A 1.9 GHz SPDT switch implemented with GaN HFETs featuring two different depth-recesses in i-AlGaN

An i-AlGaN/GaN HFET structure with two different depth-recesses formed in the i-AlGaN layer is proposed for application to a 1.9 GHz SPDT switch. In the HFET structure, an ohmic contact is formed in the deep recess to reduce the contact resistance, and a Schottky gate is formed in the shallow recess to decrease the leakage current. The off-state capacitance of the HFET was 0.23 pF and the on-state resistance was 11 /spl Omega/ at a gate length of 0.7/spl mu/m and a width of 1 mm. An SPDT switch implemented with the HFETs was fabricated, and evaluated by on-wafer measurement. The maximum handling power was 34.7dBm at the device where the through FET width was 1 mm and the shunt FET width was 0.2 mm. A higher isolation than 21 dB and a low insertion loss of 1.1 dB were realized. This performance indicates that the proposed structure is promising for high-power and high-frequency RF switches.

[1]  G. Simin,et al.  Low-loss high power RF switching using multifinger AlGaN/GaN MOSHFETs , 2002, IEEE Electron Device Letters.

[2]  Y. Uemoto,et al.  A high power Tx/Rx switch IC using AlGaN/GaN HFETs , 2003, IEEE International Electron Devices Meeting 2003.