Potentiometric sensors for trace-level analysis.

This review summarizes recent progress in the development and application of potentiometric sensors with limits of detection (LODs) in the range 10(-8)-10(-11) M. These LODs relate to total sample concentrations and are defined according to a definition unique to potentiometric sensors. LODs calculated according to traditional protocols (three times the standard deviation of the noise) yield values that are two orders of magnitude lower. We are targeting this article at analytical chemists who are non-specialists in the development of such sensors so that this technology may be adopted by a growing number of research groups to solve real-world analytical problems.We discuss the unique response features of potentiometric sensors and compare them to other analytical techniques, emphasizing that the choice of the method must depend on the problem of interest. We discuss recent directions in sensor design and development and present a list of 23 sensors with low LODs, with references. We give recent examples where potentiometric sensors have been used to solve trace-level analytical problems, including the speciation of lead and copper ions in drinking water, the measurement of free copper in sea water, and the uptake of cadmium ions by plant roots as a function of their speciation.

[1]  Richard P. Buck,et al.  Electroanalytical Chemistry of Membranes , 1975 .

[2]  Ernö Pretsch,et al.  A polypyrrole-based solid-contact Pb2+-selective PVC-membrane electrode with a nanomolar detection limit , 2004, Analytical and bioanalytical chemistry.

[3]  E. Pretsch,et al.  Large Improvement of the Lower Detection Limit of Ion-Selective Polymer Membrane Electrodes , 1997 .

[4]  H. Hill,et al.  Evaluating the separation of amphetamines by electrospray ionization ion mobility spectrometry/MS and charge competition within the ESI process. , 2002, Analytical chemistry.

[5]  N. D. de Rooij,et al.  Potential Drifts of Solid‐Contacted Ion‐Selective Electrodes Due to Zero‐Current Ion Fluxes Through the Sensor Membrane , 2000 .

[6]  W. E. Morf,et al.  Making use of ion fluxes through potentiometric sensor membranes: ISEs with step responses at critical ion activities , 2001 .

[7]  Martin J T Milton,et al.  Analytical techniques for trace element analysis: an overview , 2005 .

[8]  Markus Lerchi,et al.  Lead-selective bulk optodes based on neutral ionophores with subnanomolar detection limits , 1992 .

[9]  P. Bühlmann,et al.  Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 2. Ionophores for Potentiometric and Optical Sensors. , 1998, Chemical reviews.

[10]  B. Hattendorf,et al.  Potentiometric polymeric membrane electrodes for measurement of environmental samples at trace levels: new requirements for selectivities and measuring protocols, and comparison with ICPMS. , 2001, Analytical chemistry.

[11]  E. Pretsch,et al.  Detection limit of ion-selective bulk optodes and corresponding electrodes , 1993 .

[12]  S. Manahan,et al.  Copper determination in water by standard addition potentiometry , 1973 .

[13]  Richard P. Buck,et al.  Peer Reviewed: Tracing the History of Selective Ion Sensors , 2001 .

[14]  Ernö Pretsch,et al.  Lowering the detection limit of solvent polymeric ion-selective electrodes. 1. Modeling the influence of steady-state ion fluxes , 1999 .

[15]  E. Bakker,et al.  Effect of Transmembrane Electrolyte Diffusion on the Detection Limit of Carrier-Based Potentiometric Ion Sensors , 1998 .

[16]  B. Pejcic,et al.  The Influence of Diffusion Fluxes on the Detection Limit of the Jalpaite Copper Ion-Selective Electrode , 2002 .

[17]  A. Hulanicki,et al.  Effect of a plasticizer on the detection limit of calcium-selective electrodes , 2002 .

[18]  T. Imato,et al.  Vitamin B1 sensitive poly(vinyl chloride) membrane electrode based on hydrophobic tetraphenylborate derivatives and their application , 1990 .

[19]  E. Pretsch,et al.  Influence of key parameters on the lower detection limit and response function of solvent polymeric membrane ion-selective electrodes , 2001 .

[20]  A. Lewenstam,et al.  Diffusion-layer model for copper solid-state chalcocite membrane electrode; sensitivity to copper(II) ions. , 1976, Talanta.

[21]  E. Bakker,et al.  Mass-produced lonophore-based fluorescent microspheres for trace level determination of lead ions. , 2002, Analytical chemistry.

[22]  E. Pretsch,et al.  Influence of Incorporated Lipophilic Particles on Ion Fluxes Through Polymeric Ion-Selective Membranes , 2003 .

[23]  K. Kuchler,et al.  The ATP‐binding cassette (ABC) transporter Bpt1p mediates vacuolar sequestration of glutathione conjugates in yeast , 2002, FEBS letters.

[24]  W. Qin,et al.  Improving the detection limit of anion-selective electrodes: an iodide-selective membrane with a nanomolar detection limit. , 2003, Analytical chemistry.

[25]  Ernö Pretsch,et al.  Rational design of potentiometric trace level ion sensors. A Ag+-selective electrode with a 100 ppt detection limit. , 2002, Analytical chemistry.

[26]  E. Pretsch,et al.  Potentiometric Cd2+-selective electrode with a detection limit in the low ppt range , 2001 .

