Uncertainty quantification and sensitivity analysis of aerothermal performance for the turbine blade squealer tip

[1]  Jun Li,et al.  An aerothermal analysis of the effects of tip gap height and cavity depth of a gas turbine blade , 2020 .

[2]  H. Kahveci,et al.  Effect of cavity depth on thermal performance of a cooled blade tip under rotation , 2019, International Journal of Heat and Mass Transfer.

[3]  Jun Li,et al.  Effects of the squealer winglet structures on the heat transfer characteristics and aerodynamic performance of turbine blade tip , 2019, International Journal of Heat and Mass Transfer.

[4]  Xiaokai Sun,et al.  Uncertainty analysis of trench film cooling on flat plate , 2019, Applied Thermal Engineering.

[5]  Jing Ren,et al.  Uncertainty Quantification of the Effects of Small Manufacturing Deviations on Film Cooling: A Fan-Shaped Hole , 2019, Aerospace.

[6]  Jianyang Yu,et al.  Effect of cooling injection on the leakage flow of a turbine cascade with honeycomb tip , 2018 .

[7]  Zhengping Zou,et al.  Dominant flow structure in the squealer tip gap and its impact on turbine aerodynamic performance , 2017 .

[8]  K. Thole,et al.  State-of-the-Art Cooling Technology for a Turbine Rotor Blade , 2017, Journal of Turbomachinery.

[9]  Guillermo Paniagua,et al.  Performance Robustness of Turbine Squealer Tip Designs Due to Manufacturing and Engine Operation , 2017 .

[10]  Lipo Wang,et al.  Cooling Injection Effect on a Transonic Squealer Tip: Part 2 — Analysis of Aerothermal Interaction Physics , 2016 .

[11]  Lipo Wang,et al.  COOLING INJECTION EFFECT ON A TRANSONIC SQUEALER TIP - PART 1: EXPERIMENTAL HEAT TRANSFER RESULTS AND CFD VALIDATION , 2016 .

[12]  Andrew P. S. Wheeler,et al.  An experimental and computational study of tip clearance effects on a transonic turbine stage , 2015 .

[13]  Francesco Montomoli,et al.  Uncertainty quantification and film cooling , 2013 .

[14]  Chao Zhou,et al.  Squealer Geometry Effects on Aerothermal Performance of Tip-Leakage Flow of Cavity Tips , 2012 .

[15]  Howard P. Hodson,et al.  A New Intermittent Aspirated Probe for the Measurement of Stagnation Quantities in High Temperature Gases , 2011 .

[16]  Francesco Montomoli,et al.  Geometrical uncertainty in turbomachinery: Tip gap and fillet radius , 2011 .

[17]  N. Bloom.  The Impact of Uncertainty Shocks , 2007 .

[18]  Ronald S. Bunker,et al.  Axial Turbine Blade Tips: Function, Design, and Durability , 2006 .

[19]  Je-Chin Han,et al.  Film-Cooling Effectiveness on a Gas Turbine Blade Tip Using Pressure-Sensitive Paint , 2005 .

[20]  Je-Chin Han,et al.  Effects of rim location, rim height, and tip clearance on the tip and near tip region heat transfer of a gas turbine blade , 2004 .

[21]  H. Bungartz,et al.  Sparse grids , 2004, Acta Numerica.

[22]  Je-Chin Han,et al.  Heat-Transfer Coefficients of a Turbine Blade-Tip and Near-Tip Regions , 2002 .

[23]  Dongbin Xiu,et al.  The Wiener-Askey Polynomial Chaos for Stochastic Differential Equations , 2002, SIAM J. Sci. Comput..

[24]  Minking K. Chyu,et al.  Heat Transfer in the Tip Region of Grooved Turbine Blades , 1989 .

[25]  Minking K. Chyu,et al.  Cavity Heat Transfer on a Transverse Grooved Wall in a Narrow Flow Channel , 1989 .

[26]  D. G. Cherry,et al.  Energy efficient engine. Low pressure turbine test hardware detailed design report , 1982 .

[27]  N. Wiener.  The Homogeneous Chaos , 1938 .

[28]  B. Sundén,et al.  Computational analysis of the influences of guide ribs/vanes on enhanced heat transfer of a turbine blade tip-wall , 2012 .