Structure- and fluid-dynamics in piezo inkjet printheads

Inkjet printing is an important technology in color document production [133]. The rapid development of inkjet technology started off around the late fifties. Since then, many inkjet devices have seen the light of day. In this overview, the attention is mainly restricted to the development towards the most important inkjet concepts of today, namely continuous, piezoelectric, and thermal inkjet.

[1]  Detlef Lohse,et al.  Predictions for upscaling sonoluminescence , 1998 .

[2]  James Q. Feng.  A General Fluid Dynamic Analysis of Drop Ejection in Drop-on-Demand Ink Jet Devices , 2002 .

[3]  S. Bankoff,et al.  Long-scale evolution of thin liquid films , 1997 .

[4]  John R. Lister,et al.  SELF-SIMILAR CAPILLARY PINCHOFF OF AN INVISCID FLUID , 1997 .

[5]  Donald J. Hayes,et al.  Direct Write Using Ink-Jet Techniques , 2002 .

[6]  Yong Zhou.  Measurement of the Displacement of a Shear Mode Piezoelectric Transducer Using Laser Doppler Vibrometer , 1999 .

[7]  Marios M. Fyrillas,et al.  Dissolution or growth of soluble spherical oscillating bubbles , 1994, Journal of Fluid Mechanics.

[8]  N. de Jong,et al.  Acoustical and optical characterization of air entrapment in piezo-driven inkjet printheads , 2005, IEEE Ultrasonics Symposium, 2005..

[9]  Chris Williams,et al.  Ink-jet printers go beyond paper , 2006 .

[10]  Aa Anton Darhuber,et al.  PRINCIPLES OF MICROFLUIDIC ACTUATION BY MODULATION OF SURFACE STRESSES , 2005 .

[11]  Göran Stemme,et al.  A valve-less planar fluid pump with two pump chambers , 1995 .

[12]  D. Peregrine,et al.  The bifurcation of liquid bridges , 1990, Journal of Fluid Mechanics.

[13]  Osman A. Basaran,et al.  Small‐scale free surface flows with breakup: Drop formation and emerging applications , 2002 .

[14]  Graham D. Martin,et al.  Jet formation and late-stage ligament instability in drop-on-demand printing , 2006 .

[15]  G. Batchelor,et al.  An Introduction to Fluid Dynamics , 1968 .

[16]  T. Dupont,et al.  Drop Formation in a One-Dimensional Approximation of the Navier-Stokes Equation , 1992, physics/0110081.

[17]  David B. Wallace,et al.  Acoustic phenomena in a demand mode piezoelectric ink jet printer , 2002 .

[18]  P. Gennes,et al.  Capillarity and Wetting Phenomena , 2004 .

[19]  B. van der Sijde,et al.  Measured collisional radiative coefficients of the 4p groups of the argon I and argon II systems , 1984 .

[20]  Hsien-Hsueh Lee,et al.  Inkjet printing of nanosized silver colloids , 2005, Nanotechnology.

[21]  Herman Wijshoff.  Better printheads via simulation : flow-3D helped double the print speed of a new wide-format printer without sacrificing quality , 2007 .

[22]  Patrick K. Notz,et al.  Satellite drops: Unexpected dynamics and change of scaling during pinch-off , 2001 .

[23]  Klaus H. Ploog,et al.  Hot electron hall effect in a two-dimensional electron gas , 1985 .

[24]  Detlef Lohse,et al.  Analysis of Rayleigh–Plesset dynamics for sonoluminescing bubbles , 1998, Journal of Fluid Mechanics.

[25]  Roeland Papen,et al.  Nanolitre dispensing — a new innovation in robotic liquid handling , 1998 .

[26]  Donald J. Hayes,et al.  Microjet printing of high-precision microlens array for packaging of fiber optic components , 2002, SPIE OPTO.

[27]  Shinri Sakai,et al.  Micro-Piezoelectric Head Technology of Color Inkjet Printer , 2001 .