[27]  A. Radu,et al.  Plasticizer-free polymer containing a covalently immobilized Ca2+-selective ionophore for potentiometric and optical sensors. , 2003, Analytical chemistry.

[28]  U. Krähenbühl,et al.  The simultaneous determination of 20 trace elements in terrestrial, lunar and meteoritic material by radiochemical neutron activation analysis , 1974 .

[29]  E. Pretsch,et al.  Neutral carrier based calcium(2+)-selective electrode with detection limit in the sub-nanomolar range , 1986 .

[30]  Eric Bakker,et al.  Pulstrodes: triple pulse control of potentiometric sensors. , 2004, Journal of the American Chemical Society.

[31]  A. Zirino,et al.  Response of the Cu(II) ion selective electrode to Cu titration in artificial and natural shore seawater and in the measurement of the Cu complexation capacity. , 2004, Environmental science & technology.

[32]  P. Bühlmann,et al.  Selectivity of potentiometric ion sensors. , 2000, Analytical chemistry.

[33]  A. Michalska,et al.  Lowering the Detection Limit of Ion-Selective Plastic Membrane Electrodes with Conducting Polymer Solid Contact and Conducting Polymer Potentiometric Sensors , 2003 .

[34]  E. Pretsch,et al.  Potentiometry at trace levels , 2001 .

[35]  E. Hall,et al.  Ion-transport and diffusion coefficients of non-plasticised methacrylic-acrylic ion-selective membranes. , 2004, Talanta.

[36]  E. Bakker,et al.  Improved detection limits and sensitivities of potentiometric titrations. , 2001, Analytical chemistry.

[37]  E. Hall,et al.  An experimental study of membrane materials and inner contacting layers for ion-selective K+ electrodes with a stable response and good dynamic range. , 2004, Analytical chemistry.

[38]  E. Pretsch,et al.  Role of fulvic acid on lead bioaccumulation by Chlorella kesslerii. , 2003, Environmental science & technology.

[39]  R. Marco,et al.  Calibration of a chalcogenide glass membrane ion-selective electrode for the determination of free Fe3+ in seawater: I. Measurements in UV photooxidised seawater , 2000 .

[40]  P. Bühlmann,et al.  The phase-boundary potential model. , 2004, Talanta.

[41]  A. van den Berg,et al.  Membrane characterization of anion-selective CHEMFETs by impedance spectroscopy. , 2000, Analytical chemistry.

[42]  R. E. Gyurcsányi,et al.  Tailored transport through ion-selective membranes for improved detection limits and selectivity coefficients , 1999 .

[43]  A. Radu,et al.  Rotating disk potentiometry for inner solution optimization of low-detection-limit ion-selective electrodes. , 2003, Analytical chemistry.

[44]  S. Kamata,et al.  Copper(II)-selective electrode using thiuram disulfide neutral carriers , 1988 .

[45]  Ernö Pretsch,et al.  Lowering the Detection Limit of Solvent Polymeric Ion-Selective Membrane Electrodes. 2. Influence of Composition of Sample and Internal Electrolyte Solution , 1999 .

[46]  E. Pretsch,et al.  Rotating Ion‐Selective Membrane Electrodes for Trace‐Level Measurements , 2003 .

[47]  E. Pungor,et al.  Ion-selective membrane electrodes. A review , 1970 .

[48]  Ernö Pretsch,et al.  Improving the lower detection limit of potentiometric sensors by covalently binding the ionophore to a polymer backbone , 2004 .

[49]  R. E. Gyurcsányi,et al.  Picomolar detection limits with current-polarized Pb2+ ion-selective membranes. , 2001, Analytical chemistry.

[50]  W. E. Morf,et al.  Theoretical treatment of the selectivity and detection limit of silver compound membrane electrodes , 1974 .

[51]  Ernö Pretsch,et al.  Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 1. General Characteristics. , 1997, Chemical reviews.

[52]  J. Veselý,et al.  Ion-selective electrodes based on silver sulphide , 1972 .

[53]  D. Midgley.  Limit of detection in analysis with ion-selective electrodes , 1979 .

[54]  Qin,et al.  Improved detection limits and unbiased selectivity coefficients obtained by using ion-exchange resins in the inner reference solution of ion-selective polymeric membrane electrodes , 2000, Analytical chemistry.

[55]  Shaff,et al.  Development, Characterization, and Application of a Cadmium-Selective Microelectrode for the Measurement of Cadmium Fluxes in Roots of Thlaspi Species and Wheat , 1998, Plant physiology.

[56]  R. de Marco,et al.  Calibration of the Hg chalcogenide glass membrane ion-selective electrode in seawater media. , 1999, Talanta.

[57]  Patience, determination, and doggedness , 2004, Analytical and bioanalytical chemistry.

[58]  E. Bakker,et al.  General description of the simultaneous response of potentiometric ionophore-based sensors to ions of different charge. , 1999, Analytical chemistry.

[59]  L. A. Currie,et al.  Nomenclature in evaluation of analytical methods including detection and quantification capabilities (IUPAC Recommendations 1995) , 1995 .

[60]  Ernö Pretsch,et al.  Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range , 2004 .

[61]  P. Seligman,et al.  Copper and pH in the surface waters of the eastern tropical Pacific Ocean and the Peruvian upwelling system , 1983 .