Shear Cap Size Selection Method Based on Parametric Analysis of ACI-318 Code and Eurocode 2 Standard

The scope of the paper is to propose a method for determining the size of shear caps in a slab–column-connections-reinforced concrete structure. Usually, shear heads are used to enhance slab–column connection, especially when the transverse reinforcement does not give the required punching shear load capacity. The dimensions of the shear head should provide the punching shear resistance of the connection inside and outside the enhanced region. The process of selecting the size of the shear head is iterative. The parametric analysis of the ACI 318 code and EC2 standard has the objective of indicating which control perimeter (inside or outside the shear head) has a decisive impact on the punching shear capacity of the connection. Based on the analysis, the authors propose methods for selecting the dimensions of the shear head with practical application examples. The paper is intended to provide scientists, civil engineers, and designers with guidelines to design the process of the slab–column connections with the shear caps.

[1]  Walter H. Dilger,et al.  Influence of Slab Thickness on Punching Shear Strength , 2008 .

[2]  J. Hegger,et al.  Contribution of concrete and shear reinforcement to the punching shear resistance of flat slabs , 2020 .

[3]  H. K. Cheong,et al.  Punching shear strength of slabs with openings and supported on rectangular columns , 2004 .

[4]  Aurelio Muttoni,et al.  Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement , 2011 .

[5]  Aurelio Muttoni,et al.  Punching shear strength of reinforced concrete slabs without transverse reinforcement , 2008 .

[6]  H. Marzouk,et al.  Experimental Investigation on the Behavior of High-Strength Concrete Slabs , 1992 .

[7]  Neil M. Hawkins,et al.  INFLUENCE OF COLUMN RECTANGULARITY ON THE BEHAVIOR OF FLAT PLATE STRUCTURES , 1971 .

[8]  Beatrice Belletti,et al.  Evaluation of compressive membrane action effects on punching shear resistance of reinforced concrete slabs , 2015 .

[9]  Aurelio Muttoni,et al.  Study on Influence of Column Size and Slab Slenderness on Punching Strength , 2016 .

[10]  Eivind Hognestad,et al.  Shearing Strength of Reinforced Concrete Slabs , 1956 .

[11]  Aurelio Muttoni,et al.  Influence of moment redistribution and compressive membrane action on punching strength of flat slabs , 2015 .

[12]  P. E. Regan,et al.  Punching resistance of RC slabs with rectangular columns , 2004 .

[13]  Ian N. Robertson,et al.  Cyclic lateral loading of nonductile slab-column connections , 2006 .

[14]  Abdullah Dönmez,et al.  Size effect on punching strength of reinforced concrete slabs with and without shear reinforcement , 2017 .

[15]  G. Melo,et al.  Punching shear in reinforced concrete flat slabs with hole adjacent to the column and moment transfer Punção em lajes lisas de concreto armado com furo adjacente ao pilar e transferência de momento , 2014 .

[16]  S. Kinnunen,et al.  Punching of concrete slabs without shear reinforcement , 1960 .

[17]  G. Melo,et al.  Punching Shear of Reinforced Concrete Flat Plates with Openings , 2013 .

[18]  R. P. Johnson,et al.  General rules and rules for buildings , 2004 .

[19]  Aurelio Muttoni,et al.  Punching of flat slabs supported on rectangular columns , 2014 .

[20]  Aurelio Muttoni,et al.  The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions , 2010 .

[21]  Aurelio Muttoni,et al.  Closure of discussion on paper "Punching Tests of Slabs with Low Reinforcement Ratios" , 2009 .

[22]  Susanto Teng,et al.  Cyclic Behavior of Post-Tensioned Slab-Rectangular Column Connections , 2014 .

[23]  M. F. Ruiz,et al.  Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack , 2020 .

[24]  J. Hegger,et al.  Punching shear behavior of reinforced concrete footings with a varying amount of shear reinforcement , 2018, Structural Concrete.

[25]  Joost C. Walraven,et al.  Shear in One-Way Slabs under Concentrated Load Close to Support , 2013 .

[26]  V. Lúcio,et al.  Punching behaviour of RC flat slabs under reversed horizontal cyclic loading , 2016 .

[27]  Stefan Lips,et al.  Punching of Flat Slabs with Large Amounts of Shear Reinforcement , 2012 .

[28]  P. Chana,et al.  MEMBRANE ACTION, AND DESIGN AGAINST PUNCHING SHEAR , 1992 .

[29]  M. Daniel Vanderbilt,et al.  Shear Strength of Continuous Plates , 1972 .

[30]  M. D. Vanderbilt,et al.  Shear Strength of Lightweight Aggregate Reinforced Concrete Flat Plates , 1967 .