Effectiveness of phase change material in improving the summer thermal performance of an office building under future climate conditions: An investigation study for the Moroccan Mediterranean climate zone

[1]  D. Ting,et al.  Energy consumption of a building with phase change material walls – The effect of phase change material properties , 2022, Journal of Energy Storage.

[2]  M. A. Medina,et al.  A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling , 2021, Journal of Energy Storage.

[3]  Abdulwahab A. Alnaqi,et al.  Usefulness of loading PCM into envelopes in arid climate based on Köppen–Geiger classification - Annual assessment of energy saving and GHG emission reduction , 2021, Journal of Energy Storage.

[4]  M. Sheremet,et al.  Influence of phase change material melting point and its location on heat and mass transfer in a brick , 2021 .

[5]  Yassine Kharbouch,et al.  Prediction of the impact of climate change on the thermal performance of walls and roof in Morocco , 2021, International Review of Applied Sciences and Engineering.

[6]  T. Mouhib,et al.  Effect of mechanical ventilation on the improvement of the thermal performance of PCM-incorporated double external walls: A numerical investigation under different climatic conditions in Morocco , 2021, Journal of Energy Storage.

[7]  S. Memon,et al.  A novel approach to investigate the thermal comfort of the lightweight relocatable building integrated with PCM in different climates of Kazakhstan during summertime , 2021 .

[8]  Brent R. Young,et al.  Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling , 2015, Thermal Energy Storage with Phase Change Materials.

[9]  S. Memon,et al.  Quantitative evaluation of the thermal and energy performance of the PCM integrated building in the subtropical climate zone for current and future climate scenario , 2020 .

[10]  Sami G. Al‐Ghamdi,et al.  Efficiency of green roofs and green walls as climate change mitigation measures in extremely hot and dry climate: Case study of Qatar , 2020 .

[11]  Yanna Gao,et al.  Thermal behavior analysis of hollow bricks filled with phase-change material (PCM) , 2020 .

[12]  Leif Gustavsson,et al.  Energy savings and overheating risk of deep energy renovation of a multi-storey residential building in a cold climate under climate change , 2020 .

[13]  José-Luis Vivancos,et al.  Impact of climate change on heating and cooling energy demand in a residential building in a Mediterranean climate , 2018, Energy.

[14]  Abdelaziz Mimet,et al.  Thermal energy and economic analysis of a PCM-enhanced household envelope considering different climate zones in Morocco , 2018 .

[15]  A. Mimet,et al.  Thermal performance investigation of a PCM-enhanced wall/roof in northern Morocco , 2018 .

[16]  Luisa F. Cabeza,et al.  Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings , 2017 .

[17]  Abdelmajid Farchi,et al.  A study on the optimum insulation thicknesses of building walls with respect to different zones in Morocco , 2017 .

[18]  Hong Wu,et al.  Effect of Summer Ventilation on the Thermal Performance and Energy Efficiency of Buildings Utilizing Phase Change Materials , 2017 .

[19]  John L. Wilson,et al.  Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events , 2017 .

[20]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[21]  Jiawei Lei,et al.  Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore , 2016 .

[22]  Luisa F. Cabeza,et al.  Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .

[23]  Leonardo Vanneschi,et al.  Prediction of energy performance of residential buildings: a genetic programming approach , 2015 .

[24]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[25]  Giuseppe Peter Vanoli,et al.  Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season , 2014 .

[26]  Zhiqiang Zhai,et al.  Modeling phase change materials embedded in building enclosure: A review , 2013 .

[27]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[28]  A.L.S. Chan,et al.  Energy and environmental performance of building façades integrated with phase change material in subtropical Hong Kong , 2011 .

[29]  Danny H.W. Li,et al.  Assessment of climate change impact on building energy use and mitigation measures in subtropical climates , 2011 .

[30]  Yong Chen,et al.  Validation of Veracity on Simulating the Indoor Temperature in PCM Light Weight Building by EnergyPlus , 2010, LSMS/ICSEE.

[31]  Fu-Sheng Gao,et al.  Night ventilation control strategies in office buildings , 2009 .

[32]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[33]  B. Rudolf,et al.  World Map of the Köppen-Geiger climate classification updated , 2006 .

[34]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .