Porous mullite and mullite–ZrO2 granules for thermal spraying applications

[1]  C. Moreau,et al.  Phase Composition and Microstructural Responses of Graded Mullite/YSZ Coatings Under Water Vapor Environments , 2011 .

[2]  J. Ferreira,et al.  A novel colloidal processing route to alumina ceramics , 2010 .

[3]  Ghislain Montavon,et al.  From Powders to Thermally Sprayed Coatings , 2010 .

[4]  J. Ferreira,et al.  Aqueous Colloidal Processing of ZTA Composites , 2009 .

[5]  B. Marple,et al.  Toward Highly Sintering-Resistant Nanostructured ZrO2-7wt.%Y2O3 Coatings for TBC Applications by Employing Differential Sintering , 2008, International Thermal Spray Conference.

[6]  C. Baudín,et al.  Synthesis of Zirconium Titanate‐Based Materials by Colloidal Filtration and Reaction Sintering , 2008 .

[7]  S. Seal,et al.  Role of Spray Drying of Nanoagglomerates in Morphology Evolution in Nanostructured APS Coatings , 2008 .

[8]  P. Miranzo,et al.  Protective Si–Al–O–Y glass coatings on stainless steel in situ prepared by combustion flame spraying , 2008 .

[9]  Xiao Dong Chen,et al.  Fundamentals of the spray freezing of foods—microstructure of frozen droplets , 2007 .

[10]  M. Belmonte,et al.  Effect of the type of flame on the microstructure of CaZrO3 combustion flame sprayed coatings , 2006 .

[11]  K. Lee,et al.  Complete oxidation of methane and CO at low temperature over LaCoO3 prepared by spray-freezing/freeze-drying method , 2006 .

[12]  D. I. Wilson,et al.  Fundamentals of spray freezing of instant coffee , 2006 .

[13]  B. Sheldon,et al.  Stability of Mullite Protective Coatings for Silicon‐Based Ceramics , 2005 .

[14]  J. Ferreira,et al.  Fabrication of Highly Porous Mullite Materials , 2005 .

[15]  T. Ohji,et al.  Development of Oxide-Based EBC for Silicon Nitride , 2005 .

[16]  C. Coddet,et al.  Spray-dried ceramic powders: A quantitative correlation between slurry characteristics and shapes of the granules , 2005 .

[17]  Xiaolin Tang,et al.  Design of Freeze-Drying Processes for Pharmaceuticals: Practical Advice , 2004, Pharmaceutical Research.

[18]  P. Grant,et al.  Low pressure plasma-sprayed Al2O3 and Al2O3/SiC nanocomposite coatings from different feedstock powders , 2003 .

[19]  K. Johnston,et al.  A novel particle engineering technology to enhance dissolution of poorly water soluble drugs: spray-freezing into liquid. , 2002, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[20]  T. Moritz,et al.  Preparation of Super Soft Granules from Nanosized Ceramic Powders by Spray Freezing , 2002 .

[21]  Hans Leuenberger,et al.  Spray Freeze-drying – The Process of Choice for Low Water Soluble Drugs? , 2002 .

[22]  K. Uematsu,et al.  Spray-freeze-dried granules for ceramics fabrication , 2002 .

[23]  Baki M. Cetegen,et al.  Towards durable thermal barrier coatings with novel microstructures deposited by solution-precursor plasma spray , 2001 .

[24]  F. Tietz,et al.  Spray-drying of ceramics for plasma-spray coating , 2000 .

[25]  J. S. Reed,et al.  Influence of Slurry Parameters on the Characteristics of Spray‐Dried Granules , 1999 .

[26]  Mahesh Mohanty,et al.  A review of: “Thermal Spray Technology - Course 51” by Materials Engineering Institute of ASM International The Materials Engineering Institute ASM International Materials Park, OH 44073-0002 , 1998 .

[27]  R. Carlsson,et al.  Homogeneous Distribution of Sintering Additives in Liquid-Phase Sintered Silicon Carbide , 1995 .

[28]  Hartmut Schneider,et al.  Mullite and mullite ceramics , 1994 .

[29]  T. Moritz,et al.  Spray freeze granulation of fine nitride powder , 1993 .

[30]  A. M. Segadães,et al.  Revised phase equilibrium relationships in the system Al2O3ZrO2SiO2 , 1992 .

[31]  H. Hausner,et al.  Euro-ceramics II , 1991 .

[32]  S. Lukasiewicz.  Spray‐Drying Ceramic Powders , 1989 .

[33]  J. Moya,et al.  Effect of ZrO2 (ss) in mullite on the sintering and mechanical properties of mullite/ZrO2 composites , 1983 .

[34]  J. Beddow,et al.  Some effects of particle shape and size upon blinding during sieving , 1968 .