Absorption solar cooling systems using optimal driving temperatures

The optimum instantaneous driving temperature of a solar cooling facility is determined along a day. The chillers compared use single effect cycles working with NH3/LiNO3, either conventional or hybridised by incorporating a low pressure booster compressor. Their performances are compared with a H2O/LiBr single effect absorption chiller as part of the same solar system. The results of a detailed thermodynamic cycle for the absorption chillers allow synthesizing them in a modified characteristic temperature difference model. The day accumulated solar cold production is determined using this optimum temperature during two sunny days in mid-July and mid-September, located in Madrid, Spain. The work shows the influences of operational variables and a striking result: selection of a time-constant temperature during all the day does not necessarily imply a substantial loss, being the temperature chosen a key parameter. The results indicate that the NH3/LiNO3 option with no boosting offers a smaller production above-zero Celsius degrees temperatures, but does not require higher hot water driving temperatures than H2O/LiBr. The boosted cycle offers superior performance. Some operational details are discussed.

[1]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[2]  R. Ventas,et al.  Single-effect absorption refrigeration cycle boosted with an ejector-adiabatic absorber using a single solution pump , 2014 .

[3]  M. Venegas,et al.  Experimental assessment of ammonia adiabatic absorption into ammonia–lithium nitrate solution using a flat fan nozzle , 2011 .

[4]  Roberto Best,et al.  Experimental results of a direct air-cooled ammonia–lithium nitrate absorption refrigeration system , 2014 .

[5]  V. Shanmugam,et al.  A review and new approach to minimize the cost of solar assisted absorption cooling system , 2012 .

[6]  E. D. Rogdakis,et al.  Performance of solar-driven ammonia-lithium nitrate and ammonia—sodium thiocyanate absorption systems operating as coolers or heat pumps in Athens , 1996 .

[7]  M. Venegas,et al.  Study of an ejector-absorption refrigeration cycle with an adaptable ejector nozzle for different working conditions , 2012 .

[8]  J. Pátek,et al.  A computationally effective formulation of the thermodynamic properties of LiBr-H2O solutions from 273 to 500 K over full composition range , 2006 .

[9]  R. Ventas,et al.  Experimental evaluation of ammonia adiabatic absorption into ammonia–lithium nitrate solution using a fog jet nozzle , 2013 .

[10]  Jan Albers.  New absorption chiller and control strategy for the solar assisted cooling system at the German federal environment agency , 2014 .

[11]  J. C. Bruno,et al.  Analysis and parameter identification for characteristic equations of single- and double-effect absorption chillers by means of multivariable regression , 2010 .

[12]  Ming Qu,et al.  A review for research and new design options of solar absorption cooling systems , 2011 .

[13]  Antonio Lecuona,et al.  Extension of the characteristic equation to absorption chillers with adiabatic absorbers , 2012 .

[14]  M. Venegas,et al.  Experimental study of a thermochemical compressor for an absorption/compression hybrid cycle , 2012 .

[15]  C. A. Infante Ferreira,et al.  Thermodynamic and physical property data equations for ammonia-lithium nitrate and ammonia-sodium thiocyanate solutions , 1984 .

[16]  M. Venegas,et al.  Ammonia-lithium nitrate absorption chiller with an integrated low-pressure compression booster cycle for low driving temperatures. , 2010 .

[17]  M. Venegas,et al.  Optimum hot water temperature for absorption solar cooling , 2009 .

[18]  Da-Wen Sun,et al.  Comparison of the performances of NH3-H2O, NH3-LiNO3 and NH3-NaSCN absorption refrigeration systems , 1998 .

[19]  José Fernández-Seara,et al.  Study and control of the optimal generation temperature in NH3-H2O absorption refrigeration systems , 2001 .

[20]  Zeyu Li,et al.  Optimal temperature of collector for solar double effect LiBr/H2O absorption cooling system in subtropical city based on a year round meteorological data , 2014 .

[21]  Ernst Morawetz.  Sorption‐compression heat pumps , 1989 .