Study on the key technologies of the Transfer Equipment Cask for Tokamak Equator Port Plug
暂无分享,去创建一个
Sun Jian | Feng Shuang | Quanjun Song | Chang Li | Quanjun Song | Wang Buyun | Gao Lifu | Huibin Cao | Sun Yuxiang | Sun Yuxiang | Ma Chengxue | Ma Chengxue
[1] Alessandro Tesini,et al. The ITER remote maintenance system , 2008 .
[2] J. P. Friconneau,et al. Transfer cask system design activities: status and plan , 2011 .
[3] Alberto Vale,et al. Path optimization for rhombic-like vehicles: An approach based on rigid body dynamics , 2011, 2011 15th International Conference on Advanced Robotics (ICAR).
[4] Mikko Siuko,et al. The remote handling systems for ITER , 2011 .
[5] Alessandro Tesini,et al. ITER in-vessel components transfer using remotely controlled casks , 2001 .
[6] Tonio Pinna,et al. Failure Mode and Effect Analysis for remote handling transfer systems of ITER , 2008 .
[7] J. P. Friconneau,et al. ITER Transfer Cask System: Status of design, issues and future developments , 2010 .
[8] S. Gicquel,et al. Preparation of interfaces in ITER for integrating the Test Blanket Systems , 2010 .
[9] R. Ferreira,et al. Active docking of a transport cask vehicle subject to 6 degrees of freedom misalignments , 1997, 17th IEEE/NPSS Symposium Fusion Engineering (Cat. No.97CH36131).
[10] Elena V. Rosa,et al. Progress on the interface between UPP and CPRHS (Cask and Plug Remote Handling System) tractor/gripping tool for ITER , 2013 .
[11] Alessandro Tesini,et al. Study of ITER equatorial port plug handling system and vacuum sealing interface , 2009 .
[12] David Hamilton,et al. An integrated architecture for the ITER RH control system , 2012 .