[28]  H. Stone,et al.  CAPILLARY BREAKUP OF A VISCOUS THREAD SURROUNDED BY ANOTHER VISCOUS FLUID , 1998 .

[29]  J. Spurk.  Boundary Layer Theory , 2019, Fluid Mechanics.

[30]  Nagano Shiojiri,et al.  Ink Jet Head with Multi-Layer Piezoelectric Actuator , 1998 .

[31]  Eiji Ando,et al.  Direct matrix-assisted laser desorption/ionization time-of-flight mass spectrometric identification of proteins on membrane detected by Western blotting and lectin blotting. , 2005, Journal of proteome research.

[32]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[33]  Frank E. Talke,et al.  Experimental and theoretical study of wave propagation phenomena in drop-on-demand ink jet devices , 1984 .

[34]  Duncan L. MacFarlane,et al.  Microjetted lenslet triplet fibers , 1996 .

[35]  S. N. Prasad,et al.  TWO-PORT ELECTROACOUSTIC MODEL OF A PIEZOELECTRIC COMPOSITE CIRCULAR PLATE , 2002 .

[36]  J. F. Dijksman.  Hydro-Acoustics of Piezoelectrically Driven Ink-Jet Print Heads , 1998 .

[37]  Steve B. Brown,et al.  Fabricating optical fiber imaging sensors using ink jet printing technology: a pH sensor proof-of-concept. , 2006, Biosensors & bioelectronics.

[38]  S. Troian,et al.  Dynamics of capillary spreading along hydrophilic microstripes. , 2001, Physical review. E, Statistical, nonlinear, and soft matter physics.

[39]  H. Le,et al.  Progress and Trends in Ink-jet Printing Technology , 1998, Journal of Imaging Science and Technology.

[40]  M. T. Plateau.  XXXVII. On the recent theories of the constitution of jets of liquid issuing from circular orifices , 1856 .

[41]  Hiroyuki Kawamoto,et al.  Cross-Talk of Multi-Nozzle in Electrostatic Inkjet System , 2006, NIP & Digital Fabrication Conference.

[42]  Jeffrey F. Morris,et al.  An experimental study of particle effects on drop formation , 2004 .

[43]  J. F. Dijksman,et al.  Hydrodynamics of small tubular pumps , 1984, Journal of Fluid Mechanics.

[44]  Scaling of Piezoelectric Drop-on-Demand Jets for High Resolution Applications , 1999 .

[45]  James L. Winkler,et al.  Accessing Genetic Information with High-Density DNA Arrays , 1996, Science.

[46]  Werner Zapka,et al.  Application of inkjet technology for the deposition of magnetic nanoparticles to form micron-scale structures , 2003 .

[47]  College de France,et al.  Molecular Weight Dependence of Spreading Rates of Ultrathin Polymeric Films , 1998 .

[48]  W. J. Merz.  Piezoelectric Ceramics , 1972, Nature.

[49]  Andrea Prosperetti,et al.  Entrapped air bubbles in piezo-driven inkjet printing: Their effect on the droplet velocity , 2006 .

[50]  Herman Wijshoff,et al.  Modeling the drop formation process in inkjet printheads , 2007 .

[51]  F. Heslot,et al.  Molecular layering in the spreading of wetting liquid drops , 1989, Nature.

[52]  David A. Tence,et al.  Ink Manifold Design of Phase Change Piezoelectric Ink Jets , 1999 .

[53]  Andrei G. Fedorov,et al.  Droplet formation and ejection from a micromachined ultrasonic droplet generator: Visualization and scaling , 2005 .

[54]  J. Lyklema,et al.  Fundamentals of interface and colloid science. Volume I: Fundamentals. , 1991 .

[55]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[56]  David A. Tence,et al.  Multiple Dot Size Fluidics for Phase Change Piezoelectric Ink Jets , 1999 .

[57]  J. Brünahl,et al.  Physics of piezoelectric shear mode inkjet actuators , 2003 .

[58]  Omar Matar,et al.  Nonlinear evolution of thin free viscous films in the presence of soluble surfactant , 2002 .

