Design of damping systems with required frequency spectrum

AbstrAct Purpose: The presented work extends the task of synthesis with new methods, with particular focus on the method of active and passive synthesis of vibrating damping mechanical systems. This paper is concerned with the formulation and formalisation of the problem of active and passive synthesis of mechanical damping systems. Design/methodology/approach: The work proposes a combination of the synthesis method of vibrating systems with the method of determining the active force as the method for active synthesis of mechanical damping systems and the values of two-terminal damping in case passive synthesis of mechanical damping systems. Findings: The performed active and passive synthesis of restrained systems has demonstrated an ambiguity of synthesis of damping systems. The resulting structures and set system parameters are not the only ones that can be obtained in the case of the assumed frequencies. Research limitations/implications: The scope of discussion is the synthesis of discrete damping systems.

[1]  Andrzej Buchacz.  Modifications of cascade structures in computer aided design of mechanical continuous vibration bar systems represented by graphs and structural numbers , 2004 .

[2]  T. Dzitkowski,et al.  Synthesis and sensitivity of multiaxial drive systems , 2009 .

[3]  Jerzy Świder,et al.  Vibration analysis software based on a matrix hybrid graph transformation into a structure of a block diagram method , 2004 .

[4]  G. Wszołek,et al.  Physical and geometrical data acquiring system for vibration analysis software , 2005 .

[5]  Robin C. Redfield.  Dynamic System Synthesis With a Bond Graph Approach: Part II—Conceptual Design of an Inertial Velocity Indicator , 1993 .

[6]  Jerzy Świder,et al.  Hybrid graphs in modelling and analysis of discrete–continuous mechanical systems , 2005 .

[7]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[8]  Robin C. Redfield,et al.  Dynamic System Synthesis With a Bond Graph Approach: Part I—Synthesis of One-Port Impedances , 1993 .

[9]  A. Dymarek.  The sensitivity as a criterion of synthesis of discrete vibrating fixed mechanical system , 2004 .

[10]  T. Dzitkowski,et al.  Synthesis and sensitivity of machine driving systems , 2007 .

[11]  T. Dzitkowski,et al.  Modelling and synthesis of discrete–continuous subsystems of machines with damping , 2005 .

[12]  Arkadiusz Mężyk,et al.  Application of smart materials in vibration control systems , 2007 .

[13]  A. Dymarek,et al.  Design and examining sensitivity of machine driving systems with required frequency spectrum , 2008 .

[14]  D. Guidaa,et al.  Parameter identification of a full-car model for active suspension design , 2010 .

[15]  T. Dzitkowski.  Computer-aided synthesis of discrete-continuous subsystems of machines with the assumed frequency spectrum represented by graphs , 2004 .

[16]  G. Wszołek.  Modelling of mechanical systems vibrations by utilisation of GRAFSIM software , 2005 .

[17]  G. Wszołek,et al.  First-principle and data-driven model- based approach in rotating machinery failure mode detection , 2010 .

[18]  T. Dzitkowski,et al.  Searching for the values of damping elements with required frequency spectrum , 2010 .