward pose kinematics. This article focuses on a sculpting metrology tool, assisting a human artist in generating a piece from a computer model, but applications exist in manufacturing, rapid prototyping, robotics, and automated construction. We present experimental data to demonstrate the operation of our system, we study the absolute accuracy and also measurement resolution, and we discuss various error sources. The proposed real-time cable-based metrology system is less complex and more economical than existing commercial Cartesian metrology technologies. © 2004 Wiley Periodicals, Inc.

[1]  Paolo Gallina,et al.  Planar Translational Cable-Direct-Driven Robots , 2003, J. Field Robotics.

[2]  Yuxin Su,et al.  Development of a large parallel-cable manipulator for the feed-supporting system of a next-generation large radio telescope , 2001, J. Field Robotics.

[3]  Yoon Keun Kwak,et al.  Development of a parallel wire mechanism for measuring position and orientation of a robot end-effector , 1998 .

[4]  H. Ferguson,et al.  Stone sculpture from equations , 1998, Proceedings of the 1998 IEEE International Symposium on Intelligent Control (ISIC) held jointly with IEEE International Symposium on Computational Intelligence in Robotics and Automation (CIRA) Intell.

[5]  C. J. Thompson,et al.  Charlotte™ Robot Technology for Space and Terrestrial Applications , 1995 .

[6]  Morris Driels,et al.  Automated partial pose measurement system for manipulator calibration experiments , 1994, IEEE Trans. Robotics Autom..

[7]  John H. Maddocks,et al.  On the Forward Kinematics of Parallel Manipulators , 1994, Int. J. Robotics Res..

[8]  Leonard S. Haynes,et al.  A “3-2-1” kinematic configuration of a Stewart platform and its application to six degree of freedom pose measurements , 1994 .

[9]  James S. Albus,et al.  The NIST robocrane , 1993, J. Field Robotics.

[10]  Francis L. Merat,et al.  Introduction to robotics: Mechanics and control , 1987, IEEE J. Robotics Autom..

[11]  Todd Graham,et al.  On the inverse kinematics, statics, and fault tolerance of cable-suspended robots , 1998, J. Field Robotics.