[59]  Hiroyuki Kawamoto,et al.  Droplet formation and dropping position control in electrostatic inkjet phenomena , 2005 .

[60]  Alvin U. Chen,et al.  Computational and experimental analysis of pinch-off and scaling. , 2002, Physical review letters.

[61]  M. B. Groot Wassink.  Inkjet printhead performance enhancement by feedforward input design based on two-port modeling , 2007 .

[62]  S. Herminghaus,et al.  Wetting: Statics and dynamics , 1997 .

[63]  J. W. Woods,et al.  Application of ink jet technology to a word processing output printer , 1977 .

[64]  Oliver E. Jensen,et al.  Insoluble surfactant spreading on a thin viscous film: shock evolution and film rupture , 1992, Journal of Fluid Mechanics.

[65]  C. Brennen.  Cavitation and Bubble Dynamics , 1995 .

[66]  H. C. Lee.  Boundary layer around a liquid jet , 1977 .

[67]  N. P. Hine.  Deaeration systel for a high-performance drop-on-demand ink jet , 1991 .

[68]  C. Menzel,et al.  MEMS Solutions for Precision MicroFluidic Dispensing Application , 2004 .

[69]  Evert Klaseboer,et al.  A collapsing bubble-induced micro-pump using the jetting effect , 2005 .

[70]  Andrea Prosperetti,et al.  Thermal processes in the oscillations of gas bubbles in tubes , 1998 .

[71]  G. Stemme,et al.  A valveless diffuser/nozzle-based fluid pump , 1993 .

[72]  Brian Derby,et al.  Oscillatory limited compressible fluid flow induced by the radial motion of a thick-walled piezoelectric tube. , 2003, The Journal of the Acoustical Society of America.

[73]  Howard Brenner,et al.  Droplets Speeding on Surfaces , 2001, Science.

[74]  Joachim Kretschmer,et al.  Design Parameters of a Shear Mode Piezo Printhead for a Given Resolution , 1999 .

[75]  Kenichi Kugai,et al.  A New Compact High Resolution Solid Ink Print Head and its Application to a Plate Making Printer , 1999 .

[76]  P. Marmottant,et al.  Controlled vesicle deformation and lysis by single oscillating bubbles , 2003, Nature.

[77]  W. Hardy,et al.  III. The spreading of fluids on glass , 1919 .

[78]  George Gabriel Stokes,et al.  Mathematical and Physical Papers vol.1: On the Theories of the Internal Friction of Fluids in Motion, and of the Equilibrium and Motion of Elastic Solids , 2009 .

[79]  J. Eggers.  Nonlinear dynamics and breakup of free-surface flows , 1997 .

[80]  Eiji Ando,et al.  Direct MS/MS analysis of proteins blotted on membranes by a matrix-assisted laser desorption/ionization-quadrupole ion trap-time-of-flight tandem mass spectrometer. , 2005, Journal of proteome research.

[81]  Detlef Lohse,et al.  Air entrapment in piezo-driven inkjet printheads , 2006 .

[82]  Joachim Kretschmer,et al.  Function and Performance of a Shear Mode Piezo Printhead , 1999 .

[83]  Oliver E. Jensen,et al.  The spreading of heat or soluble surfactant along a thin liquid film , 1993 .

[84]  S. Quake,et al.  Microfluidics: Fluid physics at the nanoliter scale , 2005 .

[85]  Wijshoff H.M.A.,et al.  Drop formation mechanisms in piezo-acoustic inkjet , 2007 .

[86]  C. Meinhart,et al.  The flow structure inside a microfabricated inkjet printhead , 2000, Journal of Microelectromechanical Systems.

[87]  P. Smith.  Santa Fe, New Mexico , 1969 .

[88]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[89]  R. G. Sweet.  High Frequency Recording with Electrostatically Deflected Ink Jets , 1965 .

[90]  Alberto Piqué,et al.  Direct-write technologies for rapid prototyping applications : sensors, electronics and integrated power sources , 2002 .

[91]  G. Haar.  The Acoustic Bubble , 1996 .

