Strong Magnetic Units for a Wind Power Tower Inspection and Maintenance Robot

For developing a climbing robot which is used to inspect and maintain a wind power tower, the magnetic unit is one of the key components. Based on analysis of the working conditions of the robot, the approach in this paper is to use four common kinds of magnetic units for adapting to the conical surface. The magnetic circuit of these units is given by theory analysis and is simulated using ANSYS. Moreover, the magnetic force is analysed in detail and the results prove that the magnetic force is greatly influenced by the gap between the unit and the wall surface. In this paper, the design procedures and selection criteria based on the analytical results are given. Meanwhile, these units are compared with each other with the aid of ANSYS. From the results of this comparison, it can be ascertained that the unit using Installation C has the better performance. Furthermore, the effectiveness of the magnetic unit using Installation C is verified by a prototype. The simulations and experiments show that the magnetic unit can allow the robot to keep in contact with the conical wall surface as well as the plane wall surface.

[1]  Gao,et al.  Adsorption Performance of Sliding Wall-Climbing Robot , 2010 .

[2]  Markus Eich,et al.  Design and control of a lightweight magnetic climbing robot for vessel inspection , 2011, 2011 19th Mediterranean Conference on Control & Automation (MED).

[3]  Zhengyao Yi,et al.  Development of a wall climbing robot for ship rust removal , 2009, 2009 International Conference on Mechatronics and Automation.

[4]  José Maria Azorín,et al.  Teleoperated parallel climbing robots in nuclear installations , 2006, Ind. Robot.

[5]  Jianwei Zhang,et al.  Design of a climbing robot for cleaning spherical surfaces , 2005, 2005 IEEE International Conference on Robotics and Biomimetics - ROBIO.

[6]  Dewei Li,et al.  The magnetic field analysis and optimization of permanent-magnetic adhesion device for a novel wall-climbing robot , 2009 .

[7]  Hyungpil Moon,et al.  Development of wall climbing robotic system for inspection purpose , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Dianguo Xu,et al.  Boiler maintenance robot with multi-operational schema , 2008, 2008 IEEE International Conference on Mechatronics and Automation.

[9]  Jason Jianjun Gu,et al.  A Wall Climbing Robot for Oil Tank Inspection , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[10]  S. Hirose,et al.  Machine that can walk and climb on floors, walls and ceilings , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[11]  Zhu Zhihong.  Mobile Platform of Miniature Wall-climbing Robot for Building Surface Inspection , 2011 .

[12]  Jie Xu,et al.  Analysis on Turning Stress States of Magnetic Sucking Mechanism Unit of a Large Load Wall Climbing Robot , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[13]  F. Kirchner,et al.  A Versatile Stair-Climbing Robot for Search and Rescue Applications , 2008, 2008 IEEE International Workshop on Safety, Security and Rescue Robotics.

[14]  Jun Li,et al.  A small-sized wall-climbing robot for anti-terror scout , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[15]  Dianguo Xu,et al.  Multifunctional robot to maintain boiler water-cooling tubes , 2009, Robotica.

[16]  Peisun Ma,et al.  A wall-climbing robot for labelling scale of oil tank's volume , 2002, Robotica.

[17]  Karsten Berns,et al.  CROMSCI: development of a climbing robot with negative pressure adhesion for inspections , 2008, Ind. Robot.

[18]  Jun Li,et al.  BIT Climber: A centrifugal impeller-based wall climbing robot , 2009, 2009 International Conference on Mechatronics and Automation.

[19]  Shigeo Hirose,et al.  Walking and running of the quadruped wall-climbing robot , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.