A generalized analytical approach to the coupled effect of SMA actuation and elastica deflection

A compliant miniature parallel manipulator made of superelastic nitinol pipe as its central pillar and actuated by three symmetrically attached shape memory alloy (SMA) wires is under development. The mobility for the platform is obtained by the selective actuation of one or two wires at a time. If one wire is actuated, the other two unactuated wires provide the counter effect. Similarly, if two wires are actuated simultaneously or in a differential manner, the third unactuated wire resists the movement of the platform. In an earlier work of the authors, the static displacement analysis was presented without considering the effect of unactuated wires. In this contribution, the force–displacement analysis is presented considering the effect of both actuated and unactuated wires. Subsequently, an attempt has been made to obtain a generalized approach from which six types of actuation methods are identified using a group of conditional parameters. Each method leads to a set of large deflection expressions suitable for a particular actuation method. As the large deflection expressions derived for the mechanism are nonlinear and involve interdependent parameters, their simplified form using a parametric approximation have also been obtained using Howell's algorithm. The generalized approach and the solution algorithm developed can be applied to any kind of compliant mechanism having large deflection capabilities, including planar and spatial MEMS devices and stability analysis of long slender columns supported by wires or cables. The procedure developed is also suitable for the static analysis of spatial compliant mechanisms actuated by multiple SMA actuators.

[1]  Maenghyo Cho,et al.  Numerical simulation of a double SMA wire actuator using the two-way shape memory effect of SMA , 2007 .

[2]  Mehrdad Moallem.  Deflection control of a flexible beam using shape memory alloy actuators , 2003 .

[3]  L. Tsai,et al.  Modeling of Flexural Beams Subjected to Arbitrary End Loads , 2002 .

[4]  M. Singaperumal,et al.  Design of a Shape Memory Alloy Actuated Compliant Smart Structure: Elastica Approach , 2009 .

[5]  Dimitris C. Lagoudas,et al.  Active flexible rods with embedded SMA fibers , 1992 .

[6]  Andrew Y. C. Nee,et al.  An approach to automating modular fixture design and assembly , 1997 .

[7]  D. Lagoudas,et al.  Thermomechanical Response of Shape Memory Composites , 1994 .

[8]  F. De Bona,et al.  A generalized elastica-type approach to the analysis of large displacements of spring-strips , 1997 .

[9]  S Kota,et al.  Design and application of compliant mechanisms for surgical tools. , 2005, Journal of biomechanical engineering.

[10]  Larry L. Howell,et al.  Limit positions of compliant mechanisms using the pseudo-rigid-body model concept , 2000 .

[11]  Kwun-Lon Ting,et al.  SMA actuated compliant bistable mechanisms , 2004 .

[12]  Joseph Genin,et al.  Nonlinear static behavior of a cantilever subjected to an inclined follower force , 1971 .

[13]  A. Midha,et al.  Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms , 1995 .

[14]  Vincenzo Parenti-Castelli,et al.  A novel technique for position analysis of planar compliant mechanisms , 2005 .

[15]  Augusto Beléndez,et al.  Numerical and experimental analysis of a cantilever beam: a laboratory project to introduce geometric nonlinearity in mechanics of materials , 2003 .

[16]  James F. Doyle,et al.  Nonlinear Analysis of Thin-Walled Structures , 2001 .

[17]  Dimitris C. Lagoudas,et al.  Residual deformation of active structures with SMA actuators , 1999 .

[18]  Larry L. Howell,et al.  On the Nomenclature, Classification, and Abstractions of Compliant Mechanisms , 1994 .

[19]  Stephen L. Canfield,et al.  A Model for Optimization and Control of Spatial Compliant manipulators , 2006, Int. J. Robotics Autom..

[20]  J Fisher,et al.  Wear simulation of ultra-high molecular weight polyethylene hip implants by incorporating the effects of cross-shear and contact pressure , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[21]  M. Singaperumal,et al.  Modelling and simulation of a novel shape memory alloy actuated compliant parallel manipulator , 2008 .

[22]  Larry L. Howell,et al.  Optimal loading conditions for non-linear deflections , 1997 .

[23]  B. Krevet,et al.  Finite element simulation of SMA microactuators with large deflection , 2004 .

[24]  Anupam Saxena,et al.  A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments , 1998 .

[25]  John T. Wen,et al.  Modeling of a flexible beam actuated by shape memory alloy wires , 1997 .

[26]  Ralph C. Smith,et al.  Smart material systems - model development , 2005, Frontiers in applied mathematics.

[27]  M. Sreekumar,et al.  Experimental investigations of the large deflection capabilities of a compliant parallel mechanism actuated by shape memory alloy wires , 2008 .

[28]  Chao-Chieh Lan,et al.  Generalized Shooting Method for Analyzing Compliant Mechanisms With Curved Members , 2006 .

[29]  U. Icardi.  Large bending actuator made with SMA contractile wires: theory, numerical simulation and experiments , 2001 .

[30]  M. I.Z. Ridzwan,et al.  Methodology of Compliant Mechanisms and its Current Developments in Applications: A Review , 2007 .