[92]  Sidney R. Nagel,et al.  Breakdown of scaling in droplet fission at high Reynolds number , 1997 .

[93]  S. Sakai,et al.  Dynamics of Piezoelectric Inkjet Printing Systems. , 2000 .

[94]  Michael P Brenner,et al.  The optimal faucet. , 2004, Physical review letters.

[95]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[96]  Herman Wijshoff,et al.  Flows on the nozzle plate of an inkjet printhead , 2007 .

[97]  B W.M.,et al.  AIR LOADS ON A RIGID PLATE OSCILLATING NORMAL TO A FIXED SURFACE , 1997 .

[98]  Herman Wijshoff.  Free surface flow and acousto-elastic interaction in piezo inkjet , 2004 .

[99]  Shi,et al.  Iterated instabilities during droplet fission. , 1994, Physical review letters.

[100]  Herman Wijshoff.  Manipulating Drop Formation in Piezo Acoustic Inkjet , 2006 .

[101]  William L. Grosshandler,et al.  A simple piezoelectric droplet generator , 1997 .

[102]  Anthony Fokkerweg,et al.  ON THE PROPAGATION OF SOUND . WAVES IN CYLINDRICAL TUBES , 2006 .

[103]  M. Brenner,et al.  A Cascade of Structure in a Drop Falling from a Faucet , 1994, Science.

[104]  M. Brenner,et al.  Pinching threads, singularities and the number 0.0304... , 1996 .

[105]  Minoru Usui,et al.  Development of the New MACH (MACH with MLChips) , 1999 .

[106]  R. Furbank,et al.  Drop formation from particulate suspensions , 2004 .

[107]  Martin Hegner,et al.  Rapid functionalization of cantilever array sensors by inkjet printing , 2004 .

[108]  E. Furlani.  Temporal instability of viscous liquid microjets with spatially varying surface tension , 2005 .

[109]  E. P. Furlani.  Thermal modulation and instability of newtonian liquid microjets , 2005 .

[110]  I. P. Ivanov,et al.  Oscillations of an air bubble in an ink jet , 1984 .

[111]  Detlef Lohse,et al.  Effect of an entrained air bubble on the acoustics of an ink channel. , 2008, The Journal of the Acoustical Society of America.

[112]  Andrea Prosperetti,et al.  The oscillation of gas bubbles in tubes: Experimental results , 1999 .

[113]  Andrei S. Dukhin,et al.  Fundamentals of Interface and Colloid Science , 2010 .

[114]  Detlef Lohse,et al.  Marangoni flow on an inkjet nozzle plate , 2007 .

[115]  Frank E. Talke,et al.  Axisymmetric Motion of Radially Polarized Piezoelectric Cylinder Used in Ink Jet Printing , 1983, IBM J. Res. Dev..

[116]  van de Mjg René Molengraft,et al.  Productivity Analysis of a Scanning Inkjet Printer , 2005 .

[117]  Leslie Y. Yeo,et al.  The Dynamics of Marangoni-Driven Local Film Drainage between Two Drops. , 2001, Journal of colloid and interface science.

[118]  David B. Wallace,et al.  Applicatons of Ink-Jet Printing Technology to BioMEMS and Microfluidic Systems , 2001, MOEMS-MEMS.

[119]  Xiaoguang Zhang,et al.  An experimental study of dynamics of drop formation , 1995 .

[120]  Andrea Prosperetti,et al.  The natural frequency of oscillation of gas bubbles in tubes , 1998 .

[121]  G. I. Kustova,et al.  From the author , 2019, Automatic Documentation and Mathematical Linguistics.

[122]  Aa Anton Darhuber,et al.  Thermocapillary actuation of liquid flow on chemically patterned surfaces , 2003 .

[123]  Willem Martinus Beltman.  Viscothermal wave propagation, including acousto‐elastic interaction , 2004 .

[124]  T. Kowalewski,et al.  On the separation of droplets from a liquid jet , 1996 .

[125]  Alvin U. Chen,et al.  A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production , 2002 .