Grain Quality Engineering for Organic Metal Halide Perovskites Using Mixed Antisolvent Spraying Treatment

[1]  Yumeng Shi,et al.  High-Performance Photoresistors Based on Perovskite Thin Film with a High PbI2 Doping Level , 2019, Nanomaterials.

[2]  Tae Joo Shin,et al.  Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene) , 2019, Nature.

[3]  M. Green,et al.  The Impact of a Dynamic Two-Step Solution Process on Film Formation of Cs0.15 (MA0.7 FA0.3 )0.85 PbI3 Perovskite and Solar Cell Performance. , 2019, Small.

[4]  Chieng-Chung Hsu,et al.  Effect of anti-solvent mixture on the performance of perovskite solar cells and suppression hysteresis behavior , 2019, Organic Electronics.

[5]  Christopher J. Tassone,et al.  Antisolvent processing of lead halide perovskite thin films studied by in situ X-ray diffraction , 2018 .

[6]  F. Rosei,et al.  Solvent-Antisolvent Ambient Processed Large Grain Size Perovskite Thin Films for High-Performance Solar Cells , 2018, Scientific Reports.

[7]  Biao Zhang,et al.  Environmental‐Friendly Urea Additive Induced Large Perovskite Grains for High Performance Inverted Solar Cells , 2018 .

[8]  T. Ma,et al.  Enhanced Crystallization by Methanol Additive in Antisolvent for Achieving High-Quality MAPbI3 Perovskite Films in Humid Atmosphere. , 2018, ChemSusChem.

[9]  Ruixin Ma,et al.  High‐Performance Perovskite Solar Cells with Large Grain‐Size obtained by using the Lewis Acid‐Base Adduct of Thiourea , 2018 .

[10]  Meng Li,et al.  Enormously improved CH3NH3PbI3 film surface for environmentally stable planar perovskite solar cells with PCE exceeding 19.9 , 2018 .

[11]  W. Choy,et al.  Sequential Processing: Spontaneous Improvements in Film Quality and Interfacial Engineering for Efficient Perovskite Solar Cells , 2018 .

[12]  Jing Ren,et al.  Mixed antisolvents assisted treatment of perovskite for photovoltaic device efficiency enhancement , 2018 .

[13]  T. Hayat,et al.  High-Efficiency and UV-Stable Planar Perovskite Solar Cells Using a Low-Temperature, Solution-Processed Electron-Transport Layer. , 2018, ChemSusChem.

[14]  Wen-Hau Zhang,et al.  Green Anti‐Solvent Processed Planar Perovskite Solar Cells with Efficiency Beyond 19% , 2018 .

[15]  Chieng-Chung Hsu,et al.  Selection of anti-solvent and optimization of dropping volume for the preparation of large area sub-module perovskite solar cells , 2017 .

[16]  Yi-bing Cheng,et al.  Solvent-Mediated Intragranular-Coarsening of CH3NH3PbI3 Thin Films toward High-Performance Perovskite Photovoltaics. , 2017, ACS applied materials & interfaces.

[17]  Long Ji,et al.  Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells , 2017 .

[18]  Xiaofan Deng,et al.  Overcoming the challenges of large-area high-efficiency perovskite solar cells , 2017 .

[19]  M. Naughton,et al.  Solvent-induced textured structure and improved crystallinity for high performance perovskite solar cells , 2017 .

[20]  Dong Uk Lee,et al.  Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells , 2017, Science.

[21]  Yang Li,et al.  Anti-solvent dependent device performance in CH3NH3PbI3 solar cells: the role of intermediate phase content in the as-prepared thin films , 2017 .

[22]  H. Duan,et al.  Facile preparation of high-quality perovskites for efficient solar cells via a fast conversion of wet PbI2 precursor films , 2017 .

[23]  Seung Min Kim,et al.  Single-Crystal-like Perovskite for High-Performance Solar Cells Using the Effective Merged Annealing Method. , 2017, ACS applied materials & interfaces.

[24]  Martin A. Green,et al.  Perovskite Solar Cells: The Birth of a New Era in Photovoltaics , 2017 .

[25]  Henry J. Snaith,et al.  A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films , 2017 .

[26]  Yu Yu,et al.  Ultrasmooth Perovskite Film via Mixed Anti-Solvent Strategy with Improved Efficiency. , 2017, ACS applied materials & interfaces.

[27]  Xin-dong Wang,et al.  The Additive Coordination Effect on Hybrids Perovskite Crystallization and High‐Performance Solar Cell , 2016, Advanced materials.

[28]  Yiwang Chen,et al.  Pure- or mixed-solvent assisted treatment for crystallization dynamics of planar lead halide perovskite solar cells , 2016 .

[29]  Bairu Li,et al.  Chlorobenzene vapor assistant annealing method for fabricating high quality perovskite films , 2016 .

[30]  M. Green,et al.  Nucleation and Growth Control of HC(NH2)2PbI3 for Planar Perovskite Solar Cell , 2016 .

[31]  Xin Guo,et al.  Identification and characterization of the intermediate phase in hybrid organic-inorganic MAPbI3 perovskite. , 2016, Dalton transactions.

[32]  Liduo Wang,et al.  Morphology-controlled CH3NH3PbI3 films by hexane-assisted one-step solution deposition for hybrid perovskite mesoscopic solar cells with high reproductivity , 2015 .

[33]  Nam-Gyu Park,et al.  Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide. , 2015, Journal of the American Chemical Society.

[34]  Tae-Woo Lee,et al.  Planar CH3NH3PbI3 Perovskite Solar Cells with Constant 17.2% Average Power Conversion Efficiency Irrespective of the Scan Rate , 2015, Advanced materials.

[35]  Andrew C. Grimsdale,et al.  Perovskite-based solar cells: impact of morphology and device architecture on device performance , 2015 .

[36]  Kai Zhu,et al.  Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells , 2015 .

[37]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[38]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[39]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[40]  Peng Gao,et al.  Effect of Annealing Temperature on Film Morphology of Organic–Inorganic Hybrid Pervoskite Solid‐State Solar Cells , 2014 .

[41]  Bert Conings,et al.  Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach , 2014, Advanced materials.

[42]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.